• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.367-376
• /
• 1992

The powder characteristics of seeded alumina prepared from alkoxide by sol-gel method were studied. When ${\alpha}$-Al2O3 seeded powders used, these ${\alpha}$ phase transformation temperatures decreased than those of unseeded powders by 110$^{\circ}C$ and fine powders under 0.1 $\mu\textrm{m}$ could be obtained. When Fe-nitrate added powders used, fast transformation rate resulted from ionic effects of Fe3+, but hard aggregated morphology exhibited. When ${\alpha}$-Al2O3 and Fe nitrate simultaneously added, these powders represented lower transformation temperature but resulted in microstructure with aggregated particles.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.146-155
• /
• 2020

To elucidate the effect of heat inputs on phase transformation and resistance to intergranular corrosion of F316 austenitic stainless steel (ASS), thermodynamic calculations of each phase and time-temperature-transformation diagram were conducted using JMaPro simulation software, oxalic acid etch test, double-loop electrochemical potentiokinetic reactivation test (DL-EPR), field emission scanning electron microscopy with energy dispersive spectroscopy, and transmission electron microscopy analyses of Cr carbide (Cr₂₃C₆), austenite phase and ferrite phase. F316 ASS containing a relatively low C content of 0.043 wt% showed a slightly sensitized microstructure (acceptably dual structure) due to a small amount of Cr carbide precipitated at heat affected zone irrespective of heat inputs. Based on results of DL-EPR test, although heat input was increased, the ratio of I_r to I_a was only increased very slightly due to a slight sensitization. Therefore, heat inputs have little influences on resistance to intergranular corrosion of F316 austenitic stainless steel containing 0.043 wt% C.

• 한국재료학회지
• /
• 제2권5호
• /
• pp.320-329
• /
• 1992

2mol%의 이트리아로 안정화된 정방정상 지르코니아 분말을 80$0^{\circ}C$부터 150$0^{\circ}C$ 까지 온도별로 열처리하여 분말내 입자크기 및 입자간에 존재하는 구속력을 변화시킨 다음, 정방정상의 전이도 및 안정화효과가 무열상전이, 응력유기상전이, 등온상전이 에 미치는 영향을 고찰하였다. 그 결과 Y-TZP 분말내 정 방정상의 전이도는 고용체의 양이 일정할 경우 열처리온도의 변화에 따른 입자크기와 입자간에 존재하는 구속력의 크기에 의존하였는데 열처리온도가 증가함에 따라 전이도가 점차 증가하여 130$0^{\circ}C$로 열처리한 분말에서 최대값을 보였다. 그러나 130$0^{\circ}C$ 이상으로 열처리한 분말에서는 열처리온도가 증가함에 따라 구속효과의 증가에 따라 전이도가 정차로 감소하였다. 전이도가 큰 분말에서는 정방정상이 무열상전이, 응력유기상전이, 등온상전이를 쉽게 일으켜 단사정상으로 전이하였다.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.28-33
• /
• 2014

Recently, the actuator worked by the driving recovery-force of the thermo elastic martensitic transformation of shape memory alloys(SMA) has been studied. This paper presents a study on the fatigue life of shape memory alloy (SMA) actuators undergoing thermally induced martensitic phase transformation under various stress levels. shape memory recoverable stress and strain of Ti-44.5at.%Ni-8at.%Cu alloys were by means of constant temperature tensile tests. Differential scanning calorimetry (DSC) was employed in order to investigate the transformation characteristics of the alloy before the tests. the results were summarized as follows. The martensite inducing stress incerased with the increasing of the Cu-contents. The fatigue life decreased with the increasing of the test load and the Cu-content. The data acquired will be very useful during the design process of an SMA NiTiCu element as a functional part of an actuator.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.58-62
• /
• 2015

Formation of an icosahedral phase in the bulk glass forming $Ti_{40}Zr_{29}Be_{14}Cu_9Ni_8$ alloy during crystallization from amorphous phase and solidification from melt is investigated. The icosahedral phase with a size of 10 to 15 nm forms as a thermodynamically stable phase at intermediate temperature during the transformation from amorphous to crystalline phases such as Laves and ${\beta}$-(Ti-Zr) phases, indicating that the existence of the icosahedral cluster in the undercooled liquid. On the other hand, the icosahedral phase forms as a primary solidification phase even though the Laves phase is stable at high temperature, which is can be explained based on the high nucleation rate of icosahedral phase relative to that of competing crystalline Laves phase due to lower interfacial energy between icosahedral and liquid phases.

• 한국결정성장학회지
• /
• 제20권5호
• /
• pp.216-220
• /
• 2010

Si(100) wafer와 $SiO_2$/Si(100) 웨이퍼에 증착된 NiFe 합금 박막의 결정상과 자기적 특성을 비교하고자 동시 스퍼터링법을 이용하여 두 기판 위에 150 nm의 박막을 제조하여 그의 상변화와 자기적 특성을 XRD, FE-SEM, VSM으로 비교하였다. 두 기판 위에 증착된 NiFe 박막은 BCC상으로 증착되었으나 $400^{\circ}C$에서 2시간 열처리를 한 결과 BCC에서 FCC로의 상전이가 일어나는 것을 관찰 할 수 있었으며 Si(100) wafer위에 증착된 박막에서는 $500^{\circ}C$에서 열처리 후에도 BCC와 FCC가 혼재하여 나타나는 것을 알 수 있었다. $450^{\circ}C$에서 열처리 하였을 때 각형비가 가장 높았으며 포화자화는 0.0118 emu로 나타나고 있었다. $500^{\circ}C$ 이상의 온도에서는 상전이로 인해 포화자화가 급격히 감소하는 것을 볼 수 있었다.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.1-7
• /
• 2004

