• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• Ocean and Polar Research
• /
• 제28권4호
• /
• pp.475-484
• /
• 2006

In order to reveal the vertical variation of physical properties in deep-sea sediments, deep-sea sediment cores were collected at 78 stations using a multiple corer in the KR5 area, one of the Korea contract areas for manganese nodule exploration, located in the northeast equatorial Pacific. Based on the color of sediments, sampled sediment cores were characterized into three lithologic units (unit 1,2, and 3). In all sediment cores, three units appear systematically; unit 1 lies at the top of cores and unit 2 and/or unit 3 appear to underlie unit 1 or alternate with unit 3. Unit 1 layer from the top of cores shows dark grayish brown to dark brown with mean thickness of 10.2cm. Unit 2 and 3 layers show very dark brown to black color and yellowish brown to brown color, respectively. According to the physical properties of the deep-sea sediment cores, sediment column can be divided into three sections. Section A $(0{\sim}15cm)$ in subbottom depth consists mostly of unit 1. Mean values of physical properties of section B $(15{\sim}30cm)$ in subbottom depth are similar to those of section C (>30 cm) in subbottom depth. However, the physical properties of section B were more variable than those of section C because of the high activity of bioturbation in section B. These results will provide valuable information for selecting suitable sites for mining manganese nodules in the Korea contract areas.

• 지질공학
• /
• 제13권3호
• /
• pp.335-344
• /
• 2003

본 연구에서는 전라남도 장성과 화순에 분포하는 석회암풍화토의 물성 및 전단 특성을 연구하였다. 석회암풍화토의 교란시료에 대한 물성 및 전단 특성을 파악하기 위하여 실내 시험이 수행되었다. 연구지역의 석회암풍화토에 대한 물성 및 전단 특성은 다음과 같다 비중(Gs)은 2.78~2.80, 액성한계(LL)는 37~38(%), 소성지수(PI)는 13.7~15.4이며 흙의 분류(USCS)는 CL에 해당된다. 불포화 시료의 직접전단시험 (vd, $1.5t/\textrm{m}^3$)에 의한 강도정수는 점착력(c)이 3.07~4.4 ($t/\textrm{m}^2$) 그리고 내부마찰각($\Phi$)은 $34.8~42.4^{\circ}$의 범위를 보인다. 화강암풍화토 (양, 1997; 문. 1998; 박, 1998)와 비교해 보면, 연구지역의 석회암 풍화토의 물리적 특성은 일반적으로 차이를 보이며, 전단 강도정수 중, 내부마찰각은 대체적으로 유사한 경향을 보이는 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.1-10
• /
• 2003

A computer simulation was carried out to determinate the optimum capacity of bulk type trailer which is used as a tractor attachment. Soil physical properties. such as soil moisture content. bulk density, soil hardness and soil texture were measured in the 10 major rice production area for computer simulation. Mathematical model which include soil physical properties and vehicle factor was used for computer simulation. Most of the soil texture of the investigated area was silty loam. Soil moisture content ranged between 30 and 40% mostly. Soil bulk density was in the range of 1.500 to 1.700 kg/㎥. Soil hardness ranged between 1 to 18 kg/$\textrm{cm}^2$. Soil hardness incorporate the effects of many soil physical properties such as moisture content texture and bulk density, and so the range of soil hardness was greater than any other physical properties. The capacity of bulk type trailer was above 3000 kg$_{f}$ fer the most of the investigated area. and mostly in the range of 4000 to 6000 kg$_{f}$ depending upon the slip. But for the soft soil area such as Andong and Namyang. tractor itself had mobility problem and showed minus trailer capacity for some places. For this area. the capacity of bulk type trailer ranged between 1000 and 2000 kg$_{f}$ mostly so bulk type trailer should be designed as a small capacity compared to the other area.ared to the other area. area.

• Elastomers and Composites
• /
• 제40권3호
• /
• pp.181-187
• /
• 2005

가교 시스템이 다른 NR 가황물의 열노화에 의한 물성 변화를 연구하였다. 두 가지 황가교 시스템과 한 가지 레졸 가교 시스템을 도입하였으며, 가교제 함량을 변화시켰다. 황 가교시스템으로 만든 NR 가황물의 경우, $90^{\circ}C$에서 3일간 노화 후 경도와 모듈러스는 증가한 반면 신율과 인장강도는 감소하였다. 레졸 가교 시스템으로 만든 NR 가황물의 경우에는 노화 후 전반적으로 물성이 하락하였다. 열노화에 의한 물성 변화를 가교밀도의 변화로 설명하였다. 노화 후, 황 가교 시스템으로 만든 NR 가황물의 가교밀도는 증가한 반면, 레졸 가교 시스템으로 만든 NR 가황물의 가교밀도는 감소하였다. 노화방지제의 이동이 물성에 미치는 영향에 대해서도 조사하였다. 그러나 노화방지제의 이동으로는 노화에 의한 물성의 변화를 충분히 설명할 수 없었다.

