• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.579-590
• /
• 2020

This paper's objective is to investigate the effect of gravity on a micropolar thermoelastic medium with voids. The problem is assessed according to the three-phase-lag model. An analysis of the resulting non-dimensional displacement, temperature variation, and internal stress of the study material is carried out and presented graphically. The non-dimensional displacement, temperature, micro-rotation, the change in the volume fraction field and stress of the material are obtained and illustrated graphically. Comparisons are made with the results predicted by different theories for different values of gravity, the phase-lag of the heat flux and the phase-lag of the temperature gradient. The numerical results reveal that gravity and relaxation times have a significant influence on the distribution of the field quantities. Some notable insights of interest are deduced from the investigation.

• 태양에너지
• /
• 제10권1호
• /
• pp.5-13
• /
• 1990

온도가 일정한 외벽을 열원으로 하는 수직원통형 축열조 내에 채워진 상변화물질의 내향용융 과정에서 자연대류에 의한 열전달현상을 유한차분법을 이용하여 수치해석하였고, 그 결과를 실험을 통하여 검증하였다. 상변화물질로는 용융점온포가 $42.5%^{\circ}C$ n-docosane paraffin($C_{22}H_{46}$)을 사용하였다. 본 연구 결과에서 상변화물질의 용융속도는 액상영역의 자연대류로 인하여 축열조 상부로 갈수록 빠른 것으로 나타났다. 그리고 상변화물질의 초기온도는 액상영역 속도분포에 큰 영향을 주지 않으며, 상변화물질의 초기온도가 낮을수록 용융속도는 늦어지고 축열조의 형상비($H/r_w$)가 커질수록 자연대류는 활발해지는 것으로 나타났다. 이러한 수치해석의 결과는 실험 결과와 잘 일치하였으나, 수치해석시 상변화물질의 용융에 따르는 체적팽창을 고려하지 않았기 때문에 용융이 진행 됨에 따라 오차가 발생하였다.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.43-52
• /
• 2008

The objective of this paper is to review the magnetic and magneto-transport properties of Co/$Co_2TiSn$ consisting of two metallic magnetic phases that are antiferromagnetically exchange-coupled at the phase boundary. The bulk Co/$Co_2TiSn$ system, which has a $Co_2$TiSn Heusler alloy precipitates in the hexagonal Co matrix, showed an unusual coercivity change with a concurrent change in temperature, and was modeled on the basis of a wall formation caused by exchange coupling at the phase boundary. For measurements of magneto-transport properties, Co/$Co_2TiSn$ thin films that had two-magnet phases were deposited using a magnetron sputtering system with a composite target. The magnetization process in the films is also explained on the basis of the model of wall formation at the phase boundary. Annealed Co/$Co_2TiSn$ films showed a 0.12% GMR effect, indicating the scattering of polarized conduction electrons due to the antiparallel exchange coupling at the phase boundary. The scattering process of conduction electrons at the phase boundary was modeled with relation to the magnetization process.

• KSBB Journal
• /
• 제29권3호
• /
• pp.205-209
• /
• 2014

Chromatographic enantiomer resolution of chiral amines was performed on several covalently immobilized and coated chiral stationary phases (CSPs) based on polysaccharide derivatives under the mobile phase conditions containing base or acid or acid/base additive. The chromatographic parameters including separation factors and capacity factors were greatly influenced by the nature of the mobile phase containing base or acid or salt additive as well as the used CSPs. When 0.05% triethylamine/0.05% trifluoroacetic acid as an additive in the mobile phase was used on all CSPs in this study, the greatest enantiomer resolution was observed except for Chiralpak AD. Also, it was shown that the change of base additive into acid or salt in the mobile phase may directly affect chiral recognition mechanisms between the chiral selectors and analytes occurring during enantiomer separation, resulting in the change of elution orders.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.84-93
• /
• 2018

냉각제 분사조건이 변화할 때 혼합가스 사출시스템 (또는 가스-스팀 발사체계) 냉각효율 및 발사체 사출성능의 변화를 확인하기 위해 3차원 수치모사를 수행하였다. 선행연구를 참조하여 구축한 1차원 모델을 통해 3차원 단상(single-phase) 계산모델을 검증한 후, Discrete Phase Model을 활용하여 고온의 기체에 냉각제 분사를 모사한 이상(two-phase) 유동 계산을 수행하였다. 냉각제 유량과 분사구 개수를 각각 변화시키면서 계산을 수행한 결과, 분사구 개수를 증가시켰을 경우 냉각효율이 보다 개선되었다. 또한 분사조건에 따라 냉각제 액적 서로간의 coalescence 발생 빈도 및 공간분포 변화가 발생하여 액적의 직경이 달라졌고, 이는 냉각제 증발률에 영향을 미쳤다. 냉각제의 증발은 breech 내부의 온도를 감소시키는 반면에 압력감소를 억제하여 사출시스템 최적화 설계에 있어 중요한 요소임을 확인하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.162-167
• /
• 2011

