• Journal of Hydrogen and New Energy
• /
• v.15 no.2
• /
• pp.166-174
• /
• 2004

Purple non-sulfur bacteria, Rhodobacter sphaeroides KD131 grew to reach the maximum cell concentration in 45 hrs of incubation in the synthetic media containing (NH4)2SO4, L-aspartic acid and succinic acid as the carbon and nitrogen sources, respectively, at 30oC under 8 klux irradiance using halogen lamp. The strain produced hydrogen from the middle of the logarithmic growth phase and continued until the cell growth leveled out. The strain grew and produced hydrogen under the irradiance of 3-30 klux, but cell growth was inhibited over 100 klux. In addition, anaerobic/light culture condition was better than the aerobic/dark on the hydrogen production. Among various photo-bioreactors examined, the flat-vertical reactor manufactured using clear acrylic plastic material showed the best hydrogen production rate at the given culture condition.

• Journal of Adhesion and Interface
• /
• v.11 no.2
• /
• pp.41-49
• /
• 2010

Furan-containing epoxide monomers (8, 9) were designed and synthesized as carbon-neutral, environment-friendly adhesion material. Bicyclic skeleton were constructed using the Diels-Alder reaction of furan and methyl acrylate, both readily accessible starting material from a biomass via bio-refinery process. After reduction of ester functionality, resulting hydroxyl moieties were coupled to epichlorohydrin to provide the epoxy-functionalized furanic monomers (8, 9). The structure of new furanic monomers was confirmed by $^1H$ and $^{13}C$ NMR spectroscopy. As UV-curable monomers, basic properties such as UV curing time and the extent of UV curing were evaluated by photo DSC. Photo-curing shrinkages were measured by linear variable differential transformer transducer (LVDT) and the effect of molecular structure on shrinkage was considered. In addition, new synthetic compounds showed the shear strength over 3 MPa when they were photo-cured between polycarbonate plates, which indicates these compounds are feasible to use as photo-curable adhesive materials.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.711-717
• /
• 2019

The application of advanced oxidation for the treatment of oil refinery wastewater under UV radiation by using nanoparticles of titanium dioxide was investigated. Synthetic wastewater prepared from phenol crystals; Power Glide SAE40 motor vehicle oil and water was used. Response surface methodology (RSM) based on the Box-Behnken design was employed to design the experimental runs, optimize and study the interaction effects of the operating parameters including catalyst concentration, run time and airflow rate to maximize the degradation of oil (SOG) and phenol. The analysis of variance and the response models developed were used to evaluate the data obtained at a 95% confidence level. The use of the RSM demonstrated the graphical relationship that exists between individual factors and their interactive effects on the response, as compared to the one factor at time approach. The obtained optimum conditions of photocatalytic degradation are the catalyst concentration of 2 g/L, the run time of 30 min and the airflow rate of 1.04 L/min. Under the optimum conditions, a 68% desirability performance was obtained, representing 81% and 66% of SOG and phenol degradability, respectively. Thus, the hydrocarbon oils were readily degradable, while the phenols were more resistant to photocatalytic degradation.

• Korean Journal of Environmental Biology
• /
• v.22 no.4
• /
• pp.524-531
• /
• 2004

Photosynthetic activities and primary production of phytoplankton were investigated in Lake Gocheonam from October 1999 to August 2000. As an estuary lake with a barrage in the Southwestern coast of the Korean peninsula, the lake has received more attention after it became known as the habitat of large population of rare and endangered bird- Baikal Teal. As the lake had high algal biomass ranging from $20\mu{g}\;chl-aL^{-1}\;to\;125\mu{g}\;chl-aL^{-1}$ in average values and rich eutrophication indicator species, the freshwaters were in a very productive or hypertrophic state. In the results obtained from the phytoplankton incubation in the laboratory, the maximum photosynthetic rate $(P_{max})$ varied according to seasons and sampling stations. Photo- synthetic activities were higher during the warm season than the cold seasons and the serial order of $P_{max}$ was August dominated with Microcystis, April with Chlamydomonas and Nitzschia, October with Chlamydomonas and January with Stephanodiscus. The water of the lake was persistently turbid throughout the year due to strong winds from the adjacent sea. Despite the water turbidity, the phytoplankton productions estimated from a mathematical model had very broad range from 18mg C $m^{-2}day^{-1}\;to\;10,300mg\;C\;m^{-2}day^{-1}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.1
• /
• pp.28-31
• /
• 2005