• 한국콘텐츠학회논문지
• /
• 제22권3호
• /
• pp.586-592
• /
• 2022

본 연구는 기존의 치면열구전색재 ConciseTM에 세륨옥사이드 나노입자(Cerium oxide nano particles; CNPs)를 0-4.0 wt%를 첨가하여 새로운 치면열구전색재를 제조하여 물리적 성질과 세포독성을 평가하였다. 물리적 성질은 중합깊이, 물흡수도와 용해도를 측정하였고 세포독성평가는 불멸화된 구강점막세포(Immortalized human oral keratinocyte (IHOK))를 이용하여 MTT assay법으로 평가하였다. 실험 결과 중합 깊이는 CNPs 첨가량이 증가할수록 감소하였고, 용해도는 CNPs를 2.0 wt% 첨가된 실험군에서 가장 낮은 값을 보였으며 물흡수도는 각 실험군별 유의한 차이는 나타나지 않았다(p>0.05). 세포독성 실험 결과는 모든 실험군에서 높은 세포 생존율을 보였다. 이는 CNPs가 물리적 성질을 크게 약화 시키지 않으며 세포독성을 나타내지 않았으므로 생체 적합성을 입증하였다. CNPs의 특성을 고려하여 향후 CNPs의 효율적인 분산 기술에 대한 추가 연구가 필요할 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권2호
• /
• pp.134-147
• /
• 2022

The objective of this study is to determine the effect of fiber direction arrangement and layer composition of hybrid bamboo laminate boards on the physical and mechanical properties. The raw material used was tali bamboo (Gigantochloa apus (J.A. & J.H. Schultes) Kurs) rope in the form of flat sheets (zephyr) and falcata veneer (Paraserianthes falcataria (L) Nielsen). Zephyr bamboo was arranged in three layers using water-based isocyanate polymer (WBPI) with a glue spread rate of 300 g/m². There were variations in the substitution of the core layer with falcata veneers (hybrid) as much as two layers and using a glue spread rate of 170 g/m². The laminated bamboo board was cold-pressed at a pressure of 22.2 kgf/cm² for 1 h, and the physical and mechanical properties were evaluated. The results showed that the arrangement of the fiber direction significantly affected the dimensional stability, modulus of rupture, modulus of elasticity, shear strength, and screw withdrawal strength. However, the composition of the layers had no significant effect on the physical and mechanical properties. The bonding quality of bamboo laminate boards with WBPI was considered to be quite good, as shown by the absence of delamination in all test samples. The bamboo hybrid laminate board can be an alternative based on the physical and mechanical properties that can meet laminated board standards.

• 아동학회지
• /
• 제28권4호
• /
• pp.245-264
• /
• 2007

This study analyzed physical knowledge displayed in the utterances of 10 Korean children 23 - 76 months of age. Utterances were blocked into four-month time periods, except the first two months and classified into 5 categories including properties of physical objects and materials, friction, buoyancy, gravity, and the motion of physical objects. All five types of physical expressions were found in the data of the earliest period the percent age of the properties and motion was higher than the percent of friction, buoyancy, and gravity. Data suggested two transitional points of change in physical knowledge : 2-year-old's descriptions were based only on perceptually salient physical features 3- to 4-year-olds described only end-state results while children older than 4 included systematic causality.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.39-47
• /
• 2000

This study was carried out to investigate the effect of the type of base papers containing Sw-BDP, HW-BDP and Bamboo-BKP on the properties and printabilities of coated papers. Also it was intended to evaluate the effect of coated paper prepared with anionic and amphoteric latex based coating color. The results obtained from this study were as follows. The fiber length of Bamboo-BKP was observed longer than that of the Hw-BKP and shorter than that of the Sw-BKP. This has effect on physical properties. Therfore the results of mea-suring physical properties were higher ratio of Sw-BKP physical properties tended to be slightly higher with the increase I the mixing ratio. Considering the optical properties of base papers the highest opacity was obtained in case of the Hw-BKP and the second appeared Bamboo-BKP. On the other hand smoothness roughness and air permeability of Bamboo-BKP were lower than those of wood pulp and the optical properties of coated papers tended to show the similar with those of base papers. The ink receptivity and print gloss of the coated papers for Bamboo-BKP were lower than those of wood pulp. As the mixing ratio of Sw-BKP was increased the properties and printabilities were improved slightly. Meanwhile amphoteric latex was improved the optical properties and printability of coated papers.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.694-697
• /
• 2015

We investigated the characterizations of carbon films fabricated by dual magnetron sputtering under various RF powers for the improvement of physical properties in carbon fiber (CF). All sputtered carbon films exhibited amorphous structure, regardless of RF powers, resulting in uniform and smooth surfaces. The hardness and elastic modulus are increased with the increase of RF power, and the adhesion and friction properties of carbon films were improved with the increase of RF power. In the results, The increase of RF power in the sputtering method improved tribological properties of the carbon films, and these attributes can be expected to improve the physical properties of the carbon fiber reinforcement plastics.