• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.569-577
• /
• 2008

The purpose of this study is focused on the development of compound classification process by mixing multitemporal data and annexing a specific image enhancement technique with a specific image classification algorithm, to gain more accurate land information from satellite imagery. That is, this study suggests the classification process using canonical correlation classification technique after principal component analysis for the mixed multitemporal data. The result of this proposed classification process is compared with the canonical correlation classification result of one date images, multitemporal imagery and a mixed image after principal component analysis for one date images. The satellite images which are used are the Landsat 5 TM images acquired on July 26, 1994 and September 1, 1996. Ground truth data for accuracy assessment is obtained from topographic map and aerial photograph, and all of the study area is used for accuracy assessment. The proposed compound classification process showed superior efficiency to appling canonical correlation classification technique for only one date image in classification accuracy by 8.2%. Especially, it was valid in classifying mixed urban area correctly. Conclusively, to improve the classification accuracy when extracting land cover information using Landsat TM image, appling canonical correlation classification technique after principal component analysis for multitemporal imagery is very useful.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.1
• /
• pp.1-19
• /
• 2020

A river bed which is submerged in water at high flow and becomes part of the river at low flow, serves as a bridge between the river and the land. The channel bar creates a unique ecosystem with vegetation adapted to the particular environment and the water pool forms a wetland that plays a very important role in the environment. To evaluate anthropogenic impacts on the river bed in the Middle Yeongsangang River, the fluvial landforms in the stream channel were analyzed using multi-temporal remotely-sensed images. In the aerial photograph of 2005 taken before the construction of the large weirs, oxbow lakes, mid-channel bars, point bars, and natural wetlands between the artificial levees were identified. Multiple bars divided the flow of stream water to cause the braided pattern in a particular section. After the construction of the Seungchon weir, aerial photographs of 2013 and 2015 revealed that most of the fluvial landforms disappeared due to the dredging of its riverbed and water level control(maintenance at 7.5El.m). Sentinel-2 images were analyzed to identify differences between before and after the opening of weir gate. Change detection was performed with the near infrared and shortwave infrared spectral bands to effectively distinguish water surfaces from land. As a result, water surface area of the main stream of the Yeongsangang River decreased by 40% from 1.144km² to 0.692km². A large mid-channel bar that has been deposited upstream of the weir was exposed during low water levels, which shows the obvious influence of weir on the river bed. Newly formed unvegetated point bars that were deposited on the inside of a meander bend were identified from the remotely sensed images. As the maintenance period of the weir gate opening was extended, various habitats were created by creating pools and riffles around the channel bars. Considering the ecological and hydrological functions of the river bed, it is expected that the increase in bar areas through weir gate opening will reduce the artificial interference effect of the weir.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.119-125
• /
• 2023

In this study, we photograph driving obstacle objects such as crosswalks, side spheres, manholes, braille blocks, partial ramps, temporary safety barriers, stairs, and inclined curb that hinder or cause inconvenience to the movement of the vulnerable using electric mobility aids. We develop an optimal AI model that classifies photographed objects and automatically recognizes them, and implement an algorithm that can efficiently determine obstacles in front of electric mobility aids. In order to enable object detection to be AI learning with high probability, the labeling form is labeled as a polygon form when building a dataset. It was developed using a Mask R-CNN model in Detectron2 framework that can detect objects labeled in the form of polygons. Image acquisition was conducted by dividing it into two groups: the general public and the transportation weak, and image information obtained in two areas of the test bed was secured. As for the parameter setting of the Mask R-CNN learning result, it was confirmed that the model learned with IMAGES_PER_BATCH: 2, BASE_LEARNING_RATE 0.001, MAX_ITERATION: 10,000 showed the highest performance at 68.532, so that the user can quickly and accurately recognize driving risks and obstacles.

• Journal of Korean Society of Forest Science
• /
• v.74 no.1
• /
• pp.67-81
• /
• 1986

To investigate the stand structure of the stocked broad-leaved forests in Korea, 1,000 plots, allocated by systematic sampling method, were interpreted on the aerial photographs accompanied with ground survey. Total area of the stocked broad-leaved forests except Jeju island was 818,286ha and the percentage to total forest area was 12.7%. Total stock volume of the stocked broad-leaved forests was $38,890,779m^3$ and the percentage to total stocked forest volume was 27.4%. Mean number of trees per ha was 947 trees/ha, basal area was $11.17m^3/ha$, DBH was 11.30cm, tree height was 7.65m, stock volume was $44.96m^3/ha$, and current annual volume increment was $3.64m^3/ha$ in total land. The 64.7, 79.8 and 52.7 percent of the stocked broad-leaved forest area were distributed at elevations of 300-900m, in slope degree of above 25, and in northern aspect, respectively. Standfactors were apt to get better with the increase of distance from the car road way and the village, and with the increase of elevation belt.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.577-586
• /
• 2002

