• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.121-139
• /
• 2008

For mechanical drive steam turbines, the investigation results of corrosion fatigue phenomena in the transient zone are introduced, including basic phenomena on expansion line and actual design and damage experience. These results were analyzed from the standpoint of stress intensity during the start of cracking. In order to resolve such problems, preventive coating and blade design methods against fouling and corrosive environments are developed. Detailed evaluation test results are given for coating performance using a unique test procedure simulating fouling phenomena and washing conditions. Finally, the results of the successful modification of internals and on-line washing results on site are introduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.109.5-109
• /
• 2001

The separation of scintillation phenomena concurrent with rain attenuation phenomena can be accomplished by filtering. Based on the analysis of satellite signal fading during rain, scintillation and rain attenuation phenomena are examined and extracting from raw data by using adaptive IIR high-pass filter and adaptive IIR low-pass filter. Adaptive IIR filter are designed by using the algorithm of Least Mean p-Power (LMP) Error Criterion which have been modified by Quantizing Gradient technique. This algorithm reduces amount of multiplication computational equal to the length of input data. It is prove here that the convergence speed, variance, bias independence on p values. For this application, p=1 is chosen. The procedure of application ...

• 한국주조공학회지
• /
• 제7권3호
• /
• pp.184-191
• /
• 1987

In this study the principles of melting phenomena of compacted vermicular graphite cast iron are discussed by considering the effects of the variation of phosphorus content and heating rate on the quenched microstructure of the specimens. In compacted vermicular graphite cast iron containing little phosphorus, the melting phenomena are found initially at the outer region of austenite shell and subsequently progressed with the diffusion of carbon through the austenite shell without regard to heating rate. But as the phosphorus content was increased over than 0.12wt.%, the melting phenomena initiated at the boundary of eutectic shell and progressed along the contact area between the melt and graphite tips at higher heating rate. At lower heating rate, the melt of steadite dissolved at the lower temperature than that of eutectic was moved toward the graphite through the austenite grain-boundary and promoted melting of graphite and matrix.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.847-854
• /
• 2012

Despite extensive research efforts, the mechanism of the nucleate boiling phenomena is still not clear. A direct numerical simulation of the boiling phenomena is one of the promising approaches in order to clarify its heat transfer characteristics and discuss their mechanism. Therefore, many DNS procedures have been developed based on recent highly advancing computer technologies. This brief review focuses on the state of the art in direct numerical simulation of the pool boiling phenomena over the past two decades. In this review, the fundamentals of the boiling phenomena and the bubble departure and micro-layer models are briefly introduced, and then the numerical procedures for tracking or capturing interface/surface shape such as the front tracking method, level set method, volume of fluid treatments, and other methods (Lattice Boltzmann method, phase-field method and so on) are briefly reviewed.

• 에너지공학
• /
• 제7권1호
• /
• pp.122-130
• /
• 1998

A simplified heat transfer model for the cooling capability of the AP 600 PCCS is proposed I this paper. As the PCCS domain is covered with very thin and long water film, it is phenomenologically divided into 3 regions; water entrance effect region, asymptotic region, and air entrance effect region. As the length of the asymptotic region is estimated to be over 90% of the whole domain, the phenomena in the asymptotic region is focused. Using the analogy between heat and mass transfer phenomena in a turbulent situation, a new dependent variable combining temperature and vapor mass fraction was defined. The similarity between the PCCs phenomena in the asymptotic region and the buoyant air flow phenomena on a vertical heated plate is derived. Using the similarity, the simplified heat transfer correlations for the interfacial heat fluxes and the ratios of latent heat transfer to sensible heat transfer were established. To verify the accuracy of the correlation, the results of this study were compared with those of other numerical analyses performed for the same configuration and they are well within the range of 15% difference.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.36-41
• /
• 2002

The cause and the elimination method for the chattering phenomena were investigated in a check valve attached to the exit of an auxiliary cooling water pump in a Korean nuclear powerplant. From the site experiment and the numerical calculation, the incident angle of the disk was so small that it was not able to produce the sufficient lifting force to overcome the gravitational component of the disk weight. Moreover, it turned out that the installation position was not symmetric for the secondary vortical flow generated inside the elbow so that the flow structure had strongly unstable flow characteristics. From this study, the tapping noise and the chattering phenomena were eliminated exactly by changing the incidence angle of the valve disk and the installation position of the calve body.

• 복식문화연구
• /
• 제9권6호
• /
• pp.881-892
• /
• 2001

Applying the globalization theory to the fashion phenomena which regarded the phenomena of the contemporary culture as globalization, this study had an object of looking into the globalization tendency of the fashion phenomena shown Paris, London, Milno, New York, Tokyo, and Seoul collections from 1995 to 1999. The results of this study were as follows; 1. It was the blend of romanticism that was the most common trend shown at the six world collections. 2. The works appeared at the six world collections showed the regional peculiarity under the historical background or the sociocultural influence each city had. 3. Another character appeared at the six city collections was the appearance of multi-ethnic style mixed various regional motive at a work. After all, the world fashion phenomena in the second half of 1990's could be condensed into globalization appeared homogenization, regionalization and hybridization at the same time.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권4호
• /
• pp.28-35
• /
• 2004

Stimulated by novel phenomena observed in molecular aggregates, recent developments in engineering fields of microscopic scales are creating tremendous opportunities for future nanotechnology-based applications. Investigation in the field involves sub-nanosecond or sub-micrometer interactions between extremely small systems, but researches, to date in these physical extremes have been quite limited. Here, we shed light on some of nanoscale phenomena using molecular dynamics simulation: visualization of various phenomena of nanoscales and exploration of size-dependent mechanical properties.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.10-15
• /
• 2008

Flocculation phenomena of the stock mixed with cellulosic fibers, fillers and polymers were investigated by a new turbidity measurement system consisted of a probe-type turbidimeter, data acquisition system and computer. The probe-type turbidimeter allowed to measure the real time flocculation of the stock induced by single polymer and microparticle systems. Flocculation phenomena were evaluated by average and final relative turbidity indices. Turbidity and flocculation showed inverse relationship, i.e. the turbidity decreased with the formation of flocs. Relative turbidity of the stock treated with microparticle system was lower than that of the stock containing single polymer system, which indicated that the microparticle system showed greater floc forming efficiency than single polymer system.

• 전기의세계
• /
• 제26권2호
• /
• pp.57-65
• /
• 1977

In roder to investigate the influence of treeing on electric breakdown of solid organic insulator the initiation and growing mechanism of tree itself, and the correlation between corona discharge and treeing phenomena in solid orgainc insulating materials, several experiments were carried out by means of needle test on polymethyl-methacrylate. The obtained results showed that the existence of voids in specimen had important effects on initiation voltage of trees and, when the direct voltage was applied, the initiation voltage of trees increased by space charge effect. And also the stagnation phenomena due to the transfer of vacancy cluster or polymekr cage in specimen might beconsidered in process of growth of trees, and corona discharge seemed to be the pre-phenomena of treeing because trees were normally initiated by internal discharge in voids.