Thermal storage plays an important role in building energy saving, which is greatly assisted by the incorporation of latent heat storage in building materials. A phase change material is a substance with a high heat of fusion which, melting and solidifying at a certain temperature, can be storing and releasing large amount of energy. Heat is stored or released when the material changes from solid to liquid. Integration of building materials incorporating PCMs into the building envelope can result in increased efficiency of the built environment. The aim of this research is to identify thermal performance of PCMs impregnated building materials which is applied to interior of building such as gypsum and red clay. In order to analyze thermal performance of phase change materials, test-cell experiments and simulation analysis were carried out. The results show that micro-encapsulated PCM has an effect to maintain a constant indoor temperature using latent heat through the test-cell experiments. PCM wallboard makes it possible to reduce the fluctuation of room temperature and heating and cooling load by using EnergyPlus simulation program. Phase change material can store solar energy directly in buildings. Increasing the heat capacity of a building is capable of improving human comfort by decreasing the frequency of indoor air temperature swings so that the interior air temperature is closer to the desired temperature for a long period of time.

• 에너지공학
• /
• 제14권1호
• /
• pp.18-23
• /
• 2005

본 연구는 저온축열물질로서 TMA(Tri-methyl-amine, (CH₃)₃N)를 20～25 wt％로 포함하고 있는 TMA-물계 포접화합물의 냉각특성에 대하여 냉열원온도 -5℃에서 실험적으로 연구를 수행하였다. 연구결과, TMA의 질량농도가 증가할수록 상변화온도와 비열이 증가하였으며, 과냉도가 감소하고 액상유지시간이 단축되었다 특히, TMA 25wt%를 포함한 TMA-물계 포접화합물은 상변화온도 평균 5.8℃, 과냉도 8.0℃, 액상유지시간 10분, 비열 4.099kJ/kg℃를 나타내었다. 본 연구의 결과로부터 TMA-물계 포접화합물은 물보다 높은 상변화온도를 나타내었으며, 과냉도가 감소하고, 액상유지시간이 단축되는 과냉각 억제효과를 확인 할 수 있었다.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.13-19
• /
• 2014

Urea-SCR system is the selective catalytic reduction to reduce nitrogen oxides ($NO_x$) emitted from diesel vehicles. The objective of this study is numerical analysis of 3-dimensional unsteady melting problems of frozen urea by using an electric heater. It can be applied to determine capacity of power with respect to time and the location of the urea suction pipe in urea storage tank. The study includes the change of liquid volume fraction, temperature profiles and a influence of natural convection by using the commercial software STAR-CCM+(v7.06). The accuracy of the numerical analysis is estimated by comparisons with experimental data. After validation, a numerical analysis for freezing urea is conducted with four different heating power. From the results, it was found that relation of velocity of phase interface and amount of melting urea by increasing heating power in a container. There is also a difference in trend between velocity of phase interface and amounts of melting urea because of effect of natural convection.

• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.47-53
• /
• 1985

Various amount of $P_2O_5$ were added to $PbO-B_2O_3$ binary glass system to investigate its effect on the phase separation and physical properties of the glass. Experiments such as infrared spectroscopy scanning electron microscopy thermal expansion softening point and microhardnesses were done. Phase separation with $B_2O_3$ rich phase matrix and PbO rich phase droplet was observed for the glasses con-taining less than 10m/o of PbO while the opposite morphology of phase separation for the glasses containing more than 11m/o of PbO. By adding increasing amount of $P_2O_5$ their phase separation region was extended to the glass containing more than 20m/o of PbO. These effects can be interpreted in terms of the inoic field strength difference of each ions in the glasses. The abrupt changes of physical properties such as softening point thermal expansion and microhardness were observed for the glass with around 10m/o of PbO in this system. These changes are by the matrix composition change from TEX>$B_2O_3$ rich phase to PbO rich phase depending on PbO concentration.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.16-20
• /
• 2002

In this study, the 95W heavy alloys of 3/7, 5/5 and 7/3 of Ni/Fe ratio were sintered at the temperature range between 1420 and $1480^{\circ}C$ for 1h and their microstructures were discussed for an effect of the ${\mu}$-phase $(Fe_7W_6)$ on the microstructure. The ${\mu}$-phase was observed in the only 95W-1.5Ni-3.5Fe alloy of 3/7 and it is thought to be formed and grown from the surface of the W particle. The W particle was surrounded with the ${\mu}$-phase and there were only the W particles and this phase without Ni-Fe-W matrix at the most part. The ${\mu}$-phase changed the interphase structure in the alloy and the grain growth of the W was suppressed because of interrupting the solution-reprecipitation of the W. The W content in the matrix was considered to be lowered due to the interruption of the solution-reprecipitation and the formation of the ${\mu}$-phase in the .