To identify salt-tolerance characteristics of corn seedling was treated in solution of 0, 50 and 100 mM NaCl of hydroponic cultivation. In photosynthesis of corn seedling, there was no large difference between 50mM and 0 mM NaCl solution, however, in 100 mM NaCl solution, the tolerance gradually decreased to $76\%,\;49\%,\;and\;31\%$ after one day, four days, and seven days, respectively, in comparison to 0 mM NaCl solution. Osmotic potential of corn in seedling period was significantly decreased with increasing saline level, however, free proline content in the plant on the ground was significantly increased with increasing saline level and with the lapse of time. In terms of correlation among major characteristics, there was a highly significant positive difference between osmotic pressure potential and photosynthesis, However, highly negative correlation was found between osmotic pressure potential and free proline content. In addition, it was expected that young seedling of corn with saline tolerance may be utilized in the transplantation in salt-accumulated land. Based on above-shown result, in terms of saline tolerance of Chalok-2 variety, growth suppression was serious with 100mM NaCl solution. However, growth was expected that seedling growth would be favorable under 50 mM NaCl solution.

• The Korean Journal of Ecology
• /
• v.11 no.1
• /
• pp.1-15
• /
• 1988

Studies on species compostion, promary production of benthic algal assemblage were carried out along a channel of the salt marsh near Inch'on, Kyonggi Bay, Korea. Possible biological, physical and KDICical factors controlling the aglal assemblage were also examined. The oveall diatoms were encountered one hundred and thirty-seven taxa, of which the dominant species were Paralia sulcata and Cymatosira belgica. These two species accounted for 32.6% relative abundance throughout the study period. Diatom taxa had no clear seasonal pattern in abundance analysis. But at the algal blooming period in spring, euglenoids occurred with a high abundance. The chlorophyll a content of benthic algae showed definite seasonal pattern. The algal biomass of the appeared to influence the spatial fluctuation in the algal biomass of the channel was regulated primarily by water content of sediment. Grazing by zoobenthos apperaed to influence the spatial fluctuation in the algal biomass of the sediment surface. The algal photosynthesis was measured in the laboratory with oxygen method. Photo-synthetic rate was independent of the temperature under the lower irradiance. The gross production from March to November was estimated to be 190g C/m2 at the channel slope. Photosynthetic efficiency was 0.37% on the basis of the photosyntherically active radiation for the study period.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.163-167
• /
• 2021

In the present work, we studied a method for the synthesis of uniform gold-peptide hierarchical superstructures using tyrosine rich peptide, Tyr-Tyr-Leu-Tyr-Tyr (YYLYY). Peptide nanoparticles self-assembled by dityrosine bonds were synthesized through the photo-crosslinking reaction of the peptide, and gold-peptide hybrid nanoparticles were synthesized using biomineralization properties of tyrosine in a green synthetic manner. The synthesized gold-peptide hybrid nanoparticles were then characterized by transmission electron microscopy, scanning electron microscopy, dynamic light scattering, UV-vis spectroscopy, scanning transmission electron microscopy-energy dispersive X-ray spectroscopy, and X-ray diffraction. Furthermore, the catalytic activity of gold-peptide hybrid nanoparticles was confirmed by the reduction reaction of methylene blue where the catalytic reaction rate constant was 13.4 × 10-3 s-1.

