• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.684-687
• /
• 1998

The biggest problem common on to all forms of Phase Shift Interferometer is unwrapping the phase. Simple phase unwrapping algorithms assume that every pixel is within radians of its neighbors. If this is true, any reasonable algorithm will return the correct unwrapped phase. If not, correct unwrapped phase will not be obtained. In rough surface, frequently, neighboring pixels have phase steps greater than. This paper proposes the new method which makes phase steps smaller than by sub-pixel movement.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.94-100
• /
• 2008

This paper presents a new control method of single-phase active power filter (APF) for the compensation of harmonic current components in nonlinear loads. To facilitate the possibility of complex calculation for harmonic current detection of the single phase, a single-phase system that has two phases was constructed by including an imaginary second-phase giving time delay to the load current. The imaginary phase, which lagged the load current T/4 (Here T is the fundamental cycle) is used in the conventional method. But in this proposed method, the new signal as the second phase is delayed by the filter. Because this control method is applied to a single-phase system, an instantaneous calculation was developed by using the rotating reference frames synchronized to source-frequency rather than by applying instantaneous reactive power theory that uses the conventional fixed reference frames. The control scheme of single-phase APF for the current source with R-L loads is applied to a laboratory prototype to verify the proposed control method.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1043-1051
• /
• 2016

In this paper, double encryption technique of binary image using random phase mask and 2-step phase-shifting digital holography is proposed. After phase modulating of binary image, firstly, random phase mask to be used as key image is generated through the XOR operation with the binary phase image. And the first encrypted image is encrypted again through the fresnel transform and 2-step phase-shifting digital holography. In the decryption, simple arithmetic operation and inverse Fresnel transform are used to get the first decryption image, and second decryption image is generated through XOR operation between first decryption image and key image. Finally, the original binary image is recovered through phase modulation.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.97-103
• /
• 2001

The present study was investigated changes of precipitation behaviour of laves phase in ferrite single phase and ferrite-martensite dual phase and the mechanical properties of 10%Cr ferritic alloys. In the ferrite phase, laves phase was mainly precipitated, whereas in the martensite phase, carbide was preferentially formed during the initial stage of aging and with increasing aging time. Laves phase and carbide were simultaneously precipitated by precipitation of laves phase at around carbide. Strength and toughness were lowered by the disk-type precipitator in the initial stage of aging and toughness was recovered with increasing of aging time and then, decreasing by precipitation of laves phase.

• 열처리공학회지
• /
• 제14권5호
• /
• pp.286-291
• /
• 2001

This study was carried out to investigate the influence of ${\sigma}$ phase on the microstructure and mechanical properties in super duplex stainless steel. The precipitation of ${\sigma}$ phase during isothermal heat treatment showed the type S curves with a certain incubation period. The precipitation of ${\sigma}$ phase was precipitated at ferrite phase and interface of ferrite and austenite. Under the state of isothermal transformation, the precipitation of ${\sigma}$ phase was stimulated by applied stress. With increasing of volume fraction of precipitated ${\sigma}$ phase, tensile strength was increased and elongation was decreased with linear relationship, while in case of precipitated ${\sigma}$ phase was 5% over, impact value was rapidly decreased.

• 소성∙가공
• /
• 제10권5호
• /
• pp.383-388
• /
• 2001

In describing the plastic deformation behaviour of ultrafine-grained materials, a phase mixture model in which a polycrystalline material is regarded as a mixture of a crystalline phase and a grain boundary phase has been successful. The deformation mechanism for the grain boundary phase, which is necessary for applying the phase mixture model to polycrystalline materials, is modelled as a diffusional flow of matter along the grain boundary. A constitutive equation for the boundary diffusion creep of the boundary phase was proposed, in which the strain rate is proportional to (stress/grain siz $e^{2}$). The upper limit of the stress of the boundary phase was set to equal to the strength to the amorphous phase. The proposed model can explain the strain rate and grain size dependence of the strength of the grain boundary phase. Successful applications of the model compared with published experimental data are described.