The purpose of this in vitro study was to compare the effects of root canal cleanness following two Ni-Ti rotary instruments with different rake angle. Thirty-six sound, extracted human premolars with single root were randomly divided into three groups. The used rotary instruments were HEROShaper (Group 1, Micro-Mega, Besancon, France, n=12) and ProFile (Group 2, Maillefer, Ballaigues, Switzerland, n=12). Control group (n=12) was only extirpated with barbed broach (Mani, Matsutani Seisakusho Co., Japan) Group 1 & 2 teeth were prepared to a #40/.04 taper at the apex followed by 1 mm using crown-down technique. After canal preparation and frequent irrigation with 5.25% sodium hypochlorite, the roots split longitudinally into a bucco-lingual direction. Root halves were cross-sectioned in apical third portion again. All root specimens were processed for SEM investigation and photographed. Separate evaluations by one endodontist were undertaken for smear layer on prepared walls with a five score-index for each using reference photograph in root halves. The penetration depth of smear layer into dentinal tubules was also estimated in the other halves. Following results were obtained: 1. Smear layer was observed on all the prepared walls with two experimental groups except control group. 2. Smear layer characteristics in two experimental groups; 1) HEROShaper group showed snowy, dusty appearance and were shown open dentinal tubuli on the prepared walls of almost specimens, and the thickness of smear layer covering onto dentinal surfaces was within 1-2 ${\mu}m$ in a few specimens. 2) ProFile group showed shiny, burnished appearance and complete root canal wall covered by a homogenous smear layer with no open dentinal tubuli in all specimens. The penetration of smear layer into dentinal tubules was found in all specimens and the thickness was at 2-4 ${\mu}m$ in all specimens. These results demonstrated that a completely clean root canal could not be achieved regardless of positive or negative rake angle, which is in accordance with the majority of previous studies on root canal cleanliness In conclusion, through irrigation with antibacterial solutions or chelating agents is recommended to remove the smear layer on prepared canal wall in spite of Ni-Ti instrumentation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.

• Journal of Korean Society of Forest Science
• /
• v.13 no.1
• /
• pp.1-24
• /
• 1971

In order to elucidate the feasibility to identify the plant species through the photographic tone this study was made. In this study the author made photographs of Juniperus chinensis L., and Populus glandulosa Uyeki, with the panchromatic film using either yellow filter or red filter in different seasons respectively. The author analyzed the value of tone variation at the level of stereoscopic view of the same photographs by using tone scale and Automatic Micro-Photo-Densitometer. The results obtained are summarized as follows: A. Tone scale reading 1. The tone of Populus glandulosa Uyeki was darker than that of Juniperus chinensis L. in a photograph. 2. Regardless of the tree species, tone of photographs obtained with yellow filter was darker than that with red filter. 3. Along the progresses of seasons, the photographic tone was changed. That is, from the spring to the summer it showed darker and than, from the summer to winter it changed lighter. 4. During winter and spring the discrimination between the both species of trees can be easily made by stereoscopic view whether there are leaves on the tree or not rather than by tone observation. 5. Regardless of tree species, variation of tone due to the age was noticed. The older trees have darker tone than the younger one. 6. It is recognized that the yearly difference depends on insolation quantities. 7. The highest reflex light-waves were in between $600m{\mu}$ and $660m{\mu}$ for both species of trees. B. Density reading 1. For the density reading, there was the same tendency as in tone scale reading. 2. The changes of peaks of the scanning curves with Populus glandulosa Uyeki is smoother and takes place in lower position than with Juniperus chinensis L. 3. The scanning curves on the 20th May was smoothest, and change of peaks increased gradually according to the season progresses. 4. In relation to the types of filter the photographs with yellow filter showed less changes of peaks then that with red filter.

• Clinical and Experimental Pediatrics
• /
• v.48 no.8
• /
• pp.886-893
• /
• 2005

