• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.1 no.2
• /
• pp.31-38
• /
• 2003

This study was to compared the effectiveness of piroxicam gel phonophoresis with conventional ultrasound therapy in knee osteoarthritis. Eighteen patients with a means age of $55.7{\pm}5$ years were randomly assigned to phonophoresis or ultrasound groups. Continuous ultrasonic waves of 1 MHz frequency and $1\;W/cm^2\;SATA_i$ were applied for 5 minutes to the target knee joint. This study indicated their pain level by marking on a visual analog scale(VAS) at the start of treatment and at the end of 3day. Osteoarthritis VAS scores, pain on rest state, non weight bearing range of motion, 20 meters walking, and walking step by the patients were evaluated before and after therapy. Both therapeutic modalities were found to be effective and generally well tolerated after 3 therapy sessions. But piroxicam phonophoresis was not superior to conventional ultrasound in patients with knee osteoarthritis.

• Journal of the Korean Ceramic Society
• /
• v.29 no.1
• /
• pp.35-40
• /
• 1992

Porous glass in the ZrO2-SiO2 system containing up to 30 mol% zirconia were prepared from the mixed solutions of Zr(O.nC3H7)4 and partially prehydrolyzed TEOS by the sol-gel method. Pore characteristics, physical properties and alkali resistance were investigated. The gels converted into the porous glass by heating at $700^{\circ}C$, it was found that the glass like skeleton was already made up in lower temperature regions. The specific surface area of the porous glass was 227 $m^2$/g, average mean pore size was about 19$\AA$ and porosity was 19.2%, pore characteristics and physical properties depended on heating temperature. Alkali resistance of the porous glass increased as the zirconia content increased, because of the appearance of Zr-enriched layer at glass surface.

• Journal of the Korean Ceramic Society
• /
• v.36 no.11
• /
• pp.1205-1210
• /
• 1999

Ceria based electrolytes were fabricated by a plasma spraying method. The porosity which was crated during the plasma spraying process was infiltrated with Ce0.8Gd0.2O2 sol by ultrasonic treatment and heat treatment at 90$0^{\circ}C$ in order to improve physical and electrical properties. The porosity decreased from 9.8% to 6.5% and gas permeability at 80$0^{\circ}C$ decreased from 16.7$\times$10-3 to 5.7$\times$10-3 cm3(STP)/cm2.s.cmHg as the number of treatment increased 10 cycles. The ionic conductivity was also increased about 30% after 10 times of sealing.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.132-137
• /
• 2015

A self actuated photocatalyst $Weltouch^{(R)}$ used to the remove the odor gases generated in the foaming process of shoes insole was prepared by sol-gel method and studied its property. Specially, with mixing $Weltouch^{(R)}$ in the foaming process of shoes insole, the physical functionality such as specific gravity, hardness, elongation, compression set was studied. The physical functionality of shoes insole was no variation by added $Weltouch^{(R)}$. The odor gases generated in the foaming process of shoes insole was detected to be reduced to 60~80% by self actuated photocataylst $Weltouch^{(R)}$ even in the dark conditions, which was observed for both anatase and rutile phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.116-121
• /
• 2005

Immobilization technique by PVA encapsulation is an effective alternative for wastewater treatment. However little information is available about the effect of PVA characteristics on physical properties as an encapsulation media. This study aims at investigating the effect of the preparation methods of PVA and filler addition to media on the solubility of PVA. The solubility decreased as the freezing temperature decreased and the vacuum-drying was applied. Addition of the PAC (Powered Activated Carbon) and organoclay decreased the solubility of the PVA gels. Organoclay was more effective for lowering the solubility about 25% than the PAC. Nitrification with the PVA-coating media was less sufficient than with the polyurethane media due to the mass transfer restriction for oxygen and nutrients.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.20-21
• /
• 2006

In this paper, we studied the influence of EVA sheet gel content on photovoltaic module durability. Depending on thermal curing temperature and time during lamination, there are dramatic changes on chemical and physical characteristics. To find the optimum PV module process condition, Glass/EVA/Back Sheet scheme was made. Gel Content, FT-IR spectrum and SEM were used for the detail analysis. From these results, $110^{\circ}C/6min$ and $130^{\circ}C/4min$ lamination condition could be suggested for the best one for durable PV module processing. The further analysis is described in the following paper.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.91-95
• /
• 2005

The PVA hydrogels were prepared by the chemical and irradiation method to improve the heat resistance of these hydrogels at the high temperature. The physical properties such as the gel content, the degree of swelling and the gel strength for the synthesized hydrogels were examined. Gel content increased as the chemical reaction time and the irradiation dose increased, and gel content of the hydrogels were higher when the two-steps of chemical and irradiation method were used rather than only the chemical method. Gel strength increased as the chemical reaction time increased, and as the irradiation dose decreased. The hydrogels prepared by the chemical reaction for 5 hours and the two-steps had the heat resistance at the high temperature.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.589-601
• /
• 2023

Malaysian honey is rich in nutrients and bioactive compounds, which can be a healthy alternative to refined sugar in food production. However, liquid honey's viscous and sticky nature makes it unpreferable in industrial handling. This study, an atomization system coupled with vacuum drying to produce honey powders to overcome the problem. Three types of Malaysian honey, namely Acacia, Gelam, and Tualang, were encapsulated in Ca-alginate gel beads using the atomization system. The density viscosity, and surface tension of the honey-alginate solutions were measured, and the concentration of honey and alginate influenced the physical properties of the solutions. Honey-encapsulated gel beads in the size range of 2.16-2.92 mm were produced using the atomization system with the air-liquid mass flow rate ratios of 0.22-0.31, Weber number (We) of 112-545, and Ohnersorges number (Oh) of 0.35-10.46. Gel bead diameter can be predicted using a simple mathematical model. After vacuum drying, the honey gel powder produced was in the size range of 1.50-1.79 mm. Results showed that honey gel powders with good encapsulation efficiency and high honey loading could be produced using the atomization system and vacuum drying.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.97-97
• /
• 2002

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.877-881
• /
• 1993