• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.515-528
• /
• 1995

The human genomic deoxyribonucleic acid(DNA) was extracted from the pulp, dentin of 22 teeth by clelex, phenol methods. Samples of the tooth-derived DNA were amplified by polymerase chain reaction(PCR), electrophosed for sex determination by detection of X-Y homologus amelogenin gene and D1S80 locus detection The following results have been achieved. 1. Chelex and phenol method are effective to sex determination in the pulp and dentin 2. Chelex method is not suitable for detection of D1S80 locus. 3. Concentration and purity of DNA for teeth using chelex method is lower than using phenol method. From the above investigation, chelex method is simple, rapid for sex determination, but it is not suitable for detection of VNTRs.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.497-513
• /
• 1995

Human genomic Deoxyribonucleic acid(DNA) was extracted from teeth by boiling, salting-out, phenol, boiling-phenol methods. The author compared DNA concentration and its purity, the accuracy of sex determination and the results of the D1S80 locus detection among above 4 methods. The following results were obtained : 1. DNA concentration was the highest in pulp with salting-out method and DNA purity was higher in pulp with salting-out and phenol methods than other 2 methods. 2. Sex determination was possible using of the pulp and the dentin of the teeth with four methods but, it was impossible in the enamel and some pulp with boiling method. 3. Amplification of D1S80 locus occurred from pulp and dentin with salting-out, phenol, and boiling-phenol methods. 4. There are no differences among the amplification of X-Y homologus amelogenin gene by application of 4 methods and salting-out, phenol methods efficiently makes available to amplification of D1S80 locus. From the investigation DNA extraction, sex determination, amplification of D1S80 locus was successfully accomplished with salting-out, phenol, boiling-phenol methods Therefore above 3 methods are available and applicable as forensic odontology for individual identification.

• Nano
• /
• v.13 no.11
• /
• pp.1850134.1-1850134.10
• /
• 2018

Increasing active sites and enhancing electric conductivity are critical factors to improve sensing performance toward phenol. Herein, Ni nanoparticle was successfully anchored on acidified multiwalled carbon nanotube (a-MWCNT) surface by electroless plating technique to avoid Ni nanoparticle agglomeration and guarantee high conductivity. The crystal structure, phase composition and surface morphology were characterized by XRD, SEM and TEM measurement. The as-prepared Ni/a-MWCNT nanohybrid was immobilized onto glassy carbon electrode (GCE) surface for constructing phenol sensor. The phenol sensing performance indicated that Ni/a-MWCNT/GCE exhibited an amazing detection performance with rapid response time of 4 s, a relatively wide detection range from 0.01 mM to 0.48 mM, a detection limit of $7.07{\mu}M$ and high sensitivity of $566.2{\mu}A\;mM^{-1}\;cm^{-2}$. The superior selectivity, reproducibility, stability and applicability in real sample of Ni/a-MWCNT/GCE endowed it with potential application in discharged wastewater.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.416-422
• /
• 2001

The migration of alkylphenols from PVC packaging materials (wrap, sheet and gasket) into food simulants and foods were analyzed by reversed-phase high-performance liquid chromatography with fluorescence detection and gas chromatography with mass selective detection. Only seven nonyl phenol isomers were detected in three types of PVC food packaging materials and the content of nonyl phenol of wrap was higher than those of sheet and gasket. The contents of nonyl phenol migrated from fatty food simulants (n-heptane) were higher than those from aqeous food simulants (distilled water, 4% acetic acid and 20% ethanol) and increased with increase in temperature. Nonyl phenol in fruit juice, infant formula, and beverage was migrated from PVC gasket, olefin gasket, and olefin bottle cap, respectively. Nonyl phenol was also detected from foods even before contacting with the packaging materals.

• Research in Plant Disease
• /
• v.10 no.1
• /
• pp.53-57
• /
• 2004

Cucumber green mottle mosaic virus (CGMMV) was a major pathogen of watermelon and had affected seriously to watermelon production in Korea. Rapid and sensitive detection method of CGMMV associated with bottle gourd (Lagenafia siceraria) seeds was developed by using RT-PCR in this study. A pair of primeri Wmfl and Wmrl, specific for CGMMV was designed from coat protein gene sequences of CGMMV-W and used for amplifying 420 bp product in RT-PCR. To simplify the virus extraction procedure and reduce an inhibitor from the extract for the RT-PCR, some methods using ethanol precipitation, double filtration, polyethylene glycol precipitation and phenol/chloroform/isoamyl alcohol extraction procedure were compared and the phenol/chloroform/isoamyl alcohol extraction procedure was selected by its enhanced sensitivity. This detection method using the selected extraction step and the primers for RT-PCR could reliably detect an infected level of one CGMMV-infested seed in 1,000 seeds. This rapid and sensitive RT-PCR assay provides auseful tool for the specific detection of CGMMV in bottle gourd seed samples containing high levels of back-ground inhibitors.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.342-347
• /
• 1996

Voltammetric determination of phenol derivatives, such as phenol, o-, m-, and p-cresols was studied with a β-Cyclodextrin (β-CD) modified-carbon paste electrode composing of the graphite powder and Nujol oil. Phenol derivatives were chemically deposited via the complex formation with β-CD by immersing the CME into a sample solution. The resulting surfaces were characterized with cyclic and differential pulse voltammetry. Treating the CME with 1 M nitric acid for five sec after a measurement could regenerate the electrode surface. Linear sweep and differential pulse voltammograms were recorded for the above system to optimize the experimental parameters for analysing the phenol derivatives. In this case, the detection limit for phenols was 5.0×10-7M for 25 min of the deposition time with differential pulse voltammetry. The relative standard deviation was ±5.2% of 3.0×10-6M (four repetitions). The interference effect of the following organic compounds was also investigated; Bezoic acid, hippuric acid, o-, m-, and p-methylhippuric acid. Adding the organic compounds into the sample solution reduces the peak current of the phenols to about 25%.

