• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.278-278
• /
• 2009

A photovoltaic device consisting of arrays of radial p-n junction wires enables a decoupling of the requirements for light absorption and carrier extraction into orthogonal spatial directions. Each individual p-n junction wire in the cell is long in the direction of incident light, allowing for effective light absorption, but thin in orthogonal direction, allowing for effective carrier collection. To fabricate radial p-n junction solar cells, p or n-type vertical Si wire cores need to be produced. The majority of Si wires are produced by the vapor-liquid-solid (VLS) method. But contamination of the Si wires by metallic impurities such as Au, which is used for metal catalyst in the VLS technique, results in reduction of conversion efficiency of solar cells. To overcome impurity issue, top-down methods like noble metal catalytic etching is an excellent candidate. We used noble metal catalytic etching methods to make Si wire arrays. The used noble metal is two; Au and Pt. The method is noble metal deposition on photolithographycally defined Si surface by sputtering and then etching in various BOE and $H_2O_2$ solutions. The Si substrates were p-type ($10{\sim}20ohm{\cdot}cm$). The areas that noble metal was not deposited due to photo resist covering were not etched in noble metal catalytic etching. The Si wires of several tens of ${\mu}m$ in height were formed in uncovered areas by photo resist. The side surface of Si wires was very rough. When the distance of Si wires is longer than diameter of that Si nanowires are formed between Si wires. Theses Si nanowires can be removed by immersing the specimen in KOH solution. The optimum noble metal thickness exists for Si wires fabrication. The thicker or the thinner noble metal than the optimum thickness could not show well defined Si wire arrays. The solution composition observed in the highest etching rate was BOE(16.3ml)/$H_2O_2$(0.44M) in Au assisted chemical etching method. The morphology difference was compared between Au and Pt metal assisted chemical etching. The efficiencies of radial p-n junction solar Cells made of the Si wire arrays were also measured.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.288-293
• /
• 2011

본 논문은 InGaN/GaN 다중양자우물 구조를 가지는 녹색 발광다이오드의 활성층 내 인듐(In) 조성비와 piezoelectric field에 대한 전계 흡수 현상을 연구하였다. 활성층 내 결정학적 성질과 In 조성비는 double crystal X-ray diffraction 측정으로 분석하였으며, $1{\times}1\;mm^2$ 대면적 칩을 제작하여 발광특성을 조사하였다. 또한, 활성층 내 piezoelectric field는 electro-reflectance spectroscopy로부터 측정한 compensation voltage를 이용해 계산하였고, 인가전압에 따른 photocurrent의 변화를 측정함으로써 녹색 발광 소자의 전기 광학적 특성을 분석하였다.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.91-96
• /
• 2012

AC and ZnS modified $TiO_2$ composites (AC/ZnS/$TiO_2$) were prepared using a sol-gel method. The composite obtained was characterized by Brunauer-Emmett-Teller (BET) surface area measurements, X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis, scanning electron microscope (SEM) analysis, and according to the UV-vis absorption spectra (UV-vis). XRD patterns of the composites showed that the AC/ZnS/$TiO_2$ composites contain a typical single and clear anatase phase. The surface properties as observed by SEM present the characterization of the texture of the AC/ZnS/$TiO_2$ composites, showing a homogenous composition in the particles showing the micro-surface structures and morphology of the composites. The EDX spectra of the elemental identification showed the presence of C and Ti with Zn and S peaks for the AC/ZnS/$TiO_2$ composite. UV-vis patterns of the composites showed that these composites had greater photocatalytic activity under visible light irradiation. A rhodamine B (Rh.B) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of Rh.B was determined using UV/Vis spectrophotometry. An increase in the photocatalytic activity was observed. From the photocatalytic results, the excellent activity of the Y-fullerene/$TiO_2$ composites for the degradation of methylene blue under visible irradiation could be attributed to an increase in the photo-absorption effect caused by the ZnS and to the cooperative effect of the AC.