• Archives of Metallurgy and Materials
• /
• v.65 no.3
• /
• pp.1111-1116
• /
• 2020

Graphitic carbon nitride (g-C₃N₄) is an attractive photocatalyst, however, its practical photocatalytic applications are still faced with huge challenges. The aim of this research is to identify the correlation between synthetic conditions and properties of the g-C₃N₄ and derive an optimum synthesis condition for improving photocatalytic activities of the g-C₃N₄. In this study, novel and versatile g-C₃N₄ nanosheets were synthesized by the simple thermal pyrolysis of urea. In the synthesis process, the pyrolysis temperature and the heating rate, which can have the most significant influence on the structures and properties of g-C₃N₄, were set as variables, and the effects were systematically investigated. When synthesized at a relatively high temperature, the amount of material being synthesized is reduced, however it has been found to represent optical properties suitable for highly efficient photo-catalyst by the increase in the thickness and defects formed in the g-C₃N₄ nanosheets. The photocatalytic degradation experiment of MB dyes indicated that the highest degradation of 95.2% after the reaction for 120 min was achieved on the g-C₃N₄ nanosheets synthesized at 650℃.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.325-330
• /
• 2004

This study was carried out to determine adequate planting date, to compare the growth characteristics between early and late maturing cultivars, and to provide the data for the cultivation techniques of soybean [Glycine max (L.) Merr.] in double cropping system with winter crops on paddy field in Korea. Cultivars were planted on 26 May, 16 June, and 7 July with a planting density of $70cm(row\;widtb)\;{\times}\;10cm$ (planting spacing). Seed yield of soybean planted on June 16 and July 7 was approximately $37\%\;and\;53\%$, respectively, less than that of conventional planting date of May 26 in Pungsan-namulkong, and planted on June 16 and July 7 was about $30\%\;and\;37\%$, respectively, less then that of conventional planting date of May 26 in Hanamkong. The number of pods and seeds per plant decreased as planting date delayed. Seed weight increased in Pungsan-namulkong but decreased in Hannamkong as planting date delayed. The flowering date was late in delayed planting plots, but it was shorted for days from emergence to flowering and from emergence to maturity. The plant height of Hannamkong was greater than Pungsan-namulkong from the emergence to flowering stages, but in contrast, it was greater in Pungsan-namulkong than Hannamkong after flowering stage (50d after emergence) when it planted on May 26. There were no significant differences between two soybean cultivars at planting dates of June 16 and July 7. Leaf number, leaf area, and dry matter were also reduced by late planting, and Both of them were shown in high reduction at the later planting. There was a high significant difference at the flowering $(r\;=\;0.87^{**})$ and pod formation $(r\;=\;0.91^{**})$ stages between leaf dry matter and seed yield. Crop growth rate (CGR) was greater at $R2\~R3$ growth stages compared to $R3\~R4\;or\;R4\~R5$ growth stages in two soybean cultivars and the greatest CGR was obtained at planting date of May 26 in two soybean cultivars except for R4-R5 growth stage in Pungsan-namulkong. There was a highly significant positive difference between the seed yield and the leaf area index (LAI) across R3 to R4 and R2 to R3 stages. The photosynthetic rate $(P_N)$ of the uppermost leaf position had no significant difference among planting dates and between two soybean cultivars. However, $P_N$ of the $7^{th}$ leaf position increased as the planting date delayed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.133-141
• /
• 1995

The effects of allelochemicals from medicinal plants have been studied as photo-synthetic inhibitor for photoautotrophic(PA) cultured cells. The extracts from 9 plant species were used for measuring the physiological effects on the liverwort cultured cell in following areas; germination inhibition, chlorophyll contents, hill activity, cell viability, photosynthetic oxygen evolution,and protein pattern changes on SDS PAGE. Germination inhibitions were detected in all plant after treating with 10% extract. Especially, treatment with 10% extract from Pulsatilla koreana and Aconitum carmichael inhibited germinations completely. Chlorophyll fornation was inhibited completely by treating PA cells with extract of Pulsatilla koreana, whose effect was similar to that of DCMU 10-3M, inhibitor for photosynthetic electron trans-fer. The treatment with extract from Pulsatilla koreana on PA cell showed the highest hill activity and the lowest cell viability among extracts studied. Oxygen releasing has been decreased down to 14-77% after treating with extracts from Pinellia ternata, Araliacont inentaila, Pulsatilla koreana and Vitex rotundifolia. Especially, 60$\mu$l of Pulsatilla koreana extract into 2ml mixture of PA cell inhibit-ed oxygen release up to 50%. Protein bands on SDS-PAGE, 14kD, 31kD, 41kD, 53kD, and 73kD, were not detected after treating Pulsatilla koreana extract on PA cells.