• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.187-193
• /
• 2012

Digital X-ray image detector has been applied for medical and industrial fields. Photoconductors have been used to convert the X-ray energy to electrical signal on the direct digital X-ray image detector and amorphous selenium (a-Se) has been used as a photoconductor, normally. In this work, we use 2-dimensional device (2-D) simulator to study about physical phenomena in the a-Se, when we irradiate electromagnetic radiation (${\lambda}=486nm$) on the a-Se surface. We evaluate the electron-hole generation rate, electron-hole recombination rate, and electron/hole distribution in the a-Se using 2-D simulator. This simulator divides the device into triangle and calculates using interpolation method. This simulation method has been proposed for the first time and we expect that it will be applied for the development of digital X-ray image detector.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.32-42
• /
• 2017

The aim of this study was to evaluate driving performance of Healthy and disabled groups (with or without driver's license) to control steering wheel by using steering assistive devices in the driving simulator. The persons with partial loss of use of all four limbs have problems in operation of the motor vehicle because of functional loss to operate steering wheel. Therefore, if steering assistive devices for grasping the steering wheel are used to control the vehicle on the road in persons with disabilities, the disabled persons can improve mobility in their community life by driving a motor vehicle safely. Ten healthy subjects (with or w/o driver's license) and ten subjects with physical disabilities (with or w/o driver's license) were involved in this study to evaluate driving performance to operate steering wheel by using four types of steering assistive devices (Single-pin, V-grip, Palm-grip, Tri-pin) in driving simulator. STISim Drive 3 software was used to test the steering performance in four scenarios: straight road at low and high speed of vehicle (40 km/h and 80 km/h), curved road at low and high speed of vehicle (40 km/h and 80 km/h). This study used two-way ANOVA in order to compare the effects of two factors (type of steering assistive device and subject group) in the three dependent variables of driving performance (the lateral position of vehicle, standard deviation of lateral position representing the variation of the left and right movement of the vehicle and the number of line crossing). The mean values of the three dependent variables (lateral position, standard deviation of lateral position, the number of line crossing) of steering performance were statistically significantly smaller for the healthy or disabled groups with driver's license than the other groups without driver's license on the curved road at high speed of vehicle compared to low speed of vehicle.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.149-156
• /
• 2011

Considerable evaluation is needed to design a new longitudinal tunnel in advance because it damaged drivers' driving safety and heightened the possibility of traffic accidents with its physical characteristics. Specifically, considering traffic psychological and ergonomic factors was very important to prevent the difficulty of maintaining safe speed, the increase of the drowsy driving, the fatality of traffic accidents, and subjective feelings such as anxiety while driving a car through the tunnel, from design to construction. This study dealt with driving safety evaluation of an original road alignment design for the longitudinal tunnel (length: above 10km) with a driving simulator, and helped us to improve an original road alignment design and make an alternative road alignment design with presenting risky districts. The results of experiment showed that inflection points were revealed more risky districts, because they impaired driving safety and elevated driver workload while driving a car through around the inflection points of two-way route. Finally, the limitations and implications of this study were discussed.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.45-51
• /
• 2002

In Line Heating method, heating line is determined by kinematics analysis. But the heating line, which is solved by kinematics analysis, doesn't verify by the point of physical analysis and the choice problem in many heating line doesn't determine. In this paper, the simulator is developed. When we get the processing information at the kinematics analysis, simulator can estimate the shape of deformed plate that process along the processing information. When we get the initial shape and the object shape, we calculate the processing information first, using kinematics analysis. In a simulator, we estimate deformed shape from the processing information. After this we compare deformed shape and object shape. If the error of deformed shape and object shape is in the proper limits, that information is determined the final processing information. Else we repeat the process changing variables.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.191-198
• /
• 2008

6LoWPAN (IPv6 Low-power Wireless Personal Area Network) is IPv6 packets transmission technology at Sensor network over the IEEE 802.15.4 Standard MAC and Physical layer. Adaptation layer between IP layer and MAC layer performs fragmentation and reassembly of packet for transmit IPv6 packets. RFC4944, IETF 6LoWPAN WG standard document define packet fragmentation and reassembly. In this paper, we propose the 6PASim (6LoWPAN Packet Simulator) to perform IPv6 packet fragmentation and reassembly for performance evaluation. The 6PASim consist of two parts. One is Packet_Transmit_module that makes IEEE 802.15.4 frames the IPv6 packet from upper layer, and transmit its. and the another is Packet_Receive_module that reassembles transferred frames and completes original IPv6 packets. we can evaluate frame transmit rate and amount of control message through 6PASim. The result of simulation shows the SRM (Selective Retransmission Method) scheme provider better performance than IRM (Immediate Retransmission Method) scheme.

• Journal of Digital Contents Society
• /
• v.11 no.4
• /
• pp.463-471
• /
• 2010

In the management of a wastewater treatment plant which is a combination system of physical, chemical, and biological processes, computer simulator is an indispensable part for analysis of the operation status and evaluation of the treatment performance due to its fast computing speed. As an application software carrying out the data input-output operations and the mathematical calculations of the models, simulator is to be a powerful tool for estimating the treatment reaction and calculating mass balance of substrates, microorganisms, and chemicals within the treatment system in a given condition. Qualitative and quantitative prediction of treatment performance provides the plant manager with validity of decision-making through implementing modeling and simulation as a role of knowledge-based expert system in charge of automation and control. This paper shows the proceeding of design and development of the "WEC-Sim" software which is owned the various functions of data acquisition, monitoring, simulation, and control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.581-589
• /
• 2008

The goal of a simulator is to provide for the testing of new technologies and to facilitate the eventual transfer of these technologies to the applications. In the Development Step, Simulation can provide a cost effective alternative to expensive and hazardous field testing. In this paper, a 3D simulator is developed to test UUV navigation system bated on RVC model. The simulation system consists of a environment manager, objects and a 3D viewer. Objects are modeling all physical elements such as map, obstacle and UUV which reside in a underwater environment. Those objects are created and initialized by environment manager. The environment manager plays the role of intermediator which allows created objects to interact with each other, and transmits information on the objects to 3D viewer. The 3D viewer analyzes the received information and visualizes 3D graphic by using OpenGL primitives.

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.33-38
• /
• 2018

This paper introduces the simulation concepts and technical approach of wire-guided torpedo performance analysis simulator, as a consequence, provide a framework for understanding overall attack procedures and effectiveness of tactics to torpedo operator. It described the mathematical models of simulation components and weapon engagement principle, especially it derived the closed-form solution of time consumption and leading angle problem of torpedo attack situation based on geographical assumption. In addition, it adopted the proportional navigation guidance at final stage of torpedo attack and also consider the tradeoff relation between target ship speed(propeller noise level) and detection probability, so that it improves the fidelity of physical realism. Simulator is developed with high degree of freedom in the perspective of tactical situation, and it helps user to understand the overall situation and tactical effectiveness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.133-138
• /
• 2024

Lithium-ion batteries are used in many fields due to their high energy density, fast charging conditions, and long cycle life. However, overcharging, over-discharging, physical damage, and use of lithium-ion batteries at high temperatures can reduce battery life and cause damage to people due to fire or explosion due to damage to the protection circuit. In order to reduce the risk of these batteries and improve battery performance, the characteristics of the charging and discharging process must be analyzed and understood. Therefore, in this paper, we analyze the charging and discharging characteristics of lithium-ion batteries using a battery charger and discharger and simulator to reduce the risk of loss of life due to overcharge and overdischarge, as well as casualties from fire and explosion due to damage to the protection circuit.