• 농촌계획
• /
• 제12권2호
• /
• pp.57-64
• /
• 2006

The experiment was carried out to determine the distribution of total coliform the translocation of heavy metals and the salt accumulation in soils following the supply of ground water, the domestic wastewater and the ultraviolet treatment of domestic wastewater during the spinach and the chinese cabbage cultivation. There were not much changes in the Total-N, Total-P and cations in soils following the ultraviolet treatment of the domestic wastewater. However, the density of total coliform was dramatically reduced from 894MPN/100mL to 5MPN/100mL. The diagnosis of composition of soil after the harvest of chinese cabbages and spinach has shown that the concentration of Na$^+$ was 3-4 times higher in plot using domestic wastewater than in plot using ground water. When domestic wastewater and ground water were used in growing spinach md chinese cabbage at 50% each, the application of chemical fertilizers reduced about 25% to 50% compared to the criteria set down by the Rural Development Administration and there was not significant difference in terms of harvest. Using non-ultraviolet treatment of domestic wastewater directly on spinach and chinese cabbage has resulted in excessive density of total coliform at 25,000MPN/100mL. Even when ultraviolet treatment, the density was still high at 2,000MPN/100mL. The high density of total coliform even following ultraviolet treatment of domestic wastewater is considered to be caused by photo-reactivation of micro-organism. When reusing domestic wastewater, the application of sterilization such as ultraviolet, ultrasonic and electron-beam for public health and hygiene reasons may provide safe supply of agricultural water.

• 한국컴퓨터그래픽스학회논문지
• /
• 제23권3호
• /
• pp.95-103
• /
• 2017

본 논문은 딥 러닝(deep learning)을 이용하여 입력 영상의 기울어진 정도를 측정하고 수평에 맞게 바로 세우는 방법을 제시한다. 기존 방법들은 일반적으로 영상 내에서 선분, 평면 등 하위 레벨의 특징들을 추출한 후 이를 이용해 영상의 기울어진 정도를 측정한다. 이러한 방법들은 영상 내에 선이나 평면이 존재하지 않는 경우에는 제대로 동작하지 않는다. 본 논문에서는 대규모 데이터 셋을 통해 영상의 다양한 특징들에 대해 학습 가능한 Convolutional Neural Network (CNN)를 이용하여 인물이나 복잡한 배경으로 구성된 기울어진 영상에 대해서도 강인하게 동작하는 프레임워크를 제시한다. 또한, 네트워크에 가변 공간적 (adaptive spatial) pooling 레이어를 추가하여 영상의 다중 스케일 특징을 동시에 고려할 수 있게 하여 영상의 기울어진 정도를 측정하는 성능을 높인다. 실험 결과를 통해 다양한 콘텐츠를 포함한 영상의 기울어짐을 높은 정확도로 바로 세울 수 있음을 확인할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.421-421
• /
• 2008

Generally, the polymer thick-film resistors for embedded organic or hybrid substrate are patterned by screen printing so that the accuracy of resistor pattern is not good and the tolerance of resistance is too high(${\pm}$20~30%). To reform these demerits, a method using Fodel$^{(R)}$ technology, which is the patterning method using a photosensitive resin to be developable by aqueous alkali-solution as a base polymer for thick-film pastes, was recently incorporated for the patterning of thermosetting thick-film resistor paste. Alkali-solution developable photosensitive resin system has a merit that the precise patterns can be obtained by UV exposure and aqueous development, so the essential point is to get the composition similar to PSR(photo solder resist) used for PCB process. In present research, we made the photopatternable resistor pastes using 8 kinds of epoxy acrylates and a conductive carbonblack (CDX-7055 Ultra), evaluated their developing performance, and then measured the resistance after final curing. To become developable by alkali-solution, epoxy acrylate oligomers with carboxyl group were prepared. Test coupons were fabricated by patterning copper foil on FR-4 CCL board, plating Ni/Au on the patterned copper electrode, applying the resistor paste on the board, exposing the applied paste to UV through Cr mask with resistor patterns, developing the exposed paste with aqueous alkali-solution (1wt% $Na_2CO_3$), drying the patterned paste at $80^{\circ}C$ oven, and then curing it at $200^{\circ}C$ during 1 hour. As a result, some test compositions couldn't be developed according to the kind of oligomer and, in the developed compositions, the measured resistance showed different results depending on the paste compositions though they had the same amount of carbonblack.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.821-826
• /
• 2008

Nanocrystallized glasses with the composition of $(50-x)BaO-xTiO_2-50SiO_2$ (x=10, 15, 16.7 and 20) have been prepared by heat-treatment at $T_x$ (crystallization onset temperature) for 3 h, and their optical properties, photoluminescence (PL), XRD and Raman spectra have been examined. The absorption edges of the glasses were red-shifted and the absorption coefficient increased with an increase of $TiO_2$. The glass subjected to the heat-treatment showed a dense formation of ${Ba_2}{TiSi_2}{O_8}$ crystals. The XRD and Raman results show that the nanocrystallized glasses formed fresnoite phase up to $TiO_2$ concentrations of 15 mol%. Further-more, blue luminescence with a peak at the wavelength of around 470nm was observed in the nanocrystallized glass, demon strating the optical multifunctional nanocrystallized material such as non-linear optics and photo-luminescence. It is thought that the blue luminescence from the ${Ba_2}{TiSi_2}{O_8}$ nanocrystallized glass originated from the presence of $Ti^{4+}$ incorporated into the fresnoite-type structure.

