• Journal of Magnetics
• /
• 제14권1호
• /
• pp.7-10
• /
• 2009

In this work, we studied the effects of Sn addition on the ordering temperature of FePt thin film. The coercivity of FePtSn film was about 1000 Oe greater than the coercivity of FePt film for an annealing temperature of $600^{\circ}C$. Therefore, Sn addition was effective in promoting the $L1_0$ ordering and in reducing the ordering temperature of the FePt film. From our X-ray diffraction results, we found that in the as-deposited film, the addition of Sn induced a lattice expansion in disordered FePt thin films. After the annealing process, the excess Sn diffuses out from the ordered FePt thin film because of the difference in the solid solubility of Sn between the disordered and ordered phases. The existence of precipitates of Sn from the FePt lattice was deduced by Curie temperature measurements of the FePt and FePtSn films. Therefore, the key role played by the addition of Sn to the FePt film can be explained by a reduction in the activation energy for the $L1_0$ order-disorder transformation of FePt which originates from the high internal stress in the disordered phase induced by the supersaturated Sn atoms.

• 한국산학기술학회논문지
• /
• 제9권1호
• /
• pp.16-22
• /
• 2008

10nm Ni/30 nm와 70nm poly Si/200nm $SiO_2/Si(100)$ 구조로부터 니켈실리사이드의 열적안정성을 연구하기 위해서 쾌속열처리기를 이용하여 실리사이드화 온도 $300{\sim}1100^{\circ}C$에서 40초간 열처리하여 실리사이드를 제조하였다. 준비된 실리사이드의 면저항값 변화, 미세구조, 상 분석, 표면조도 변화를 각각 사점면저항측정기, FE-SEM, TEM, HRXRD, SPM을 활용하여 확인하였다. 30 nm 다결정실리콘 기판 위에 형성된 실리사이드는 $900^{\circ}C$까지 열적안정성이 있었다. 반면에 70 nm 다결정실리콘 기판 위에 형성된 실리사이드는 기존연구결과와 동일한 $700^{\circ}C$ 이상에서 고저항상인 $NiSi_2$로 상변화 하였다. HRXRD로 확인한 결과, 30 nm 두께의 기판 위에 니켈실리사이드는 $900^{\circ}C$ 고온에서도 NiSi상이 유지되다가 $1000^{\circ}C$에서 $NiSi_2$로 상변화 하였다. FE-SEM 과 TEM 관찰결과, 30 nm 두께의 다결정실리콘 기판에서는 $700^{\circ}C$의 저온처리에는 잔류 다결정실리콘 없이 매우 균일하고 평탄한 40 nm의 NiSi가 형성되었고, $1000^{\circ}C$에는 선폭 $1.0{\mu}m$급의 미로형 응집상이 생성됨을 확인하였다. 70 nm 두께의 다결정실리콘 기판에서는 불균일한 실리 사이드 형성과 잔류 다결정실리콘이 존재하였다. SPM결과에서 전체 실험구간에서의 RMS 표면조도 값도 17nm 이하로 CMOS공정의 FUSI게이트 적용의 가능성을 보여주었다. 다결정실리콘 게이트의 높이를 감소시키면 니켈실리사이드는 상안정화가 용이하며 저저항구간을 넓힐 수 있는 장점이 있었다.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.629-635
• /
• 2001

