• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.5
• /
• pp.457-462
• /
• 2004

Physical properties of soybean curd powder prepared with hot air, vacuum and freeze drying methods were investigated. Adsorption characteristics were studied under various water activities (such as 0.11, 0.33, 0.44, 0.55, 0.66, 0.75, 0.85, and 0.93) at 5℃, and prediction models were developed. Equilibrium moisture and monolayer moisture contents were the highest when freeze dried. due to the porous structure. In this result, Oswin model was the best fit for the isotherm of soybean curd. Sorption enthalpy indicated that high moisture content of powder showed lower sorption than that of low moisture content.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.241-246
• /
• 2020

To develop Gastrodia elata (GE)-loaded particles for herbal extract dosage forms, various GE-loaded particles containing dextrin, isomalt, maltodextrin, and silicon dioxide as solidifying carriers in the GE water extract are prepared using the spray drying method. Their physical properties are evaluated using the repose angle, Hausner ratio, Carr's index, weight increase rate at 40℃/75% RH condition, and scanning electron microscopy (SEM). Particles made of dextrin improve the fluidity, compressibility, and water stability. In addition, 2% silicon dioxide increases the fluidity and moisture stability. The best flowability and compressibility of GE-loaded particles are observed with TP, dextrin, and silicon dioxide amounts in the ratio of 6/4/0.2 (34.29 ± 2.86°, 1.48 ± 0.03, and 38.29 ± 2.39%, repose angle, Hausner Ratio, and Carr's index, respectively) and moisture stability with a 2% weight increase rate for 14 h at 40℃/75% RH condition. Therefore, our results suggest that the particles prepared by the spray drying method with dextrin and 2% silicon dioxide can be used as powerful particles to improve the flowability, compressibility, and moisture stability of GE.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.40-46
• /
• 2024

Among the electrode manufacturing processes for lithium-ion batteries, the drying process is crucial for production speed and process cost. Particularly, as the loading level of the electrode increases to enhance the energy density of the battery, optimizing process conditions for electrode drying becomes more critical. In this study, we compared the drying time and electrochemical performance of the positive electrode prepared at different drying temperatures. LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) was used as the active material and manufactured under various drying temperature conditions ranging from 120 ℃ to 210 ℃ at loading levels of 2.5 and 4.5 mAh cm^-2. The physical and electrochemical properties of the electrodes were compared. As the loading level of the electrode increases, the drying time of the electrode also increases, but this time can be reduced by increasing the drying temperature. The drying temperature used in manufacturing the NCM622 positive electrode does not significantly affect the electrochemical performance but drying above 210 ℃ resulted in an increase in the volume resistivity of the electrode and a decrease in electrochemical performance. Accordingly, in the manufacture of high-loading electrodes, the drying temperature was increased to 190 ℃ to shorten the electrode manufacturing time without a loss of performance.

• Journal of the Korean Society of Tobacco Science
• /
• v.17 no.1
• /
• pp.68-78
• /
• 1995

A study of expanding tobacco includes the steps of adjusting the moisture content of cut tobacco, without the use of exogenous impregnants by contacting the filler with a high velocity gaseous medium at elevated temperature such that heat is rapidly and substantially uniformly transferred from the medium to the filler for a total contact time sufficient to expand the tobacco leaves. Study is disclosed for drying and expanding cut tobacco by introducing the tobacco into an elongated tubular shaped conduit through which steam high temperature 150-35$0^{\circ}C$ and high velocity above the 18m1sec, super steam is recycled. moisture content of shreded tobacco leaves, immediately before treatment within the range of from 10% to 24% and, most preferably, within the range of from 18% to 21%. Expanding rate showed 70% in NC -82(B.3) and 42% in Burley -21(B.1) which is produced in 1993 under this condition. When expanding tobacco expanded tobacco did not change significally, but they were decreased at 27$0^{\circ}C$ very largely. The curtailment of cost price and physical and chemical properties of various items were improved in cigarettes. Key words : Expanding tobacco, Super steam tobacco expansion, Fast drying tobacco, High temperature treat tobacco, Puffing tobacco.

• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.487-494
• /
• 1995

Solid lipid microspheres (SLMs) were prepared using various lipids and solidifying agents, in order to enhance the gastrointestinal absorption of Cyclosporine A (Cs A) which is a practically water-insoluble drug with low systemic bioavailability. Egg lecithin and HCO-60 (polyoxyethylated 60 mol, hydrogenated castor oil) were used as lipids. Stearic acid and stearyl alcohol were used as solidifying agents. Emulsion concentrates containing Cs A were prepared by mixing the melted lipid and solidifying agent with water, employing bile salts as a cosurfactant. SLMs were obtained by dispersing the warm emulsion concentrate in cold distilled water under mechanical stirring, followed by freeze drying. Physical characteristics of each SLM were investigated by particle size analysis, optical microscopy and scanning electron microscopy. Mean particle size of SLMs was in the range of 30 to 40.mu.m. The SLMs were in good appearance with spherical shape before freeze drying, but were deformed partially after freeze drying. Drug loading efficiencies of SLMs were observed as high as 80 to 90% in average. The systemic bioavailability of Cs A from different SLM formula was investigated in rats following oral administration. Cs A in whole blood was extracted and assayed by HPLC. SLMs revealed the higher bioavailabilities than the standard formula based on the marketed product. SLMs might have several advantages over standard formula for enhanced gastrointestinal absorption, controlled release properties, high loading capacity of the water-insoluble drug, and feasibility of solid dosage forms with better stability in storage.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.45-54
• /
• 1986