Purpose : Kawasaki disease is the most common cause of systemic vasculitis in children less than 5 years of age. Recent immunohistochemistry findings suggest that many vascular growth factors play a role in the formation of the coronary artery lesions. Active remodeling of the coronary artery lesions in Kawasaki disease continues in the form of intimal proliferation and neoangiogenesis for several years after the onset of the disease. Intravenous immunoglobulin(IVIG) and corticosteroid have been used in the treatment of Kawasaki disease but the exact mechanism is not clear. We have investigated that IVIG and corticosteroid inhibited vascular endothelial growth factor(VEGF)-induced tube formation of endothelial cells in vitro on Matrigel assay. Methods : Human umbilical vein endothelial cells(HUVECs) were cultured and seeded on Matrigel coated 24 well plates in medium with or without the following agents : VEGF, VEGF plus IVIG, VEGF plus VEGF antibody, VEGF plus methylprednisolone, VEGF, IVIG plus methylprednisolone for 18 hours. The total length of tube structures in each photograph was quantified. Results : IVIG significantly inhibited the proliferation of HUVECs. The inhibitory effect of IVIG was also reversible. In the meantime, VEGF induced the differentiation of HUVECs into capillary like structures on Matrigel, which was inhibited by VEGF antibody in a dose-dependent manner. Interestingly, IVIG and methylprednisolone inhibited VEGF-induced tube formation of HUVECs. IVIG was more effective in inhibition than methylprednisolone alone. Conclusion : We revealed that VEGF induced the differentiation of HUVECs and this effect was inhibited by IVIG and methylprednisolone.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2015

Gyeongju, Silla capital, hasn't paid much attention to a value of fortress as advanced frame of landscape all the while. All have done until now were maintaining lots of fortress including Gyeongju and setting night landscape lighting for them or building a trail in mountain fortress. Hereupon, this study tried to take a look at historical and scenic value of fortress, landscape frame of Gyeongju-Silla capital, based on Wolseong and Myeonghwalseong and find the way to contribute to it on landscape architectural level. As Wolseong(月城) and Myeonghwalseong(明活城) functioned as royal palace in Silla Dynasty, they need some research and study on fortress inside in detail rather than restoring them by simply maintaining the shapes. While Wolseong has overall excavation investigation going on, Myeonghwalseong representing mountain fortress area is losing its value due to unbefitting management to a title of world heritage. If conducting close research and study on these remains, it seems like it could contribute a lot to landscape architectural research of Silla royal palace through tracks, which will be used as royal palace. Here I suggest research direction on landscape architectural level about fortress remains in Gyeongju area as followings. Firstly, away from all research focusing on fortress shape, consecration way, etc, we need to conduct a research comprisable of inner space of fortress. As Wolseong and Myeonghwalseong functioned as royal palace in Silla Dynasty, it'll be possible to research about ponds, Nu-Jeong(樓亭), drainage facilities, oddly shaped stones, moundings, pavements, circulation systems, planting traces, etc. For this, we need to research and study through comparison with cases of China, Japan and Goguryeo of the same age. Secondly, applying garden archaeological way is possible to translate objectively regarding research of ancient garden with low literature record. But attainable achievement and information will be limited if implementing excavation based on archaeology as excavations so far regarding excavation investigation of Wolseong. The alternative to such problem is participation plan of landscaping field through the foundation of garden archaeology. We might be able to attain many results on landscape architectural level from research, if conducting research and study about Silla capital including Wolseong by applying garden archaeology such as collection of environmental sample and discovery and analysis of remains through aerial photograph, archaeological research, analysis of historical building, surface exploration, excavation technique, analysis of soil and flowerpot, etc. For this, many people majored in landscape architecture need to try and acquire archaeological knowledge. Also, we need to call attention to internal garden archaeology through international academic symposium by inviting global experts in garden archaeology field. I've suggested the study of location of Wolseong and Silla fortress in Gyeongju area, plan research on using and treating trees about the space in and out of fortress and landscape architectural research direction of Wolseong fortress.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.37-46
• /
• 1994

The purpose of this study was to evaluate the effect of various cements on the retention of casting crown and the cement film thickness. To evaluate the retention of crown, thirty maxillary premolars were used and prepared to largely same dimension. According to the routine method, Non-precious metal crowns were made. The teeth and the metal crowns were divided into three groups and cemented under 5kg static pressure. Group I was composed of 10 teeth and 10 metal crowns and was cemented with zinc phohsphste cement. Group II was composed of 10 teeth and 10 metal crowns and was cemented with Panavia-EX cement. Group III was composed of 10 teeth and 10 metal crowns and was cemented with All-Bond & composite resin cement. After 5 days, the cemented specimens were mounted and the failure loads were measured by an Instron Universal Testing Machine. To evaluate the cement film thickness. 5 metal teeth and 5metal crowns from a prepared maxillary premolar were made. Two marks were flawed on the margin part of each surface at 4-surfaces of each specimen(one mark : crown, the other : metal tooth) and were measured the width with SEM photograph(80 sheets) before and after cementation(Panavia-EX, All-Bond cement, & ZPC) was made. Differences of the widths of marks between before and after were measured, and differences from 4-surfaces of a specimen cemented with a cement were measured and calculated. The results were as follows ; 1. There was a statistically significant difference between the failure loads of group III and the others(p<0.05). 2. There was a statistically significant difference between the cement film thickness of group III and the others(p<0.05).