• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.190-191
• /
• 2008

In the presence of heat and oxygen, phosphorous compounds decompose to form water vapor and phosphorous oxides. The phosphorous oxides subsequently reat with the polymer matrix and dehydrate it, reforming phosphoric acids. These acids again decompose to reform water vapor and phosphorous oxides. Ultimately as the water available from normal combustion of hydrocarbons diminishes, the phosphorous oxide reat with hydrocarbon fragments to produce a very high melting point char at the interface between the polymer and the heat material. The chars, which contain phosphorous, rapidly dissipate heat energy and lose their glow. This antiglow property of phosphorous compound contributes to its availability as a flame retardant. In this study, the acrylated phosphorous compounds will be prepared and demonstrated as flame retardants.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.133-138
• /
• 1997

The technology of removing phosphorous, considered as one of the most important control nutrients causing eutrophication in various water bodies, have been investigated by many researchers. Recently, phosphorous crystallization process is emerging as a new technology for phosphorous removal. In this study, waste oyster shells which can be easily obtained from the ocean, were used as a seed crystal, and their effects of several physical/chemical factors on the phosphorous removal efficiencies were examined by batch tests. Ca$^{2+}$ and pH affected phosphorous crystallization process using waste oyster shells. As alkalinity of wastewater increased, phosphorous removal efficiencies gradually decreased. Phosphorous removal efficiencies were increased, as specific area and contact efficiency per unit area of waste oyster shells were increased. In case of high temperature, phosphorous crystallization process was rapidly advanced and phosphorous removal efficiencies were increased. Dependig on X-ray diffraction analysis, it was showed that generation materials extracted from the surface of waste oyster shells with short reaction time were dominated by $CaHPO_4\cdot 2H_2O$, but progressed to $Ca_5(OH)(PO_4)_3$. The SEM observation reveals that the evident variations were hardly seen, but particle sizes of waste oyster shells were relatively bigger and showed forms of smaller plate than before.

• Journal of Nutrition and Health
• /
• v.26 no.8
• /
• pp.974-981
• /
• 1993

The longitudinal changes on contents of calcium, phosphorous and magnesium of breast milk of 23 Korean lacto-ovo-vegetarians(primiparae=11, multiparae=12) at 0.5, 1, 2 and 3 months postpartum have been studied. The mean ash content of breast milk per 100ml was 0.21g in total lactating women(n=23), and it decreased significantly during lactation(p<0.05). The mean calcium, phosphorous and magnesium contents of breast milk per 100ml were 26.83mg, 14.01mg and 2.72mg, respectively. Body calcium and phosphorous contents decreased significantly during lactation(p<0.05), but magnesium content tended to increase during lactation. There were no significant differences in ash, calcium, phosphorous and magnesium contents between primiparae and multiparae. The ratio of calcium to phosphorus was about 1.95:1 in breast milk and 0.62 : 1 in maternal dietary intake. In calcium and phosphorous, no correlation was found between maternal dietary intake and the concentration in breast milk. This study suggests that the contents of calcium, phosphorous and magnesium in lacto-ovo-vegetarian breast milk are not different from the concentrations of those in non-vegetarian.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.76-81
• /
• 1998

The technology of removing phosphorous, considered as one of the most important control nutrients causing eutrophication in various water bodies, have been investigated by many researchers. In this study, casts which can be obtained from the vermicomposting of mixing sewage sludge and cow manure, were used as an adsorbent, and their effects of several physical/chemical factors on the efficiencies of phosphorous adsorption were examined by batch tests. Generally, it could be showed that the efficiencies of phosphorous adsorption were very influenced by cast dosage, temperature and agitation speed. If we reflected the adsorption capacity(k) and adsorption intensity(1/n) of Freundlich isotherm, we couldn't consider casts as a good adsorbent for removing phosphorous. But, because casts were relatively excellent in cation exchange, in point of waste recycling, we could know that they were capable of removing phosphorous. The SEM observation revealed that the evident variations were hardly seen, but particle sizes of cast were relatively bigger and showed forms of smaller plate than before.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.49-55
• /
• 2003