• 한국재료학회지
• /
• 제23권6호
• /
• pp.329-333
• /
• 2013

The structural phase transformations of $0.7Pb(Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) were studied using high resolution x-ray diffraction (HRXRD) as a function of temperature and electric field. A phase transformational sequence of cubic (C)${\rightarrow}$tetragonal (T)${\rightarrow}$rhombohedral (R) phase was observed in zero-field-cooled conditions; and a $C{\rightarrow}T{\rightarrow}$monoclinic $(M_C){\rightarrow}$ monoclinic ($M_A$) phase was observed in the field-cooled conditions. The transformation of T to $M_A$ phase was realized through an intermediate $M_C$ phase. The results also represent conclusive and direct evidence of a $M_C$ to $M_A$ phase transformation in field-cooled conditions. Beginning from the zero-field-cooled condition, a $R{\rightarrow}M_A{\rightarrow}M_C{\rightarrow}T$ phase transformational sequence was found with an increasing electric field at a fixed temperature. Upon removal of the field, the $M_A$ phase was stable at room temperature. With increasing the field, the transformation temperature from T to $M_C$ and from $M_C$ to $M_A$ phase decreased, and the phase stability ranges of both T and $M_C$ phases increased. Upon removal of the field, the phase transformation from R to $M_A$ phase was irreversible, but from $M_A$ to $M_C$ was reversible, which means that $M_A$ is the dominant phase under the electric field. In the M phase region, the results confirmed that lattice parameters and tilt angles were weakly temperature dependent over the range of investigated temperatures.

• Journal of Oral Medicine and Pain
• /
• 제26권1호
• /
• pp.17-25
• /
• 2001

The purpose of this study is to evaluate the relationship of menstrual cycle and halitosis by measuring the concentrations of Voltile Sulfur Compounds, secretion rate of unstimulated saliva, secretion rate of stimulated saliva and viscosity of saliva during the menstrual cycle. The subjects were 19 female dental students of Yonsei University who had relatively good alignment of the teeth. They hadn't taken antibiotics or oral contraceptive pills during the few months prior to the experiment, and they didn't have any dental caries involving the pulp or periodontal disease. Lady-$Q^{(R)}$(Alpain Korea, Korea), which confirms the ovulation using saliva, was used to find out the menstrual cycle of subjects. Their history was taken and their basal body temperature was measured. On the basis of these data, the amount of Volatile Sulfur Compounds, secretion rate of unstimulated saliva, secretion rate of stimulated saliva, viscosity of saliva were measured during 1 day of the proliferative phase, 3 days of ovulatory phase and 1 day of the luteal phase within the menstrual cycle. The results were as follows : 1. The amount of Volatile Sulfur Compounds, secretion rate of unstimulated saliva, secretion rate of stimulated saliva, and viscosity of saliva showed no statistically significant cyclic change during proliferative phase, ovulatory phase, and luteal phase(p<0.05). 2. Between the secretion rate of unstimulated saliva and secretion rate of stimulated saliva, there was significant correlation during proliferative phase and luteal phase(p<0.05) and there was no significant correlation during ovulatory phase but relatively close result was seen. 3. The amount of Volatile Sulfur Compounds during proliferative phase and luteal phase had statistically significant correlation(p<0.05). 4. Secretion rate of stimulated saliva during proliferative phase and ovulatory phase, proliferative phase and luteal phase, ovulatory phase and luteal phase had significant correlations (p<0.01).

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.365-372
• /
• 1993

Variation of dielectric constant in PMN-Pyrochlore diphasic mixtures were investigated with grain size of pyrochlore phase. Size of pyrochlore phase was controlled by the numbers of calcining and sedimentation method during powder processing. When grain size of pyrochlore phase is large in the sintered specimen, dielectric constant slowly decreased with increase of amount of pyrochlore phase. On the contary, grain size of pyrochlore phase is small, dielectric constant drastically decreased. It was thought that small sized pyrochlore grains more easily surrounded high dielectric phase (perovskite PMN) than large ones with addition of pyrochlore phase.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.192-195
• /
• 2000

In describing the plastic deformation behaviour of fine grained materials a phase mixture model in which a polycrystalline material is regarded as a mixture of a crystalline phase and a grain boundary phase has been successful. The deformation mechanism for the grain boundary phase which is necessary for applying the phase mixture model is modelled as a diffusional flow of matter though the grain boundary. The proposed model can explain the strain rate and grain size dependence of the strength of the grain boundary phase.