• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.50-55
• /
• 2005

In previous report, we investigated the impact of hexeneuronic acid and some residual extractiveson lignin determination. These non-lignin components severely interfered lignin content determination which also affect on the oxygen delignification comparison between aspen and pine unbleached kraft pulps. Very different pattern was observed whether based on uncorrected conventional kappa number or based on corrected kappa number in oxygen delignification comparison. Lower kappa number aspen pulps showed poor response to oxygen delignification when kappa number was used as lignin determination method but better response with using the acid lignin method. Phenolic hydroxyl group in kraft pulps were also compared based on uncorrected or corrected kappa numberfor lignin content. Based on uncorrected kappa number, lower kappa number oxygen-delignified pulps had lower phenolic hydroxyl group. However, lower kappa number oxygen-delignified pulps showed much higher phenolic hydroxyl group based on the corrected lignin content. For accurate comparison for residual lignin properties from different pulps, lignin determination should be corrected from non-lignin components contribution to lignin.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.54-60
• /
• 1994

The pine bark from mechanical pulp industry was cooked with bisulfite liquor, and the chemical and physical properties of the spent liquor after cooking for 90 minutes, which allowed partial defibration were determined. Lignosulfonate or lignin-related materials in the spent liquor have a molecular weight of approximately 3,000, which is lower than that of commercial lignosulfonate (C-LS) prepared from wood. The sulfonic equivalent weight calculated by colloid titration was 307 for C-LS, 238~239 for spent liquor. The contents of lignosulfonic acid and phenolic hydroxyl groups on $C_9$ unit of lignin in the spent liquor were 0.98~0.99, and 1.51~1.66, respectively. These values were remarkably higher than those of C-LS. Especially the content of phenolic hydroxyl group was almost twice that of C-LS. The viscosity of spent liquor after freeze drying was very low compared to C-LS. The dispersing ability of spent liquor was almost equivalent to or more than that of C-LS.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.251-259
• /
• 1987

Humic acids extracted from decomposing plant residues were characterized by infrared(IR) spectra. The IR spectra were further interpreted by chemical analyses for oxygen-containing functional groups such as carboxyl, phenolic, alcoholic, carbonyl, and quinionic groups. 1. The IR spectra obtained in this study were divied into three categories: spectra of humic acids from grain crop straws of rice, barley, wheat and rye produced Type I, while that from wild grass hay yielded Type II, and those from forest tree litter of the deciduous and conifers were led to give Type III. 2. There were no significant changes in the absorption bands observed among humic acids extracted at various stages of decomposition of a given Plant material. 3. The absorption band at about $3,430cm^{-1}$ represents the presence of hydrogen-bonded hydroxyl groups, phenolic-OH groups being the major component. 4. A close relationship was found between the total acidity and the content of phenolic-OH groups of humic acids. The content of carboxyl groups maintains a direct relationship with the content of total hydroxyl groups, and such a close relationship also exists between the content of alcoholic hydroxyls and that of total hydroxyl groups. 5. Overlapping of the absorption bands of carbonyl groups and quinones renders it difficult to make differentiation between the two. 6. A variety of non-armoatic cyclic hydrocarbons appears to be a structural component as evidenced by a sharp absorption peak near $995-1000cm^{-1}$.

• Preventive Nutrition and Food Science
• /
• v.3 no.2
• /
• pp.123-127
• /
• 1998

Fixed-bed adsorption was adapted to separate phenolic acids from diluted phenolic solution. Break-through curve was obtained by nonlinear curve fitting method, and breakpoint, saturation time, and mass transfer coeffi-cient were calculated . Break point and saturation time were reached slower with $\rho$-coumaric acid than ferulic acid .The p-coumaric acid, having small molecular weight, is suposedly traveled longer pathway in characoal than ferulic acid. Fixed-bed adsorption iwht gallic acid having more hydroxyl functional group than other phenolic acids showed break point arrival and the largest saturation time. This fact means that there was bigger electrostatic affinity between gallic acid and charcoal than between other phenolic acids and charcoal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.38-49
• /
• 1985

