• Journal of the Korean Ceramic Society
• /
• v.43 no.6 s.289
• /
• pp.351-357
• /
• 2006

The fabrication process of the honeycomb filter was investigated using synthesized cordierite with the addition of pore former and extrusion additives (either organic matter or graphite). Also, the effect of additives on the resultant properties of honeycomb filter such as porosity, thermal expansion coefficient and mechanical strength were investigated. With increasing the organic matter up to 10 wt%, porosity was increased but compressive strength was decreased. With increasing the graphite content, however, both porosity and compressive strength were increased. The specimen with an optimum processing condition (C-17A30G, sintering at $1150^{\circ}C$) was demonstrated 59% in porosity, 69 MPa in compressive strength, and $2.4{\times}10^{-6}/^{\circ}C\;(25{\sim}1000^{\circ}C$) in thermal expansion coefficient, which physical properties are appropriate for the honeycomb filter applications.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.12-17
• /
• 2003

The effects of wet pressing and drying conditions on the disintegration and physical properties of paper were investigated in order to get the basic information on the resistance of paper for aqueous solution during converting processes. Wet pressing of unbeaten bleached softwood kraft pulp increased WRV at the range of grammage investigated. The increase of WRV with grammage at low wet pressing pressure(50 psi) was obvious, while it was not significant at higher wet pressing pressure(110 psi). The changes of WRV by drying were affected by the grammage and wet pressing pressure. The poorer disintegration of sheet, the higher wet pressing pressure and drying temperature. Although the strength properties were increased with the grammage, wet pressing pressure and drying temperature, results showed different trend from those of beaten pulp.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.54-59
• /
• 2007

Cereal, computer software, wine, small appliances, and fast foods are examples of products that have switched from folding carton to microflute corrugated paperboard. Microflute corrugated paperboards have their unique wonderful packaging characteristics that are driving forces for people to use more and more. Good strength property, excellent shock absorbing ability, and beautiful outer appearance of microflute corrugated paperboards go hand and hand with their environmental advantages. It is known that physical properties of microflute corrugated paperboards depend on not only properties of base paper but corrugator operating conditions. This study was carried out to investigate on the corrugator's optimum operating conditions for making micro flute corrugated paperboards. Lab-scaled micro flute corrugator was installed and run with systematic changes of operation conditions to investigate the effects of operation conditions on physical properties of micro flute corrugated paperboards.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.172-177
• /
• 1999

In this paper, the physical and electrical properties of the synthetic fluids No. 2 class Ⅶ used the insulating oils for automobile ignition coil are studied. Also, benzotriazole(BTA) as the streaming electrification suppressant additive is added to the oil, and the change of physical and electrical properties due to different BTA concentration is investigated. To investigate the electrical characteristics, the breakdown strength of each specimen by an experiment for AC breakdown and the changes of conductivity by measuring volume resistivity are analyzed. It is considered that the effective content of BTA as charge suppressant additive is about 10[ppm] from the results of AC breakdown and volume resistivity test.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.1
• /
• pp.5-8
• /
• 1988

Physical properties of oral adhesive tablets prepared with four kinds of gums for topical or systemic drug delivery were investigated. Oral adhesive tablets containing 5mg of brilliant blue(BB) were prepared from direct compression. Viscosity of 2% gum solutions, water absorption, fracture resistance, stickiness of tablets, and dissolution of BB in pH 6.8 dissolution medium were tested. Acacia showed good stickiness and fracture resistance, and tragacanth showed good retarding effect on the release of BB from tablets. Therefore, tablets with varing ratios of acacia and tragacanth were prepared and their physical properties were examined. In conclusion, it was possible to obtain some adequate properties by compounding acacia and tragacanth.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.61-67
• /
• 2001

In this study, the fabrics were woven with worsted grams of Nm 2/72 and the structure of 5 harness satin on rapier and air-jet loom with different weft insertion mechanism and then fabrics were finished in the same processes. Also the physical properties were measured with KES-FB system and discussed with the characteristics of looms for comparing the difference of physical properties of the worsted fabrics which were woven with two different looms under the same structure. Pot shearing and compression properties, then showed similar behavior and the fabric finishing processes were seemed to affect much more than the difference of the loom types. For the surface roughness, the rapier fabrics showed higher irregularity than the air-jet fabrics.

• Journal of Fashion Business
• /
• v.7 no.3
• /
• pp.36-44
• /
• 2003

Chitosan treatment of textile fabrics has been studied to improve fabric characteristics and functions. Natural dyestuffs have been more actively employed in environment-conscious finishing products. In this study, chitosan treated cotton and nylon fabrics were prepared for dyeing with a few natural dyestuffs. These were Caesalpina sappan, Gardenia jasminoides, and cochineal in the form of powder. Hand-related physical and mechanical properties and luster characteristics were examined using the KES-FB series instruments and a set of luster measuring equipment. The chitosan treatment seemed to be more effective in terms of increasing stiffness for cotton fabric. Since cotton fibers have more -OH groups in the molecules, they provide more linkage sites with the chitosan than the nylon 6 fibers do.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.83-87
• /
• 2003

Thin films of amorphous carbon (a-C) generally combine high wear resistance with low friction coefficients and a-C films have widespread applications as protective coatings and passivation of electrical circuit and insulating layer. In this work we deposited the amorphous carbon (a-C) films on silicon substrate with a high rate DC magnetron sputtering system. It is obtained parameters on the deposition rate and physical properties of a-C films using a wide range of Ar gas pressure and DC power. The physical properties of the films were analyzed by Nanoindenter and AFM (Atomic Force Microscopy), The electrical properties were investigated by electrical conductivity measurement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.100-100
• /
• 2013

Among recently discovered 2-dimensional materials, molybdenum disulfide has fascinating physical properties. It is atomically thin and is a semiconductor with with a similar level of bandgap with silicon. Especially, its properties get interesting when it becomes thinner. Its bandgap goes through bandgap transition from indirect to direct gap. Also its gap size increases as its thickness decreases. In this talk, I am going to present our recent work on characterization of its electrical and optical properties. We used Raman and PL spectroscopy to observe its property dependence on thickness. We fabricated electrical devices to study optimal condition for MoS2 devices. Also we synthesized large-area MoS2 films for devices applications.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.106-112
• /
• 1994

Six physical properties (molecular weight, heat capacity, side chain weight, side chain volume, standard entropy and partial molar volume) of amino acids, peptides and their derivatives were examined by molecular modeling techniques. The molecular connectivity index, Wiener distance index and ad hoc descriptor are employed as structural parameters to encode information about branching, size, cyclization, unsaturation, heteroatom content and polarizability. This paper examines the correlation of the molecular modeling techique's parameters and the physicochemical properties of amino acids and their derivatives. As a result, calculated values were in agreement with experimental data in the above six physical properties of amino acids, peptides and their derivatives and the molecular connectivity index was superior to the other indices in fitting the calculated data.