• 한국환경보건학회지
• /
• 제47권2호
• /
• pp.123-130
• /
• 2021

Objectives: Control methods against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) aerosols have been introduced. Airborne spreading theories for SARS-CoV-2 were analyzed in this study. Methods: Control methods for airborne microorganisms were discussed. Studies on theoretical estimations for airborne spreading of SARS-CoV-2 were presented and analyzed. Analytic calculations were conducted for explaining control techniques for airborne microorganisms. Results: Control methods for SARS-CoV-2 aerosols can include physical or biological procedures. Characterization of SARS-CoV-2 aerosols and massive clustering infection cases of COVID-19 support the airborne spreading theories of SARS-CoV-2. It is necessary to consider the disadvantages of control methods for airborne microorganisms. Conclusions: A study on control methods against bioaerosols is necessary to prevent the spreading of viruses. Airborne spreading theories of SARS-CoV-2 were supported by the current evidence, but further studies are needed to confirm these theories.

• 통합자연과학논문집
• /
• 제12권2호
• /
• pp.29-34
• /
• 2019

In dental resin cement studies, viscosity is also an important factor in the adhesion of tooth defects and implants. This study used BisGMA and HPMA as the main ingredients, triethylene glycol dimethacrylate (TEGDMA) as a diluent, and benzoyl peroxide (BPO) as a photoinitiator. The physical properties of graphene oxide used as an additive for functionality were evaluated, and its use as a dental resin cement material was investigated.The rupture strength has the tendency to increase along with the increase of the ratio of graphene oxide that was added, which seemed to reflect the effect of the high strength property of graphene oxide. The flexural strength also has the tendency to increase when about 0.5% of graphene oxide was added the same as the increase of rupture strength.When graphene oxide was added, according to viscosity use, the utilization as high-quality dental resin cements will increase.

• 한국재료학회지
• /
• 제31권8호
• /
• pp.427-432
• /
• 2021

This study uses silicone monomer, DMA, crosslinking agent EGDMA, and initiator AIBN as a basic combination to prepare hydrogel lenses using fluorine-based perfluoro polyether and iron oxide and zinc oxide nanoparticles as additives. After manufacturing the lens using iron oxide nanoparticles and zinc oxide nanoparticles, the optical, physical properties, and polymerization stability are evaluated to investigate the possibility of application as a functional hydrogel lens material. As a result of this experiment, it is found that the addition of the wetting material containing fluorine changes the surface energy of the produced hydrogel lens, thereby improving the wettability. Also, the addition of iron oxide and zinc oxide nanoparticles satisfies the basic hydrogel ophthalmic lens properties and slightly increases the UV blocking performance; it also increases the tensile strength by improving the durability of the hydrogel lens. The polymerization stability of the nanoparticles evaluated through the eluate test is found to be excellent. Therefore, it is judged that these materials can be used in various conditions as high functional hydrogel lens material.

• PNF and Movement
• /
• 제9권1호
• /
• pp.55-63
• /
• 2011

Purpose : This study was to investigate the application of Rhythmic Initiation(RI) in the respect of information processing in motor learning. Methods : A computer-aided literature search was performed in PubMed and adapted to the other databases and the others were in published books. The following keywords were used: Rhythmic Initiation, attention, memory, motor accuracy, feedback, motor learning, motor control, PNF, cognition. Results : The characterization of RI is rhythmic motion of limb or body through the desired range, starting with passive motion and progressing to active resisted movement. This study suggested that the relationship between of RI and motor learning through the respect of information processing, memory, attention and motor accuracy. Conclusion : Only Rhythmic Initiation, specifically focused on the effects of information processing approach, suggesting that RI can be positively influeced on sensory-perception, attention, memory, motor accuracy. however, it is unclear whether positive effects in the laboratory and field can be generalized to improve. In addition, sustainability of motor learning with RI remains uncertain.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1441-1446
• /
• 2018

We demonstrate an acousto-optic mode converter based on a tapered optical fiber to efficiently generate orbital angular momentum states of light. In our scheme an acoustic wave is deployed to the waist of tapered optical fiber where two degenerate $HE_{21}$ modes leading to +1 and -1 orbital angular momentum eigen-modes are resonantly excited. The excitation of $TM_{01}$ and $TE_{01}$ modes is suppressed by enlarging the intermodal index difference between near-degenerate spatial modes. Numerical calculation for optimization of the taper diameter is provided. The experimental characterization of generated states is performed by analyzing the output far-field pattern and the spatial interference fringes with a uniform reference beam.