Total phosphorous removal rate was examined of a subsurface-flow treatment wetland system which was constructed on floodplain in the down reach of the Kwangju Stream in Korea from May to June 2001. Its dimensions were 29 meter in length, 9 meter in width and 0.65 meter in depth. A bottom layer of 45 cm in depth was filled with crushed granite with about 15~30 mm in diameter and a middle layer of 10 cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds(Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream flowed from a submerged dam into it via a pipe by gravity flow and treated effluent was funneled back into the Stream. The number of reed stems increased from 80 stems/$m^2$ in July 2001 to 136 stems/$m^2$ in September 2001. The hight of stems was 44.2 cm in July 2001 and 75.3 cm in September 2001. The establishment of reeds at early operating stage of the system was good. Volume and water quality of inflow and outflow were investigated from July 2001 through December 2001. The average inflow was 40 $m^3$/day and hydraulic detention time was about 1.5 days. The concentration of total phosphorous n influent and effluent was 0.83 and 0.33 mg/L, respectively. The removal rate of total phosphorous averaged about 60%. The removal efficiency was slightly higher, compared with that of subsurface-flow wetlands operating in North America, whose retention rate of total phosphorous was reported to be about 56%. The good abatement rate could be attributed to sedimentation of particle phosphorous in pores of the media and adsorption of phosphorous to the biofilm developed on the surface of them. Increase of standing density of reeds within a few years will develop root zones which may lead to increment in the phosphorous retention rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.195-202
• /
• 1998

The LPCVD system of batch type for the massproduction of semiconductor fabrication has a problem of phosphorous concentration uniformity in the boat. In this paper we study an improvement of the uniformity for phosphorous concentration and sheet resistance. These property was improved by using the nitrogen process and modified long nozzle for gas injection tube in the doped polysilicon deposition system. The phosphorous concentration and its uniformity for polysilicon film are measured by XRF(X-ray Fluorescence) for the conventional process condition and nitrogen process. In conventional process condition, the phosphorous concentration, it uniformity and sheet resistance for polysilicon film are in the range of 3.8~5.4$\times$10\ulcorner atoms/㎤, 17.3% and 59~$\Omega$/ , respectively. For the case of nitrogen process the corresponding measurements exhibited between 4.3~5.3$\times$10\ulcorner atoms/㎤, 10.6% and 58~81$\Omega$/ . We find that in the nitrogen process the uniformity of phosphorous concentration improved compared with conventional process condition, however, the sheet resistance in the up zone of the boat increased about 12 $\Omega$/ . In modified long nozzle, the phosphorous concentration, its uniformity and sheet resistance for polysilicon films are in the range of 4.5~5.1$\times$10\ulcorner atoms/㎤, 5.3% and 60~65$\Omega$/ respectively. Annealing after $N_2$process gives the increment of grain size and the decrement of roughness. Modification of nozzle gives the increment of injection amount of PH$_3$. Both of these suggestion result in the stable phosphorous concentration and sheet resistance. The results obtained in this study are also applicable to process control of batch type system for memory device fabrication.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.6
• /
• pp.30-36
• /
• 2002

A 0.19 hectare natural-type wetland for stream water treatment demonstration was constructed and planted with cattails from April 2001 to May 2001. Part of its bottom surfaces adjacent to levees have a variety of slope of 1 : 4~1 : 15. Two small open water areas were installed, in which emergent plants could not grow. Removal of nutrients from stream waters was a major objective of the wetland. Waters of Sinyang Stream flowing into Kohung Estuarine Lake were pumped and funneled into the wetland. The lake had been formed by a salt marsh reclamation project and was located southern coastal region of Korean Peninsula. Volumes and water quality of inflow and outflow were analyzed from July 2001 through December 2001. Inflow and outflow averaged $120.4m^3/day$ and $112.1m^3/day$, respectively. Hydraulic retention time was about 3.1 days. Average total phosphorous concentration of influent and effluent was $0.19mg/{\ell}$ and $0.075mg/{\ell}$, respectively. Total phosphorous loading rate of inflow and outflow averaged $12.05mg\;m^{-2}\;day^{-1}$ and $4.44mg\;m^{-2}\;day^{-1}$, respectively. Average total phosphorous removal rate in the wetland was $7.61mg\;m^{-2}\;day^{-1}$. Seasonal changes of phosphorous retention rates were observed. The wetland acted as effective phosphorous sinks in the initial stage of the constructed wetland.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.97-102
• /
• 2007