• Advances in environmental research
• /
• v.4 no.1
• /
• pp.39-48
• /
• 2015

Bisphenol A is widely used in plastic and other industrial consumer products. Release of bisphenol A and its analogues into the aquatic environment during manufacture, use and disposal has been a great scientific and public concern due to their toxicity and endocrine disrupting effects on aquatic wildlife and even human beings. More recent studies have shown that these alkylphenols may affect the molting processes and survival of crustacean species such as American lobster, crab and shrimp. In this study, we have developed gas chromatography with flame ionization detection (GC-FID) and gas chromatography-mass spectrometric (GC-MS) methods for the determination of bisphenol A and its analogues in shrimp Macrobrachium rosenbergii, blue crab Callinectes sapidus and American lobster Homarus americanus samples. Bisphenol A, 2,4-bis-(dimethylbenzyl)phenol and 4-cumylphenol were found in shrimp in the concentration ranges of 0.67-5.51, 0.36-1.61, and < LOD (the limit of detection)-1.96 ng/g (wet weight), and in crab of 0.10-0.44, 0.13-0.62, and 0.26-0.58 ng/g (wet weight), respectively. In lobster tissue samples, bisphenol A, 2-t-butyl-4-(dimethylbenzyl)phenol, 2,6-bis-(t-butyl)-4-(dimethylbenzyl)phenol, 2,4-bis-(dimethybenzyl)phenol, 2,4-bis-(dimethylbenzyl)-6-t-butylphenol and 4-cumylphenol were determined at the concentration ranges of 4.48-7.01, 1.23-2.63, 2.71-9.10, 0.35-0.91, 0.64-3.25, and 0.44-1.00 ng/g (wet weight), respectively. At these concentration levels, BPA and its analogs may interfere the reproduction and development of crustaceans, such as larval survival, molting, metamorphosis and shell hardening.

• Journal of Microbiology
• /
• v.35 no.4
• /
• pp.354-359
• /
• 1997

Methods for the extraction of DNA from water sample were approximated. Four different procedures of DNA extraction were carried out with pellets obtained from centrifugation of 4 liter water samples. The recovery efficiency and purity of DNA extracted by each method from different sources were compared. DNA yield varied with extraction methods, Method I, which involves enzymatic and freeze-thaw lysis steps and phenol and phenol-chloroform purification of extracted nucleic acid, showed a significantly higher yield and purity than the other methods. The use of glass beads in the DNA extraction methods improved the purity of DNA suitable for PCR. Bovine serum albumin in the PCR reaction mixture was useful in reducing inhibitory effects of contaminants. The efficiency of an extraction method was determined by the detection of the aer of Aeromonas hydrophila with PCR. The lower limit of detection of A. hydrophila from seeded tap water was 2 CFU/ml in PCR when method I was used for DNA preparation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.2
• /
• pp.127-137
• /
• 2002

Phenolic compounds in air are toxic even at their low concentrations. We had evaluated a total of five phenolic compounds (Phenol, o-Cresol, m-Cresol, 2-Nitrophenol and 4-Chloro-3-methylphenol) in artificial air using a combination of ATD/GC/MS. To compare the adsorption efficiency of these phenolic compounds, three adsorbents (Tenax TA, Carbotrap and Carbopack B) were tested. Tenax TA adsorbent was most effective of all the adsorbents used for the efficiency test. Five phenolic compounds were found to be very stable on adsorbent tubes for 4 days at room temperature. Detection limit of five phenolic compounds ranged from 0.05 to 0.08 ppb (when assumed to collect 10 L air). The calibration curve was linear over the range of 22∼ 164 ng. The reproducibility was less than 4%. Sampling of duplicate pairs (DPs) was made to demonstrate duplicate precision and sampling efficiency.

• YAKHAK HOEJI
• /
• v.52 no.1
• /
• pp.12-19
• /
• 2008

The organic acids (formic acid, acetic acid and propionic acid), phenol and benzopyrene in wood vinegar were determine by HPLC. An $Atlantis^{TM}dC_{18}$ column with a acetonitrile: 0.1% phosphoric acid (5: 95, organic acids), acetonitrile: water (10 : 90, phenol), 100% acetonitrile (benzopyrene) as a mobile phase was used. Retention time of acetic acid, formic acid, propionic acid, phenol and benzopyrene was 4.77, 3.73, 9.08, 30.97 and 6.10 min, respectively. The calibration curves of organic acids, phenol, benzopyrene were linear over the concentration range of $30{\sim}500,\;60{\sim}1000$, and $3{\sim}50\;{\mu}g/ml$ with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of acetic acid, formic acid, propionic acid, phenol, and benzopyrene was 1.71 and 5.19, 1.11 and 3.35, 4.87 and 14.74, 6.45 and 19.55, 0.08 and $0.24\;{\mu}g/ml$, respectively. The coefficients of variation for intra- and inter-day assay were $0.21{\sim}4.14$ and $0.07{\sim}1.19%$, respectively and the precision was $95{\sim}115%$. From this study, we suggest that HPLC is suitable method for the determination of organics in wood vinegar and could be applied to quality control of wood vinegar.