• 제목/요약/키워드: phase error

검색결과 1,993건 처리시간 0.036초

Spotlight SAR 신호처리기법 FSA를 이용한 위성 자세오차로 인한 위상오차 영향분석 및 보정 (The Effect Analysis and Correction of Phase errors by Satellite Attitude Errors using the FSA for the Spotlight SAR Processing)

  • 심상흔
    • 한국군사과학기술학회지
    • /
    • 제10권2호
    • /
    • pp.160-169
    • /
    • 2007
  • In this paper, we have described and simulated the effect analysis and correction of phase errors in the SAR rawdata induced by satellite attitude errors such as drift, jitter. This simulation is based on the FSA(Frequency Scaling Algorithm) for high resolution image formation of the Spotlight SAR. Phase errors produce the degradation of SAR image quality such as loss of resolution, geometric distortion, loss of contrast, spurious targets, and decrease in SNR. To resolve this problem, this paper presents method for correction of phase errors using the PGA(Phase Gradient Algorithm) in connection with the FSA. Several results of the phase errors correction are presented for Spotlight SAR rawdata.

이원부호의 위상오프셋 오류 검출 (Error Detection of Phase Offsets for Binary Sequences)

  • 송영준;한영렬
    • 전자공학회논문지S
    • /
    • 제36S권9호
    • /
    • pp.27-35
    • /
    • 1999
  • 본 논문은 정수론에 기반하여, PN (Pseudo Noise) 확산부호를 포함한 이원부호의 위상오프셋 오류검출방법을 제안한다. 부호분할다원접속 (code division multiple access : CDMA) 이동 통신 시스템에서는 확산부호의 위상오프셋을 인용하여, 각 기지국을 구분하고 있으므로 위상오프셋을 안다는 것은 매우 중요하다. 부호의 주기가 길지 않을 경우는 한 부호와 이전된 부호 사이의 위상 오프셋은 두 부호를 비교하여 구할 수 있지만, 부호의 주기가 길어지면 이러한 방법으로는 어려움이 따른다. 제안된 방법의 오류검출실패확률 식을 유도하고 시뮬레이션 결과를 이용하여 검증한다. 그리고 회고 구현 방법에 관하여서도 논하며, 간단한 회로로 구현할 수 있음을 보인다.

  • PDF

Error Forecasting Using Linear Regression Model

  • Ler, Lian Guey;Kim, Byung-Sik;Choi, Gye-Woon;Kang, Byung-Hwa;Kwang, Jung-Jae
    • 한국습지학회지
    • /
    • 제13권1호
    • /
    • pp.13-23
    • /
    • 2011
  • In this study, Mike11 will be used as the numerical model where a data assimilation method will be applied to it. This paper aims to gain an insight and understanding of data assimilation in flood forecasting models. It will start with a general discussion of data assimilation, followed by a description of the methodology and discussion of the statistical error forecast model used, which in this case is the linear regression. This error forecast model is applied to the water level forecast simulated by MIKE11 to produced improved forecast and validated against real measurements. It is found that there exists a phase error in the improved forecasts. Hence, 2 general formula are used to account for this phase error and they have shown improvement to the accuracy of the forecasts, where one improved the immediate forecast of up to 5 hours while the other improved the estimation of the peak discharge.

INS 속도 정보를 사용한 GPS 반송파 추적 루프의 성능 향상 (Performance Improvement of INS Velocity-aided GPS Carrier Tracking Loop)

  • 김정원;이상정;황동환
    • 제어로봇시스템학회논문지
    • /
    • 제12권8호
    • /
    • pp.739-745
    • /
    • 2006
  • This paper presents performance improvement of the INS velocity-adided GPS carier tracking loop. To this end, INS velocity-aided GPS carrier tracking loop was modeled as a feedfoward and a feedback loop system. In the phase tracking loop, it was shown that the tracking error caused by the dynamic motion of the vehicle can be compensated with the aiding of the INS information irrespective of the loop order and bandwidth. However, the signal trcking error increases as the INS error increases. It was also shown that in order to remove the tracking error caused by INS bias error, more than or equal to 2nd order PLL should be used. Experiments were carried out and the experimental results were compared with the analysis results.

Current-Steered Active Balun with Phase Correction

  • Park, Ji An;Jin, Ho Jeong;Cho, Choon Sik
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권6호
    • /
    • pp.629-633
    • /
    • 2015
  • An active balun using current steering for phase correction is presented. The proposed active balun is constructed with two different unit balun structures based on current steering to reduce phase and amplitude errors. This type of topology can be compared with the conventional phase and amplitude correction techniques which do not incorporate the current steering. Designed and fabricated active balun in $0.18{\mu}m$ CMOS process operates over 0.95 - 1.45 GHz band, showing input reflection coefficient under -15 dB, phase error of $11^{\circ}$ and gain error of 0.5 dB. Gain is measured to be 0.3 dB maximum and power consumption of 7.2 mW is measured.