The water soluble organic fractions (WSOF) from an agricultural soil (W), a soil treated with sludge for 6 years ($WS_6$), a sludge-soil mixture incubated for one week ($WS_1$), and sewage sludge (SS) were extracted, purified, and characterized by elemental analysis, functional group determinations, infrared, UV-visible, and proton nuclear magnetic resonance spectrosocpy. The SS was characterized by higher organic H, N, and P contents, a higher H/C ratio, and a lower C/N ratio than W. Total acidity carboxyl and phenolic hydroxyl group contents were generally highest in SS, intermediate in $WS_6$ and $WS_1$, and lowest in W. Overall aromatic character and aromatic carboxyl group contents were highest in W, and lowest in SS. Aliphatic proton, aliphatic carboxyl, and phenolic hydroxyl group contents were highest in SS, and lowest in W. Protein decomposition products were the pronounced components in SS, and decreased in concentration as the sludge component in the mixtures decreased. The $^1H$-NMR spectra suggested that the SS-protons were bound to a wider range of functional groups than W-protons. Structural complexities around the aromatic protons followed the following order: SS>$WS_1$>$WS_6$>W.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.3
• /
• pp.539-542
• /
• 2007

Glycosyltransferase family 1 (UOT) uses small chemicals including phenolics, antibiotics, and alkaloids as substrates to have an influence in biological activities. A glycosyltransferase (XcGT-2) from Xanthomonas campestris was cloned and consisted of a 1,257 bp open reading frame encoding a 45.5 kDa protein. In order to use this for the modification of phenolic compounds, XcGT-2 was expressed in Escherichia coli as a glutathione S-transferase fusion protein. With the E. coli transformant expressing XcGT-2, biotransformation of flavonoids was carried out. Flavonoids having a double bond between carbons 2 and 3, and hydroxyl groups at both C-3' and C-4', were glycosylated and the glycosylation position was determined to be at the hydroxyl group of C-3', using nuclear magnetic resonance spectroscopy. These results showed that XcGT-2 regiospecifically transferred a glucose molecule to the 3'-hydroxyl group of flavonoids containing both 3' and 4'-hydroxyl groups.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.1
• /
• pp.44-52
• /
• 1996

Humic substances of 17 organic fertilizers available on the market were the objects of study. The list of ingredients for formulation of them comprised fish meal. bone meal, oil-cakes, brewer's grains, peat, sawdust, wood bark, zeolite, soil conditioner, live-stock droppings, amino acid fermentation byproduct, chaff, limestone and others. Humic and fulvic acids were isolated from those substances and given chemical and spectroscopic analyses. Nutritional values of the organic fertilizers showed big diversity. Humification of organic matter was incomplete for some of the fertilizers as indicated by a high C/N ratio. Extractable humic acid percentage was higher, in general, than that of fulvic acid. Also the relative content of humin increased with advanced humification. Total acidity was closely related to phenolic hydroxyl groups. Relationships between carboxyl and hydroxyl groups. and carboxyl and alcoholic hydroxyl groups were very significant. Ultraviolet and visible light absorption spectra of humic and fulvic acids were substantially similar. The types of humic acids were B. P, and Rp. Two humic acids of the 17 samples belonged to B type. 3 to P type and all the rest to Rp type.

• Archives of Pharmacal Research
• /
• v.14 no.1
• /
• pp.41-43
• /
• 1991

For the purpose of survey of the antibacterial activity against a cariogenic bacterium Streptococcus mutans OMZ 176 with the introduction of hydroxyl and allyl groups to o-phenylphenol (Fig. 2, 1), 4-hydroxy-o-phenylphenol (2), and 3,6-diallyl-4-hydroxy-o-phenylphenol (4) were synthesized, sucessively. The synthesized compounds, 2 and 4 showed more potent antibacterial activity than the starting material, 1. The hydroxyl group was supposed to the essential element for the antibacterial activity and the introduction of allyl group to phenolic ring to be another element to increase the activity.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.472-477
• /
• 2016

We studied the effects of anodic oxidation treatments of carbon fibers on interfacial adhesion of the carbon fibers-reinforced epoxy matrix composites with various current densities. The surface of treated carbon fibers was characterized by atomic force microscope (AFM), field emission-scanning electron microscope (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The interlaminar shear strength (ILSS) of the composites was determined by a short beam shear test. This result showed that both the roughness and oxygen group of the carbon fibers surface increased in proportion to the current density. After anodic-oxidation-treated, the ILSS also increased as a function of the current density. In addition, the proportional relationship between ILSS and phenolic hydroxyl group was confirmed. The ILSS of the CF-2.0 sample increased by 4% compared to that of the CF-AS sample, because the anodic oxidation treatment increased the oxygen group and roughness on the carbon fibers surface, which leading to the improvement of the interfacial adhesion of the carbon fibers-reinforced epoxy matrix composites. Among these, the phenolic hydroxyl group which has the proportional relationship with ILSS is found to be the most important factor for improving the interfacial adhesion of the carbon fibers-reinforced epoxy matrix composites.