재활용 고밀도 폴리에틸렌(HDPE)에 Perbutyl peroxide(PBP)를 첨가하여 반응 용융가공에 의한 가교 특성 및 물성 변화를 살펴보았다. 그 결과, 재활용 HDPE에 포함되어 있는 다양한 이물질의 성분을 EDS를 이용하여 분석하였으며 수지의 재활용 시 포함된 유, 무기물이 가교 반응에 영향을 미침을 확인하였다. 또한 물성 측정을 통해 재활용 가교 HDPE가 신재 HDPE와 비교하여 낮은 밀도, 용융엔탈피 그리고 높은 용융점도를 가짐으로 보아 상대적으로 신재 가교 HDPE에 비하여 가교가 더 잘 일어남을 알 수 있으며 이러한 재활용 HDPE의 가교 특성은 가교에 의한 재환용 HDPE의 기계적 물성 증가에 기여함을 확인하였다.
제지 공정에 있어서 지력 증강제로 사용되는 polyamide-epichlorohydrin(PAE)를 함유한 폴리비닐알코올(PVA)의 물성을 살펴보았다. PAE 첨가로 인하여 PVA의 용융과 결정화 열량이 감소될 뿐만 아니라 X-ray 결정 피크의 면적이 감소되는 것으로 보아 PAE에 의하여 PVA 가교가 진행됨을 알 수 있었다. 이러한 현상은 가수화도가 높은 PVA의 경우 더 두드러짐을 확인하였다. 하지만, 열처리에 의하여 PVA의 결정화가 일어나는 것으로 보아 PAE에 의한 PVA의 가교는 화학적 가교보다는 상대적으로 결합력이 약한 물리적 가교임을 알 수 있었다. PAE에 의한 PVA의 가교 및 결정화는 PVA의 열안정성, 기계적 강도를 증가시켜 이를 제지 공정의 지력 증강제로 사용할 경우, 종이의 건조 및 젖음 지력 향상에 효과가 있음을 알 수 있었다.
비닐화된 메조포러스 실리카와 재생 폴리에틸렌 사이에 가교결합을 도입하여 컴파운드를 제조하고 물성을 측정하였다. 메조포러스 실리카에 비닐기를 도입함으로써 비극성인 폴리에틸렌과의 가교결합을 유도할 수 있는 물질이 된다. 비닐화된 메조포러스 실리카를 합성하고 재생 폴리에틸렌과의 가교결합을 유도하여, 기존 재생 폴리에틸렌이 가지는 물성보다 더욱 향상된 재생 폴리에틸렌 복합체를 합성하였다. 또한 비닐화 된 메조포러스 실리카를 이용하였을 때, 재생 폴리에틸렌의 등급에 따라 소량 첨가하여도 가교반응이 진행되어 컴파운드의 모든 물리적 특성이 향상되었다. 비닐화된 메조포러스 실리카를 사용하여 4종의 컴파운드를 합성하였으며, 형태와 미세 구조 및 작용기는 TEM, FT-IR 및 XRD로 분석하였다. 비닐화된 메조포러스 실리카를 이용하여 재생 폴리에틸렌과 가교반응으로 3종류의 컴파운드를 배합하였다. 가교결합 유무를 확인하기 위해서 XPS, FT-IR 및 가교도 측정법으로 분석하였으며, Universal testing machine을 이용하여 인장강도, 신장율, 굴곡강도 및 굴곡 탄성율 같은 물리적 특성을 측정하였다. 그 결과, 비닐화된 메조포러스 실리카를 다양한 등급의 재생 폴리에틸렌에 적용함으로써, 기존의 재생 폴리에틸렌이 가지는 취약한 물성을 극복하였다. 비닐화된 메조포러스 실리카-재생폴리에틸렌 복합물질을 신재 폴리에틸렌에 적용한 결과, 복합 컴파운드는 상업적으로 사용할 수 있는 최선의 물성 지표를 나타내었다. 따라서 이 결과는 향후 재생 폴리에틸렌의 사용량을 증가시키고, 자원의 재순환화에 활용될 수 있을 것으로 기대된다.
International Journal of Industrial Entomology and Biomaterials
/
제45권1호
/
pp.12-16
/
2022
Di-tyrosine photo-crosslinking of silk fibroin (SF) is recently highlighted as a biocompatible hydrogel fabrication process, because this method does not need potentially harmful chemical species. However, the resulting crosslinking density is often insufficient to obtain a mechanically stiff hydrogel unless additional oxygen is provided during the reaction. In this study, we proposed a combinational crosslinking method to form an SF hydrogel via the di-tyrosine photo-crosslinking with riboflavin (photoinitiator) and physical interaction of SF chains. In the UV light-irradiated SF solution, small particles formed and these particles promoted β-sheet formation of SF molecules, resulting in quick gelation. The di-tyrosine photo-crosslinking produced nuclei that might trigger regular assembly of SF molecules in high temperature condition. Conclusively, this process would contribute to a development of biocompatible hydrogel fabrication for biomedical uses of SF hydrogels.
