• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.157-162
• /
• 2000

The electro-optical characteristics of TN(twisted nematic)-LCD(liquid crystal display) with photo-dimerized on a PMCh(poly(4'methacryoyloxylchalcone)) surface using a new photo-dimerization method was studied. The excellent voltage-transmittance(V-T) curve of TN-LCD with photo-dimerized on a PNCh surface for 1 min. using a new photo-dimerization method was observed. Also, the voltage-hold-ing-ratio(VHR) of TN-LCD with photo-dimerized on a PMCh surface using a new photo-dimerization method is higher than that of conventional photo-dimerization method. Consequently, we suggest that the new photo-dimerization method. Consequently, we suggest that the new photo-dimerization method for LC aligning is the most promising rubbing-free techniques.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1470-1472
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• v.23 no.9
• /
• pp.1351-1354
• /
• 2002

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.177-180
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultraviolet (UV) exposure during imidization of polyimide on the polymer with side chain. The generated pretilt angle of nematic (N) LC using in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, the generated pretilt angle of NLC tends to increase by annealing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.369-372
• /
• 2004

Photo-induced surface alignment is charming as a non-contact photo-patternable alignment technology which can be used in the next generation of displays, such as large area, multi-domain. For decades, many polymer film have been investigated and developed to be used in the photo alignment. Among these photoreactive materials, recently developed polyimide, Chloromethylated Polyimide(CMPI) now became the focus of interests in this area because of its high photosensitivity and superior thermal stability. In this report, we present micro patterning method to form the nanoscale structure by Mask-Less laser patterning using this CMPI film and NSOM probe.

• Journal of Photoscience
• /
• v.7 no.2
• /
• pp.47-52
• /
• 2000

The copolymmers of N, N-dimethylaminoethyl methacrylate(DAEM) and N-arylmethacrylamide (AMA) were prepared, and their photochemical properties as a negative photoresist were studied by the measurements of insoluble fraction, and by UV and IR absorption spectral changes. These copolymers are soluble in DMF, actone, methanol, of acidic buffer solutions. Solubility of these copolymer films in the vuffer solutions increased with the amount of DAEM units in the copolymer and decreased with the pH value. The insoluble fraction of the copolymer films in the buffer solution of pH 4 of in methanol increased with irradiation time and the amount of AMA units in the copolymer. UV and IR spectral changes indicated that not only photo-crosslinking but also the photo-Fries rearrangement took place upon irradiation with a 254nm UV light.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.142-146
• /
• 2007

Poly[(1-(9-carbazoly1)ethylene)-co-(3-cinnamoyloxyoctyl-9-carbazolyl)] ethylene (PVK-Cin) was prepared by tethering cinnamate pendants to a carbazole group via an octylene spacer. The photopatternability of the new PVK based-polymer was investigated using a photocrosslinking reaction under UV light illumination $(\lambda=254nm)$. Blends of the PVK-Cin and a soluble poly(phenylene vinylene) (CzEh-PPV) were employed to study the photocrosslinking behavior. Well resolved lithographic patterns were observed in these polymer systems. PVK-Cin produced a blue light emitting pattern both before and after the photocrosslinking reaction. The blends of PVK-Cin and CzEh-PPV also showed corresponding emissions at 398 and 525 (560) nm in the film state.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.119-122
• /
• 2003

We report a dramatic increase in the photo-stability of a blue-emitting polymer, poly(9,9-dioctylfluorene), achieved by the addition of gold nanoparticles to the polymer. The optical absorption band of gold nanoparticles is tuned to resonate the triplet exciton-ground state band gap energy of the polymer. The photo-oxidation rate of poly(9,9-dioctylfluorene) was drastically reduced by doping the polymer with a very small amount ($10^{-6}-10^{-5}$ volume fraction) of gold nanoparticles. The gold nanoparticles used herein act as the quenching agent of the triplet states and can be directly applied to various blue light emitting polymer thin film ( < 100 nm ) devices.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.359-367
• /
• 2019

Poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels modified with various co-monomers, such as N-vinyl pyrrolidone (NVP), glycidyl methacrylate (GMA), and glycerol monomethacrylate (GMMA), were prepared to investigate the effect of adding a co-monomer on the water contents, surface wettability, and tensile modulus. These polymers were synthesized by thermal- and photo-polymerization in the presence of azobisisobutyronitrile (AIBN) and diphenyl(2,4,6-trimethylbenzoyl)-phosphineoxide (TPO) as the initiators. The characteristics of the hydrogels were analyzed via FTIR and UV/Vis spectroscopies, contact angle measurements, and tensile modulus measurements with UTM. Regarding the properties of water in the hydrogels, the ratio between free to bound water was investigated using differential scanning calorimetry (DSC). The effects of adding the co-monomers on the water content, surface wettability, and tensile modulus for soft contact lenses were also investigated. In the case of p(HEMA-co-NVP) hydrogels, the increase in the equilibrium water content (EWC) was primarily due to the increase in the bound water content. For p(HEMA-co-GMMA) hydrogels, an increase in free water content was the main reason for the increased EWC. In contrast, in the case of p(HEMA-co-GMA) hydrogels, a decrease in bound water content was observed to be the main factor that reduced the EWC. Photo-polymerized PHEMA hydrogels showed enhanced surface wettability and tensile modulus as compared to those produced via thermal polymerization.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1133-1135
• /
• 2009

The rolls of triplet excitons in a polymer based photovoltaic (PV) device are investigated for improving the efficiency of PV devices. Generally, the thick photo-absorbing layer can improve the PV device efficiency by increasing the photon absorption. However, in case of PV devices with singlet excitons, the efficiency is limited by the short exciton diffusion length, which depends on the mobility and lifetimes of excitons. Therefore, using the triplet excitons, which have a higher mobility and longer lifetime, can solve the problem of premature exciton dissociation caused by the shorter singlet exciton diffusion length in the thick photo-absorbing layer. In this study, the triplet exciton dynamics of a conjugated polymer in a phosphorescent dye blended polymer PV device is investigated by photo-induced absorption, and PV devices performance at various concentrations of phosphorescent dye are is also evaluated.