This study investigated the effects of aging on the transformation behavior of $Ti-50.1at\%$ Ni alloy by means of differential scanning calorimetry. It was found that aging in the temperature range of $350^{\circ}C\~550^{\circ}C$ induced complex transformation behavior, involving the R-phase and multiple-stage martensitic transformation. Usually aged Ni-rich NiTi alloys undergo martensitic transformation on cooling from high temperatures in two step : B2 to R and then R to Bl9'(normal behavior). But under certain ageing conditions, the transformation can also occur in three or more step(unusual multiple step behavior). In the present study we use differential seaming calorimetry(DSC) for a systematic investigation of the evolution of transformation behavior with ageing temperature and time.

• 동력기계공학회지
• /
• 제16권4호
• /
• pp.60-65
• /
• 2012

This study was carried out to investigate the effect of reverse transformation on the damping capacity in high manganese austenitic stainless steel. ${\alpha}^{\prime}$-martensite was formed with the specific direction and surface relief by deformation. Over 95% of the austenite phase was transformed to deformation-induced ${\alpha}^{\prime}$-martensite by 70% cold rolling. Reverse transformation became rapid above an annealing temperature of $550^{\circ}C$, but there was no significant transformation above $700^{\circ}C$. In addition, with increasing annealing time at $700^{\circ}C$, reverse transformation was induced rapidly, but the transformation was almost completed at 10 min. Damping capacity was increased up to $700^{\circ}C$, and than unchanged with the increasing annealing temperature. Damping capacity increased steeply with an increasing reverse treatment time up to 10min, whereas there were no significant change with a treatment time of more than 10 min. Damping capacity increased with an increasing the reversed austenite and was strongly affected by reversed austenite.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.37-43
• /
• 2015

In present work, work-hardening behavior of TiCu-based bulk metallic glass composite with B2 particles has been studied by systemic structural and mechanical investigations. After yield, pronounced work-hardening of the alloy was clearly exhibited, which was mainly related to the martensitic transformation as well as the deformation twinning in B2 particles during deformation. At the early plastic deformation stage (work-hardening stage), the stress-induced martensitic transformation from B2 phase to B19' phase and deformation-induced twinning of B19' phase was preferentially occurred in the around interface areas between B2 phase and amorphous matrix by stress concentration. The higher hardness value was observed in vicinity of interface within the B2 particles which are probably connected with martensitic transformation and deformation twinning. This reveals that the work-hardening phenomenon of this bulk metallic glass composite is a result of the hardening of B2 particles embedded in amorphous matrix.

• 광물과 암석
• /
• 제36권4호
• /
• pp.313-321
• /
• 2023

자연환경에 유출된 방사성 세슘(Cs)을 흡착 격리시키기 위한 다양한 연구들이 진행되어왔고 이 중에서 광물의 흡착 및 고온 처리는 제올라이트의 예에서 보여지는 것과 같이 매우 유효한 방법일 수 있다. 본 연구에서는 버네사이트를 Cs으로 이온 교환 시킨 후 고온 처리하여 광물상의 변화와 함께 Cs의 용출 특성을 알아보았다. 버네사이트는 MnO₆ 팔면체가 모서리를 공유하는 층상구조를 가지고 있는 광물로서 양이온 흡착능력이 뛰어난 광물이다. Cs을 이온 교환시킨 버네사이트를 1100℃까지 고온 처리한 결과, 온도가 증가함에 따라 크립토멜레인, 빅스바이트, 버네사이트, 하우스마나이트로 광물상의 변화가 관찰되었다. 이는 터널구조의 망간산화물 광물인 토도로카이트를 Cs으로 이온 교환시킨 후 열처리하였을 때 버네사이트와 하우스마나이트로만 상변화를 거치는 것과 다른 결과를 보여준다. Cs으로 이온 교환된 버네사이트는 증류수와 1 M NaCl 용액과 반응 시간을 달리하여 용출량을 측정하였으며 이러한 용출량은 각 온도구간에서의 광물상 변화, 반응시간, 반응 용액의 종류에 따라 상이한 용출량을 보였다. 증류수와 반응한 시료에 비하여 1 M NaCl과 반응한 시료에서 이온교환 반응에 의하여 용출량이 더 많았고 반응시간이 길어질수록 용출량은 증가하였다. 증류수와 반응한 경우는 Cs의 용출량이 증가하다 감소하고 NaCl 용액에서 반응시킨 시료의 경우 용출량의 감소 후 다시 증가하고 최종적으로는 1100℃에서는 증류수와 같이 거의 용출되지 않았다. 이러한 용출량의 변화는 각 온도에서 형성된 광물상과 밀접한 관련이 있다. 크립토멜레인과 버네사이트로의 상변화는 Cs의 용출량을 증가시키지만, 빅스바이트와 하우스마나이트는 Cs의 용출을 억제하며 가장 높은 온도에서 나타나는 가장 안정된 하우스마나이트는 Cs의 용출을 가장 크게 억제할 수 있는 것으로 보인다. 이러한 결과는 Cs을 이온 교환시킨 버네사이트의 고온처리를 통하여 Cs의 고정 및 격리가 효적으로 이루어질 수 있음을 보여준다.