고온구조용 재료로 사용이 기대되는 $Al_3$Hf금속간 화합물의 단점인 낮은 연성을 개선하기 위하여 SPEX mill을 이용한 기계적 합금화 과정에서의$ Ll_2$상 생성거동과 이에 미치는 제3원소의 영향, 그리고 이들 금속간 화합물의 진공열간 압축성형 거동을 조사하였다. Al과 Hf 혼합분말을 기계적 합금화한 결과에 따르면 6시간 milling후에 $L_2$Hf 금속간 화합물이 생성되었으며, 이때 결정립 크기가 7~8nm 정도인 nanocrystalline이 형성되었다. Cu를 첨가한 경우에는 10시간 milling 후에 2원계와 동일한 $Ll_2$구조의 금속간 화합물이 생성되었으며, 격자상수는 Cu의 함량이 증가함에 따라 감소하였다. 2원계 $Al_3$Hf 금속간 화합물의 경우에 $Ll_2$상에서 $D0_{23}$ 상으로의 변태 시작온도는 $380^{\circ}C$ 정도였으며, 변태 종료온도는 열처리시간에 따라 $480^{\circ}C$에서 $550^{\circ}C$ 정도를 나타내었다. Cu 함량이 증가함에 따라 변태 시작온도는 상승하였으며 10at.%의 Cu 첨가는 변태 시작온도를 $700^{\circ}C$까지 상승시켰다. 2원계 Al-25at.%Hf 혼합분말의 VHP 성형시 750MPa, $400^{\circ}C$, 3시간에서 약 89%의 비이론 밀도를 얻을 수 있었다. 같은 온도에서 Cu를 10at.% 첨가한 경우의 VHP 성형시 90%정도의 비이론 밀도를 보여 2원계 $A1_3$Hf보다 성형성이 약간 증가하는 것을 볼 수 있었으며, 성형온도를 $500^{\circ}C$로 증가시킨 경우에는$ Ll_2$상에서 $D0_{23}$상으로의 상변화나 결정립의 증가없이 약 92.5%의 비이론 밀도를 얻을 수 있었다.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.126-130
• /
• 2013

In this study, a shape-stabilized phase change material (SSPCM) was prepared by octadecane and exfoliated graphite nanoplate (xGnP) in a vacuum, to improve thermal storage performance. The octadecane as an organic phase change material (PCM) is very stable against phase separation of PCM, and has the proper temperature range for thermal comfort in the building; and the xGnP is a porous carbon nano-material. Scanning electron microscope (SEM) and Fourier transformation infrared spectrophotometer (FT-IR) were used to confirm the chemical and physical stability of the Ocatadecane/xGnP SSPCM. In addition, thermal properties were determined by Deferential scanning calorimeter (DSC), and Thermogravimetric analysis (TGA). The specific heat of Octadecane/xGnP SSPCM was $14.1J/g{\cdot}K$ at $31.3^{\circ}C$. The melting temperature ranges of melting and freezing were found to be $26{\sim}35^{\circ}C$ and $26{\sim}19^{\circ}C$, respectively. At this time, the latent heats of melting and freezing were 110.9 J/g and 104.5 J/g, respectively. The Octadecane was impregnated into xGnP by as much as about 56.0% of the Octadecane/xGnP SSPCM's mass fraction.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.282-287
• /
• 2023

본 연구에서는 Laser Powder bed fusion(L-PBF) 공정을 사용하여 제작된 Ti-6Al-4V 합금 적층성형품의 응력제거 열처리 온도와 시간의 변화에 따른 미세조직, 잔류응력 그리고 경도의 변화를 연구하였다. 잔류응력 제거를 위한 열처리 시험 결과 823 K에서는 240분, 873K에서는 60분 이상 열처리시 치수변화 및 기계적 특성 저하를 야기하는 결정립 성장 및 상변화 발생 없이 대부분의 잔류응력이 3 0 MPa 이하로 감소되는 것을 확인하였다. 또한, 열처리 온도 및 시간의 증가와 함께 경도가 증가하는 경향을 보였다. 이러한 결과는 XRD 및 SEM-EBDS의 phase map 분석을 통해 확인되지 않지만, 773~873 K 온도범위에서 등온 열처리시 국부적인 침상 Martensitic α' 상의 미세화가 원인으로 추정된다.

• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.56-65
• /
• 2024

Cast austenitic stainless steels (CASS) and austenitic stainless steel weldments with a ferrite-austenite duplex structure are widely used in nuclear power plants, incorporating ferrite phase to enhance strength, stress relief, and corrosion resistance. Thermal aging at 290-325℃ can induce embrittlement, primarily due to spinodal decomposition and G-phase precipitation in the ferrite phase. This study evaluates the effects of thermal aging by collecting and analyzing various mechanical properties, such as Charpy impact energy, ferrite microhardness, and tensile strength, from various literature sources. Different model expressions, including hyperbolic tangent and phase transformation equations, are applied to calculate activation energy (Q) of room-temperature impact energies, and the results are compared. Additionally, predictive models for Q based on material composition are evaluated, and the potential of machine learning techniques for improving prediction accuracy is explored. The study also examines the use of ferrite microhardness and tensile strength in calculating Q and assessing thermal embrittlement. The findings provide insights for developing advanced prediction models for the thermal embrittlement behavior of CASS and the weldments of austenitic steels, contributing to the safety and reliability of nuclear power plant components.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.286-292
• /
• 2020

Imaging through multicore fiber (MCF) is of great significance in the biomedical domain. Although several techniques have been developed to image an object from a signal passing through MCF, these methods are strongly dependent on the surroundings, such as vibration and the temperature fluctuation of the fiber's environment. In this paper, we apply a new, strong technique called deep learning to reconstruct the phase image through a MCF in which each core is multimode. To evaluate the network, we employ the binary cross-entropy as the loss function of a convolutional neural network (CNN) with improved U-net structure. The high-quality reconstruction of input objects upon spatial light modulation (SLM) can be realized from the speckle patterns of intensity that contain the information about the objects. Moreover, we study the effect of MCF length on image recovery. It is shown that the shorter the fiber, the better the imaging quality. Based on our findings, MCF may have applications in fields such as endoscopic imaging and optical communication.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.95-100
• /
• 2015

The in-situ heating transmission electron microscopy experiment allows us to observe the time- and temperature-dependent dynamic processes in nanoscale materials by examining the same specimen. The temperature, which is a major experimental parameter, must be measured accurately during in-situ heating experiments. Therefore, calibrating the thermocouple readout of the heating holder prior to the experiment is essential. The calibration can be performed using reference materials whose phase-transformation (melting, oxidation, reduction, etc.) temperatures are well-established. In this study, the calibration experiment was performed with four reference materials, i.e., pure Sn, Al-95 wt%Zn eutectic alloy, NiO/carbon nanotube composite, and pure Al, and the calibration curve and formula were obtained. The thermocouple readout of the holder used in this study provided a reliable temperature value with a relative error of <4%.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.189-205
• /
• 1996

The twin-roll type strip continuous casting process(or direct rolling process) of steel materials is characterized by two rotating water cooled rolls receiving a steady supply of molten metal which solidifies onto the rolls. A solidification analysis of molten metal considering phase transformation and thermofluid is performed using finite diffefence method with curvilinear coordinate to reduce computing time and molten region analysis with arbitrary shape. An enthalpy-specific heat method is used to determine the temperatures inthe roll and the steel. The temperature distribution of cooling roll is calculated using two dimensional finite element method, because of complex roll shape due to cooling hole in rolls and improvemnt accuracy of calculation result. The energy equaiton of cooling roll is solved simultanuously with the conservation equaiton of molten metal in order to consider heat transfer through the cooling roll. The calculated roll temperature is compared to experimental results and the heat transfer coefficient between cooling roll surface and rolling material(steel) is also determined from comparison of measured roll temperature and calculated temperature.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.427-431
• /
• 2012

The $TiO_2$ foam synthesized using freeze-casting is a promising photocatalyst and photovoltaic electrode for a variety of energy applications, because the freeze-casting technique is easy to use, cheap, and suitable for mass-production. Despite its several advantages, little scientific information is available on the processing and morphology of the $TiO_2$ foams processed by freeze-casting. In particular, no systematic study has been performed on the microstructural evolution and morphological change of the rutile-phase $TiO_2$ foams during sintering. Therefore, in the present study, several $TiO_2$ foam samples were produced using the freeze-casting technique, which were then sintered at a relatively high temperature of $1200^{\circ}C$ for 1, 2, and 4 h to compare the morphological changes in the microstructure and to understand the effects of processing parameters of the rutile-phase $TiO_2$ foams. The foam ligament size increased near linearly with increasing sintering time whereas the average pore size decreased only slightly with increasing sintering time, with changes in particle morphology from sphere to rod and complete phase transformation from anatase to rutile.