다면체 올리고머 실세스퀴옥산 (POSS) 중 케이지 형태 8개의 아크릴레이트 그룹을 포함하는 POSS가 에틸렌-프로필렌-디엔고무 (EPDM) 과산화물 가교에서의 가교 거동, 기계적 특성에 미치는 영향 및 열 안정성 등을 조사하였다. 고무 100 phr당 0~12 phr의 POSS를 함량 별로 혼합하고 과산화물 가교제를 첨가하여 EPDM/POSS 복합재료를 만들었다. 가교 특성 결과 POSS의 아크릴레이트 그룹이 과산화물에 의해 활성화 되었고, 과산화물 가교 효율을 향상시키는 것으로 나타났다. EPDM/POSS 복합재료에서 POSS의 분산안정성은 떨어졌지만, 복합재료의 파단 강도, 신장률 및 열 안정성은 향상되었다.
과산화물 가교제의 화학적 구조가 에틸렌 비닐 아세테이트 공중합체(EVA)의 용융 가교 반응에 미치는 영향과 가교 EVA의 물성을 살펴보았다. 한 개의 peroxy group을 갖는 perbutyl peroxide(PBP)가 두 개의 peroxy group을 갖는 2,5 dimethyl 2,5 di(tert-butylperoxyl) hexane (25B40)과 1,1-di(tert-buthylperoxy)-3,3,5-tri-methylcyclohexane(3M40) 보다 효과적으로 EVA 용융 가교 반응을 유발시킴을 확인하였으며 가교 촉진제의 사용에 따라 가교 반응 시간은 단축되나 가교도의 증가는 크지 않음을 알 수 있었다. 가교 EVA는 EVA에 비하여 가교에 의한 망상 구조에 의하여 흐름 특성은 감소하는 반면 기계적 특성이 우수해 짐을 알 수 있었다.
인체 보형물의 생체 재료로 사용할 목적으로 히아루론산 비드를 제조하였다. 히아루론산 수용액과 콩기름을 섞어서 얻어진 현탁상태에서 히아루론산을 1,3-butadiene diepoxide로 가교시켰다. 제조된 비드의 물성을 살펴보기 위해 직경, 표면적과 팽윤도를 측정하였고 전자현미경으로 표면상태를 관찰하였다. 가교제의 농도가 $5-12\;vol\%$ 범위에서 비드가 형성되었으며 제조된 비드는 단순분산성을 보였다. 히아루론산 농도 혹은 가교제 농도가 증가할수록, 가교 온도가 감소할수록, BET표면적과 팽윤도가 감소하였다. 혼합속도의 변화에 의해 비드의 물성은 거의 변하지 않았으나 비드의 크기는 효과적으로 조절되었다.
본 연구는 콘택트렌즈를 중합 시 사용하는 교차결합제의 구조가 콘택트렌즈의 물리적 특성 및 약물 용출에 미치는 영향을 조사하였다. 4종의 교차결합제를 0.3%와 3%를 각각 사용하여 콘택트렌즈를 제작하였으며 약물은 안약에 사용하는 ofloxacin을 사용하였다. 친수성 교차결합제를 사용한 콘택트렌즈는 함수율과 습윤성이 향상되었으며 친수성 작용기가 많을수록 효과가 크게 나타났다. 약물용출 농도는 친수성이 강한 교차결합제 사용 시 가장 높게 나타났으며 교차결합제의 농도가 높은 콘택트렌즈는 용출되는 약물 농도가 낮고 용출시간은 길어졌다. 콘택트렌즈의 교차결합제 구조는 콘택트렌즈의 성능 향상과 약물 방출조절에 영향을 주었다.
Chitosan is the affinitive finishing agent and gives susceptible effect in textile finishing. In order to examine the modification of polyester fabric treated with chitosan, we observed the characteristic of polyester fabric surface and measured its physical properties. For the purpose of confirming the adhesion of cationic material, we made a comparative study on anionic acid dye. The fabric was treated with crosslinking agent after chitosan finishing. Glutardialdehyde as crosslinking agent was used to improve the fixation rate of chitosan on the polyester fabric. And the US value was increased according to increasing of chitosan concentration. As the concentration of crosslinking agent was increased, whiteness index of the fabric chitosan treated was increased. Moisture regain of the fabric treated with $1\%$ chitosan was doubled and that treated with $2\%$ chitosan was tripled comparing with original fabric. Tensile strength of the chitosan treated fabric had been an increase of $10\%$ compared with alkali treated fabric and crease resistance decreased regardless of chitosan concentration.
The purpose of this experimental study was to investigate the effects of vulcanization condition on the properties of reinforced rubbers. Rubber reinforcing ability of carbon black was more efficient than other fillers, but tensile properties were not affected by vulcanization condition while vulcanization condition affected the physical properties of rubber compounds with silica and silane treated slica. It was found that silica and silane treated silica filled rubber compounds showed good dynamic properties, rebound, heat build-up, 0 and $60^{\circ}C$ tan $\delta$ compared with carbon black filled rubber compounds. Carbon black filled rubber compounds were higher than silica and silane treated silica filled rubber compounds in total crosslinking density by vulcanization condition. By analysis of crosslinking type, polysulfide crosslinking was the highest in the carbon black filled rubber compounds with decreasing the ratio of sulfur to accelerator, monosulfide crosslinking was the highest in the silane treated silica filled compounds with in-creasing the ratio of sulfur to accelerator.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.