• 대한임상전기생리학회지
• /
• 제1권2호
• /
• pp.31-38
• /
• 2003

This study was to compared the effectiveness of piroxicam gel phonophoresis with conventional ultrasound therapy in knee osteoarthritis. Eighteen patients with a means age of $55.7{\pm}5$ years were randomly assigned to phonophoresis or ultrasound groups. Continuous ultrasonic waves of 1 MHz frequency and $1\;W/cm^2\;SATA_i$ were applied for 5 minutes to the target knee joint. This study indicated their pain level by marking on a visual analog scale(VAS) at the start of treatment and at the end of 3day. Osteoarthritis VAS scores, pain on rest state, non weight bearing range of motion, 20 meters walking, and walking step by the patients were evaluated before and after therapy. Both therapeutic modalities were found to be effective and generally well tolerated after 3 therapy sessions. But piroxicam phonophoresis was not superior to conventional ultrasound in patients with knee osteoarthritis.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.35-40
• /
• 1992

Porous glass in the ZrO2-SiO2 system containing up to 30 mol% zirconia were prepared from the mixed solutions of Zr(O.nC3H7)4 and partially prehydrolyzed TEOS by the sol-gel method. Pore characteristics, physical properties and alkali resistance were investigated. The gels converted into the porous glass by heating at $700^{\circ}C$, it was found that the glass like skeleton was already made up in lower temperature regions. The specific surface area of the porous glass was 227 $m^2$/g, average mean pore size was about 19$\AA$ and porosity was 19.2%, pore characteristics and physical properties depended on heating temperature. Alkali resistance of the porous glass increased as the zirconia content increased, because of the appearance of Zr-enriched layer at glass surface.

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1205-1210
• /
• 1999

Ceria based electrolytes were fabricated by a plasma spraying method. The porosity which was crated during the plasma spraying process was infiltrated with Ce0.8Gd0.2O2 sol by ultrasonic treatment and heat treatment at 90$0^{\circ}C$ in order to improve physical and electrical properties. The porosity decreased from 9.8% to 6.5% and gas permeability at 80$0^{\circ}C$ decreased from 16.7$\times$10-3 to 5.7$\times$10-3 cm3(STP)/cm2.s.cmHg as the number of treatment increased 10 cycles. The ionic conductivity was also increased about 30% after 10 times of sealing.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.132-137
• /
• 2015

A self actuated photocatalyst $Weltouch^{(R)}$ used to the remove the odor gases generated in the foaming process of shoes insole was prepared by sol-gel method and studied its property. Specially, with mixing $Weltouch^{(R)}$ in the foaming process of shoes insole, the physical functionality such as specific gravity, hardness, elongation, compression set was studied. The physical functionality of shoes insole was no variation by added $Weltouch^{(R)}$. The odor gases generated in the foaming process of shoes insole was detected to be reduced to 60~80% by self actuated photocataylst $Weltouch^{(R)}$ even in the dark conditions, which was observed for both anatase and rutile phase.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.116-121
• /
• 2005

폐수 처리를 위한 PVA 포괄 고정화 담체의 특성에 관한 연구를 실시하였다. 특히 PVA의 고정화 조건에 따른 용해도의 영향, 첨가제가 PVA 물성에 미치는 영향, 제작된 PVA gel의 질산화 처리 효율을 살펴보았다. PVA gel 제작 과정 중 진공을 걸어줄수록 그리고 동결온도가 낮을수록 PVA gel의 용해도는 감소하였다. PAC와 같은 첨가제를 넣었을 때 PVA gel의 용해도는 감소하였고 특히 organoclay를 넣었을 때 PAC에 비하여 25% 낮은 용해도를 보였다. 질산화 효율면에서는 PVA로 코팅한 담체가 기존의 부착 담체에 비하여 용질과 산소 확산의 제한 때문에 질산화율이 낮게 관찰되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.20-21
• /
• 2006

In this paper, we studied the influence of EVA sheet gel content on photovoltaic module durability. Depending on thermal curing temperature and time during lamination, there are dramatic changes on chemical and physical characteristics. To find the optimum PV module process condition, Glass/EVA/Back Sheet scheme was made. Gel Content, FT-IR spectrum and SEM were used for the detail analysis. From these results, $110^{\circ}C/6min$ and $130^{\circ}C/4min$ lamination condition could be suggested for the best one for durable PV module processing. The further analysis is described in the following paper.

• 폴리머
• /
• 제29권1호
• /
• pp.91-95
• /
• 2005

화학적 가교와 방사선 가교에 의해 내열특성을 가진 PVA 수화젤을 제조하였다. 제조된 수화젤의 젤화율, 팽윤도와 젤강도 같은 기계적 특성을 측정하였다. 젤화율은 화학적 가교 반응시간과 방사선 조사선량이 증가할수록 증가하였고, 화학적 가교 후에 방사선 가교를 했을 경우에 화학적 가교만 했을 때보다 높은 값을 보였다. 젤강도는 화학적 가교 반응시간이 증가할수록 증가하였고, 방사선 조사선량이 감소할수록 증가하였다. 5시간 화학적 가교만 한수화젤과 화학적 가교 후에 방사선 가교를 한 수화젤이 고온에서의 내열특성이 우수하였다.

• 한국식품저장유통학회지
• /
• 제30권4호
• /
• pp.589-601
• /
• 2023

Malaysian honey is rich in nutrients and bioactive compounds, which can be a healthy alternative to refined sugar in food production. However, liquid honey's viscous and sticky nature makes it unpreferable in industrial handling. This study, an atomization system coupled with vacuum drying to produce honey powders to overcome the problem. Three types of Malaysian honey, namely Acacia, Gelam, and Tualang, were encapsulated in Ca-alginate gel beads using the atomization system. The density viscosity, and surface tension of the honey-alginate solutions were measured, and the concentration of honey and alginate influenced the physical properties of the solutions. Honey-encapsulated gel beads in the size range of 2.16-2.92 mm were produced using the atomization system with the air-liquid mass flow rate ratios of 0.22-0.31, Weber number (We) of 112-545, and Ohnersorges number (Oh) of 0.35-10.46. Gel bead diameter can be predicted using a simple mathematical model. After vacuum drying, the honey gel powder produced was in the size range of 1.50-1.79 mm. Results showed that honey gel powders with good encapsulation efficiency and high honey loading could be produced using the atomization system and vacuum drying.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.97-97
• /
• 2002

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1993년도 ACT 93
• /
• pp.877-881
• /
• 1993