• 한국주거학회논문집
• /
• 제19권3호
• /
• pp.39-48
• /
• 2008

The purpose of this study was to investigate the attitude of the middle and old age about the elderly housing and the planning elements according to the types of silver town. For this study, a pre-interview and a survey method were used for data collection. A questionnaire survey of 372 women over 45 years old was carried out. Among the data, 321 cases were analyzed by SPSS for Windows V12.0. The major findings were as follows: 1) Regarding the elderly housing, While the couple cohabitation type preferred the existing housing and the general housing, the single habitation type preferred the apartment and silver town. Some people wanted silver town occupancy due to the decrease of children support burden, the other did not want it due to economical burden and the absence of homelike affection. When they move into silver town, they wanted to take money, clothes, and photo album. 2) In silver town development, while the couple cohabitation type preferred the apartment, independent house, the single type preferred the apartment, housing complex and group-home. The unit housing sizes of them were around 82.6 and 49.6 square meters respectively. In the space composition of unit housing, while the couple cohabitation type preferred bath room, kitchen, living room and two of bed room, the single type preferred one of bed room and bath room at least. On the other hand, this study found out that it was possible to plan the space for eating and washing as the common space. 3) According to single or couple, and ages, there were significant differences in preferred spatial planning elements, which needs to be reflected in the silver town development. These results can provide improvement guidelines for the development of the silver town with the differentiation of design factors for the silver town planners.

• 한국게임학회 논문지
• /
• 제7권3호
• /
• pp.59-66
• /
• 2007

광선추적법(ray tracing)은 빛의 반사, 투과 등을 사실적으로 표현할 수 있는 대표적인 전역조명(global illumination) 기술이지만, 복잡한 계산과정으로 인해 실시간 활용에는 많은 제약이 존재한다. 이런 문제를 해결하기 위해 최근에는 GPU(Graphics Processing Unit) 기반의 광선추적법 알고리즘이 활발하게 개발되고 있으며, 본 논문에서는 J. Purcell 등이 제안한 광선추적법 기법을 구현하였다. 그리고 구현된 알고리즘을 인터렉티브 응용분야에 활용하기 위해 렌더링 성능을 개선하는 두가지 방법을 적용하였다. 먼저, 그래픽스 하드웨어에서 지원하는 래스터라이제이션(rasterization)을 적용해 초기 광선의 교차점을 효과적으로 구했다. 또한 대상 물체를 가속화(acceleration) 구조로 구성하여 광선과 물체간의 교차연산에 소요되는 계산시간을 단축하였다. GPU 기반의 광선추적법 렌더링에서 다양한 성능 개선 알고리즘을 적용하여 향상된 렌더링 결과를 구체적으로 분석한 기존 연구가 비교적 적었으며, 본 논문에서는 각 과정에 따른 개선 결과를 제시하였다. 구현된 렌더러와 GPU 기반의 환경 맵을 비교하였으며 이동형 개인 컴퓨터와 무선 센싱 장비를 이용한 무선 원격 렌더링 시스템을 구현하였다. 제안된 시스템은 실시간 합성, 증강현실(augmented reality), 가상현실 등의 다양한 분야에서 활용될 것으로 기대된다.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.399-403
• /
• 2006

현재 넓은 표면적과 메조기공 뿐만 아니라 $TiO_2$의 넓은 band gap과 그 광학 활성 등으로 인하여 크게 각광받고 있는 메조포러스 $TiO_2$ 박막을 합성하기 위해 여러 가지 합성방법이 제시되고 있으나, 그 합성이 습도나 온도 등의 여러조건에 따라 크게 영향을 받아 재현성이 떨어진다는 치명적인 문제점이 제기되어 왔다. 이는 합성 용액 내에서 $TiO_2$ 전구체가 가수분해 및 축합반응을 하면서 구조유도체와의 자기조립에 의한 나노구조물 형성하는 과정에서 $TiO_2$의 전구체가 온도나 습도 등 주변의 영향을 많이 받기 때문이다. 본 연구에서는 2차원 구조의 메조기공을 가진 $TiO_2$ 박막을 재현성 있게 얻을 수 있는 실험 조건을 찾고자 하였다. 이를 위해 촉매인 HCl과 $TiO_2$ 전구체의 몰비 그리고 $TiO_2$ 전구체와 P-123의 몰비 등의 합성 조건뿐 아니라 코팅과정 도중이나 이후의 습도와 온도가 미치는 영향에 대한 실험을 수행하였고 그 특성을 XRD와 TEM 등으로 분석하였다.