The present investigation deals to achieve an accurate determination of the phosphorous present in the wastewater samples using the membrane reactor. The study may enable to quantify the dissolved (DP) and adsorbed phosphorous (AP), also the adsorbed phosphorous categorically identified as inorganic coupled phosphorous (DRP) and organic coupled phosphorous (NRP). Moreover, the study has been conducted separately in anaerobic and aerobic chamber. The results obtained showed that dissolved phosphorous only can occur in anaerobic chamber with ca. 25%. The study conducted for adsorbed phosphorous showed that the DRP has the percent composition in anaerobic and aerobic chamber respectively 33% and 40% i.e., 7% more in aerobic chamber. The similar values obtained for NRP was found to be 42% and 60% i.e., 18% more in aerobic chamber. On the other hand while comparing the results for NRP and DRP, it has to be noted that NRP has 9% and 20% more percent composition than DRP respectively in anaerobic and aerobic chamber. Further, the adsorbed phase showed the species Al-P, Fe-P in the aerobic chamber with the quotient of 7.73 mg/g TS (total solid) whereas in the anaerobic chamber it showed the species Fe-P and $Fe(OH)_3$-P with the 7.16 mg/g TS.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.251-254
• /
• 2003

Phosphorous removal rate and emergent plant growth were examined of a surface-flow constructed treatment wetland system, whose dimensions were 31 meter in length and 12 meter in width. The system was established on floodplain in the down reach of the Kwangju Stream in Korea in one and half months from May to June 2001. Cattails(Typha angustiflora) were transplanted in the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream were funneled into it via a pipe by gravity flow and its effluent were discharged back into it. The stems of cattails grew from 45.2 cm in July 2001 up to 186 cm in September 2001 and the number of cattail stems per square meter increased from 22 in July 2001 to 53 in September 2001. The early establishment of cattails was good. Volume and water quality of inflow and outflow were analyzed from July 2001 through December 2001. Inflow averaged $40\;m^3/day$ and hydraulic retention time was about 1.5 days. The concentration of total phosphorous in influent and effluent was 0.85 mg/L, 0.41 mg/L, respectively. The average removal rate of total phosphorous in the system was about 52%. The retention efficiency was slightly lower, compared with that in surface-flow wetlands operating in North America, whose retention efficiency was reported to be about 57%. The lower abatement rate could result from the initial stage of the system and inclusion of two cold months into the six-month monitoring period. Root rhizosphere in wetland soils and litter-soil layers on bottoms were not properly developed. Increase of standing density of cattails within a few years will establish both root zones and substrates beneficial to the removal of phosphorous, which may lead to increase of the phosphorous retention rate. The system was submerged one time by heavy storm during the monitoring period. The inundation, however, scarcely disturb its environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.111-113
• /
• 2009

This paper shows that you can achieve high quality N+ emitter layers using a screen printable phosphorous diffusion paste and firing in an infrared belt furnace. Spreading resistance measurement from a beveled sample is used to measure carrier concentration as a function of depth for different phosphorous concentrations. Contours of estimated sheet resistance are shown for different processing conditions. This paper describes newly developed low cost phosphorous pastes. It shows the characterization of the newly developed phosphorous paste (DP99-038). This low cost pastes can easily be printed and make 16% efficiency.