• 대한금속재료학회지
• /
• 제48권3호
• /
• pp.268-275
• /
• 2010

A new approach is described for preparing AlN thin films containing various amounts of Co content by using a two-facing targets type sputtering (TFTS) system. The deposited films were annealed isothermally at different temperatures and their microstructure, magnetic properties and resistivity were investigated. A small saturation magnetization ($4{\pi}Ms=0.52{\sim}0.85kG$) was observed irrespective of Co content in the asdeposited films. It was found that annealing conditions can control physical properties as well as the microstructure of the films. A high saturation magnetization (3.7 kG) and resistivity of $2200{\mu}{\Omega}-cm$ was obtained for AlN films containing 25 at.% Co.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 춘계학술대회 논문집
• /
• pp.237-238
• /
• 2002

Particle - bound water changes the physical and chemical properties of aerosol particles, such as size and light scattering properties. Consequently, it is necessary to remove water vapor from ambient aerosols before aerosol particles are sized and counted. Silicon gel diffusion dryer is commonly employed for this purpose. However, it can not be operated continuously While in operation, silicon gel becomes progressively more loaded with water and must periodically be regenerated by drying off the water. (omitted)

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.929-935
• /
• 1986

In this paper, we describe the physical modelling and numerical aspects of a program called PRECISE(Program for Efficient Calculation of Impurity Profile in Semiconductor by Elimination) which calcualtes a two-dimensional impurity profile in silicon due to diffusion and ion implantation steps. The PRECISE enables rapid prediction of the two-dimensional impurity profile near the mask edge-or the bird's beak during the local oxidation process. This has been developed by modifying the existing one-dimentional simulator, DIFSIM(DIFfusion SIMulator to include models for arsenic diffusion and emitter dip effect which were found out to agree fairly well with the xperimental data.

• 분석과학
• /
• 제21권1호
• /
• pp.25-33
• /
• 2008

Organic disulfide compounds are having higher theoretical capacity than the conventional cathode material and are considered as the important storage material. Here, we are reporting the preparation of poly (2,2'-dithiodianiline) PDDA/multiwall carbon nanotubes, (MWCNTs) composites under different experimental conditions. Amine functionalized and unfunctionalized MWCNTs were independently used for the preparation of composites. Composites were prepared in the presence of cetyl trimethyl bromide (CTAB), a cationic surfactant, and also in the absence of CTAB. A physical mixture of PDTDA and MWCNTs was formed with unfunctionalized MWCNTs. Grafting of PDDA onto MWCNTs was performed by chemical oxidative polymerization of 2, 2'-dithiodianiline in the presence of amine functionalized MWCNTs. The composites of MWCNTs and PDTDA were characterized for structure, morphology and thermal properties through Fourier transform infrared spectroscopy, Fourier transform Raman spectroscopy, scanning electron microscopy and UV-visible spectroscopy. The composite materials prepared by this method are expected to find applications as electrode materials for lithium batteries.

• 비파괴검사학회지
• /
• 제29권4호
• /
• pp.293-298
• /
• 2009

본 연구에서는 나노 표면층의 특성 평가를 위해 원자현미경에 초음파 특성을 결합하여 초음파 원자 현미경을 개발하였다. 초음파 원자 현미경은 기존의 나노 표면층에 대한 토포그래프 이미지뿐만 아니라 국부적인 이종부분으로 이루어진 표면에서의 물리적 특성차이에 의한 표면의 탄성 특성 이미지를 얻을 수 있다. 본 연구에서는 프로토타입의 UAFM 장치를 구성하고 이를 몇몇 응용분야에 적용하였다. 구축한 프로토타입의 UAFM 시스템을 이용하여 증착 실리콘 박막층과 냉간 압조용 강의 구상화 그리고 탄소 섬유 강화 복합재료의 표면에 대한 탄성 이미지를 성공적으로 얻을 수 있었다.