2-step Quadrature Phase-shifting Digital Holographic Optical Encryption using Orthogonal Polarization and Error Analysis

  • Gil, Sang Keun
    • Journal of the Optical Society of Korea
    • /
    • 제16권4호
    • /
    • pp.354-364
    • /
    • 2012
  • In this paper, a new 2-step quadrature phase-shifting digital holographic optical encryption method using orthogonal polarization is proposed and tolerance errors for this method are analyzed. Unlike the conventional technique using a PZT mirror, the proposed optical setup comprises two input and output polarizers, and one ${\lambda}$/4-plate retarder. This method makes it easier to get a phase shift of ${\pi}$/2 without using a mechanically driven PZT device for phase-shifting and it simplifies the 2-step phase-shifting Mach-Zehnder interferometer setup for optical encryption. The decryption performance and tolerance error analysis for the proposed method are presented. Computer experiments show that the proposed method is an alternate candidate for 2-step quadrature phase-shifting digital holographic optical encryption applications.

비례공진 제어기를 이용한 단상 계통연계형 인버터의 데드타임 영향과 옵셋 오차로 인한 전류맥동 저감에 관한 연구 (A Study on Current Ripple Reduction Due to Offset Error and Dead-time Effect of Single-phase Grid-connected Inverters Based on PR Controller)

  • 성의석;황선환
    • 전력전자학회논문지
    • /
    • 제20권3호
    • /
    • pp.201-208
    • /
    • 2015
  • The effects of dead-time and offset error, which cause output current distortion in single-phase grid-connected inverters are investigated this paper. Offset error is typically generated by measuring phase current, including the voltage unbalance of analog devices and non-ideal characteristics in current measurement paths. Dead-time inevitably occurs during generation of the gate signal for controlling power semiconductor switches. Hence, the performance of the grid-connected inverter is significantly degraded because of the current ripples. The current and voltage, including ripple components on the synchronous reference frame and stationary reference frame, are analyzed in detail. An algorithm, which has the proportional resonant controller, is also proposed to reduce current ripple components in the synchronous PI current regulator. As a result, computational complexity of the proposed algorithm is greatly simplified, and the magnitude of the current ripples is significantly decreased. The simulation and experimental results are presented to verify the usefulness of the proposed current ripple reduction algorithm.

전류변성기의 비오차와 위상오차의 절대 평가 기술 (Absolute Evaluation Method to Obtain Ratio Error and Phase Displacement of Current Transformers)

  • 김윤형;정재갑;한상길;구경완;한상옥
    • 전기학회논문지P
    • /
    • 제57권2호
    • /
    • pp.153-159
    • /
    • 2008
  • We have developed an absolute evaluation method to obtain the ratio error and phase displacement of a current transformer (CT) without any precise standard CT by measuring four parameters in a CT equivalent circuit. The excitation admittance in the CT equivalent circuit can be obtained by employing standard resistors with negligible reactive component. The secondary leakage impedance in the CT equivalent circuit can be measured using a universal impedance bridge. The method was applied to CTs under test with the wide current ratios in the range of 5 A / 5 A - 5,000 A / 5 A and 5 A / 1 A - 5,000 A / 1 A. The ratio error and phase displacement of the CT under test obtained in this study are consistent with those measured at the national institute in Canada using the same CT under test within an expanded uncertainty (k = 2) in the overall current ratios.

최소 위상 오차를 갖는 곡선 배열안테나용 Rotman 렌즈의 설계 (Design of Rotman Lens for Curved Array Antenna with Minimal Phase Error)

  • 박주래;박동철
    • 한국전자파학회논문지
    • /
    • 제25권10호
    • /
    • pp.1077-1086
    • /
    • 2014
  • 컨포멀 배열에 적용할 수 있는 곡선 배열안테나용 Rotman 렌즈의 설계 방법을 제안한다. 본 논문에서는 곡선 배열안테나와 연동하여 Rotman 렌즈의 평행판 영역에 존재하는 배열 포트의 위치와, 배열 포트와 배열안테나 소자를 연결하는 전송선의 길이를 구하는 설계식을 유도하고, 이 설계식을 바탕으로 빔 곡선 최적화 절차와 재초점 절차를 통하여 위상 오차를 최소화하고 있다. 제안된 설계식과 설계 절차에 의해 설계된 Rotman 렌즈는 정확히 3초점을 보유한 채 직선 배열안테나뿐만 아니라, 원곡선, 포물선, V자형 곡선 등의 오목하거나 볼록한 배열안테나를 급전할 수 있으며, 최소의 위상 오차를 나타내고 있다.