A study was conducted to determine the physical properties related to drying characteristics, the seasonal air drying curves and the kiln drying schedule for taun lumber imported and utilized. This kiln drying schedule was found by oven drying and developed by pilot testing of green lumber and partially air dried lumber. The results of this study were as follows; 1. Average green specific gravity and standard deviation of heartwood lumber were 0.60${\pm}$0.03 and those of sapwood lumber were 0.64${\pm}$0.02. 2. Radial shrinkage from green to air dry and from green to oven dry were 3.05 percent and 5.96 percent respectively, and tangential shrinkage from green to air dry and to oven dry were 5.49 percent and 8.74 percent respectively. 3. Drying time for 25mm thick green lumber (50 percent moisture content) air dried to 30 percent moisture content were 14 days in springtime. 6 days in summertime, and 12 days in autumntime, whereas for 50mm thick lumber in 36 days in springtime, 18 days in summertime, 38 days in autumntime. 4. Kiln drying schedules developed by oven drying were T8-B3 for 25mm thick lumber and T5-B2 for 50mm thick lumber. 5. Kiln drying curves of green 25mm and 50mm thick lumber were similar to those of partially air dried lumber from the level of 30 percent average moisture content. Green 25mm thick lumber (55.7 percent moisture content) was dried to 9.3 percent moisture content in 101.5 hours and green 50mm thick lumber (65.6 percent moisture content) was dried to 11.5 percent moisture content in 526 hours. 6. End checking for green 25mm thick lumber occured in 49.6 percent moisture content and reached maximum amount in 27.6 percent moisture content and closed in 15.8 percent moisture content. 7. End checking for green 50mm thick lumber and partially air dried lumber developed and reached maximum amount earlier then for 25mm thick lumber. 8. Final moisture content of surface layer for 50mm thick lumber was one half of that of core, and moisture content equalized in the lumber after nine days of room conditioning. 9. Casehardening for 50mm thick lumber was slight and was conditioned after nine days of room stroage. 10. Drying defects, such as end checking and surface checking, were not observed and the quality of dry lumber was first.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.187-190
• /
• 1994

During the initial design phases for prestressed concrete structures, the mecessary information concerning the physical properties of the hardened concrete such as creep, drying shrinkage, modulus of elasticity, and Poisson's ratio are obtained from design assumptions or accepted standards. But these assumptions may not totally reflect the actual long-term behavior of the concrete. So they may be of limited use in predicting the actual behavior. The purpose of this paper is to describe the test procedures and methods of evaluation which were used during the long-term study.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.462-475
• /
• 2015

This paper investigated the characteristics of the physical properties of woven fabrics according to the yarn structure and fibre property. It was found that wicking property of woven fabrics made of sheath/core hybrid yarn were better than those of siro spun and siro-fil hybrid yarns, which was caused by platform for transport of moisture vapor by filaments on the core part of sheath core hybrid yarns. In drying property, the fabric specimen woven by PP/Tencel sheath core hybrid yarns as a warp and Coolmax/Tencel spun yarn as a weft showed quick drying property, which was caused by the sheath core hybrid yarn structure as drainage of water moisture and coolmax fibre characteristics as quick dry material. Concerning to breathability and thermal conductivity as heat transport phenomena, it was observed that breathability of fabrics woven with hybrid yarns such as sheath core and siro-fil in the warp and hi-multi filaments in the weft showed the lowest water vapor resistance, which was explained as due to for air gap in the fibres of the spun yarns to restrict the wet heat transport from perspiration vapor. Thermal conductivities of the fabrics woven with PET/Tencel siro-fil yarns in the weft and hybrid yarns such as sheath core and siro-fil in the warp revealed the highest values, which was observed as due to higher thermal conductivity of PET than PP and more contact point between fibres in the siro-fil and sheath core hybrid yarns.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.253-270
• /
• 2016

In the wool textile industry, the necessity for technology development has been steadily raised to create improved fineness and yarn count of existing wool yarns with thick fineness for ensuring higher quality grades of wool yarn. Recently, through controlling fineness of wool yarn for making finer wool in relation with environmentally-friendly and high-sensitivity trend, a differentiated continuous drawing process where the quality of wool can be artificially manipulated has been suggested in the latest textile industry. This study investigated the basic conditions during the continuous drawing process which enable to manufacture wool yarn with fine count by controlling reducing agent treatment, physical drawing and drying after reducing agent treatment, and oxidizing agent post-treatment conditions. Furthermore, this study reviewed the drawing effects by applying the basic conditions for reduction and oxidation reaction in the drawing processes of wool/cashmere, wool/silk, wool/polyester blended yarns as well as such wool yarns. Also, in order to review the practicability, this study examined the physical properties and dyeability of drawn wool yarn applied textile materials in comparison with normal wool yarn applied textile materials.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.302-309
• /
• 2009

This study investigated the effects of infrared (IR) radiation combined with air blast thawing on the physical properties of pork. Regardless of air velocity, increasing IR dosage produced an exponential increase in the thawing rate of pork. This rate increased further when air blast velocity was increased. IR treatments showed significantly lower thawing loss than that of 0 Watt treatment, while increasing air velocity significantly increased thawing loss of pork (p<0.05). Increasing both IR power and air velocity tended to decrease the cooking loss of pork. Moreover, increased IR power tended to decrease the water holding capacity and shear force of pork. The shear force changes were not significant (p>0.05). Shear force also increased with increasing air velocity. In addition, the higher the air velocity the higher the shear force of pork. In Commission Internationale de l'Eclairage (CIE) colour determination, control of temperature prevented discolouration from overheating of sample surface. The results suggest that IR dosage combined with air blast has potential in thawed meat quality aspects, and that humidity control could prevent surface drying.