• The KSFM Journal of Fluid Machinery
• /
• v.12 no.5
• /
• pp.47-53
• /
• 2009

A rotordynamic and detailed stability analysis in accordance with API 617 standard were performed with a turbo-compressor, which is one of key rotating machinery in refinery, petroleum, and power plants. The system is composed of rotor shaft, impeller, sleeve hub, balance drum, and coupling hub. The rotor system is supported by tilting pad bearings, which has 5 pads and pad on loading condition. The rotordynamic analysis specified by API 617 includes the critical speed map, mode shape analysis, Campbell diagram, unbalance response analysis, and stability analysis. In particular, the specifications of stability analysis consist of a Level 1 analysis that approximates the destabilizing effects of the labyrinth seals and aerodynamic excitations, and Level 2 analysis that includes a detailed labyrinth seal aerodynamic analysis. The results of a rotordynamic analysis and stability analysis can evaluate the operating compressor health and can be utilized as a guide of its maintenance, repair and trouble solution.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.110-118
• /
• 2002

During the last ten years, the need has been increase for reducing maintenance cost for aged equipments are ensuring safety, efficiency and profitability of petrochemical and refinery plants. American Petroleum institute(API) developed a code, API 581 for proposing standard procedures of risk based inspection. Even though the API 581 code covers general RBI procedures, there must be some limitations. In this study, a semi-quantitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly realRBI software is developed with a module for evaluation semi-quantitative risk category using the potential consequence factor and the likelihood factor. Also, inspection planning module for inspection time and inspection method for equipments are included.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.2 no.1
• /
• pp.31-36
• /
• 2004

Three workers, field operators in lubricating oil processing of petroleum refinery industry were found unconscious by other worker. One of them who were exposed to an high concentration of H2S was presented with Glasgow Coma Score of 5, severe hypoxemia on arterial blood gas analysis, normal chest radiography, and normal blood pressure. On hospital day 7, his mental state became clear, and neurologic examination showed quadriparesis, profound spasticity, increased tendon reflexes, abnormal Babinski response, and bradykinesia. He was also found to have decreased memory, attention deficits and blunted affect which suggest general cognitive dysfunction, which improved soon. MRI scan showed abnormal signals in both basal ganglia and motor cortex, compatible with clinical findings of motor dysfunction. Neuropsychologic testing showed deficits of cognitive functions. SPECT showed markedly decreased cortical perfusion in frontotemporoparietal area with deep white matter. Another case was recovered completely, but the other expired the next day.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.14-21
• /
• 2004

Spent catalysts containing platinum were generated in petroleum refinery and other chemical industries. The reclamation of platinum metals from such wastes has long been attempted in view of their rare, expensive and indispensable nature. In this study, the recovery of platinum from petroleum catalysts was attempted by a method consisting mainly of dissolving alumina carrier with sulfuric acid thereby concentrating insoluble platinum. Also, platinum dissolved partially in sulfuric acid was recovered by a cementation method using aluminum metal as a reductive agent. The effect of temperature, time, concentration of sulfuric acid, and pulp density on the dissolution of carrier was investigated. When the carrier of platinum catalyst was $\Upsilon-Al_2$O$_3$ about 95% alumina was dissolved in 6.0 M sulfuric acid at $100^{\circ}C$ for 2 hours. When the carrier was the mixture of $\Upsilon-Al_2$$O_3$ and $\alpha$-$Al_2$$O_3$ about 92% was dissolved after 4 hours. As a result, more than 99% of platinum could be recovered by this method and aluminum sulfate was also obtained as byproduct.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.104-113
• /
• 2015

This study tried to conduct a comparative analysis on the yearly economic effects of petroleum products sector. Inter-industry tables published 1990~2012 are used in this study. Especially petroleum products sector is specified as exogenous to identify the economic effects on own and other sectors. Production-inducing effect, value-added creation effect, and employment-inducing effect are quantified based on demand-driven model. The results of the analysis, the case of annual production inducing-effect, show the downward trend from 1993 to 2008. and It seemed to be constant from 2009 to 2012. The value-added inducing-effect, from 1990 to 1998, shows a rising trend. the since 1998, it was found to decline steadily. Employment-inducing effect is shown a steadily decreasing trend from 1990 to 2008, and has been kept constant from 2010 at the level under 1.300(person/one billion won). These results of in comparison with the past are significant in that it can be objectively evaluate the domestic oil industry at the present time. and it can be usefully utilized to predict the economic effect of future oil industry.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.943-962
• /
• 2014

Industrial gas drying, dilute gas mixtures purification, air fractionation, hydrogen production from steam reformers and petroleum refinery off-gases, etc are conducted by using adsorptive separation technology. The pressure swing adsorption (PSA) has certain advantages over the other methods, such as absorption and membrane, that are a low energy requirement and cost-effectiveness. A key component of PSA systems is adsorbents that should be highly selective to a gas being separated from its mixture streams and have isotherms suitable for the operation principle. The six standard types of isotherms have been examined in this review, and among them the best behavior in the adsorption of $CO_2$ as a function of pressure was proposed in aspects of maximizing a working capacity upon excursion between adsorption and desorption cycles. Zeolites and molecular sieves are historically typical adsorbents for such PSA applications in gas and related industries, and their physicochemical features, e.g., framework, channel structure, pore size, Si-to-Al ratio (SAR), and specific surface area, are strongly associated with the extent of $CO_2$ adsorption at given conditions and those points have been extensively described with literature data. A great body of data of $CO_2$ adsorption on the nanoporous zeolitic materials have been collected according to pressure ranges adsorbed, and these isotherms have been discussed to get an insight into a better $CO_2$ adsorbent for PSA processes.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.57-62
• /
• 2011

Modern chemical plants including petroleum refinery and gas industries have evolved into more complex and specialized. In these industrial complexes, it is important to maintain acceptable safety level protecting from various potential disasters caused by fire, explosion and the leakage of toxic materials. Recently possibility and consequence of accidents are increasing in the industrial process. So there is a trade-off between the plant operation efficiency and safety level. In this study SIF(Safety instrument Functions) was incorporated into SIL(Safety Integrity Levels). As a result, the safety level was upgraded by designing resonable allocation of safety instruments.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2010

The phenolic compounds are a major contaminant class often found in industrial wastewaters and the biological treatment is an alternative tool commonly employed for their removal. In this sense, monitoring microbial community dynamics is crucial for a successful wastewater treatment. This work aimed to monitor the structure and activity of the bacterial community during the operation of a laboratory-scale continuous submerged membrane bioreactor (SMBR), using PCR and RT-PCR followed by denaturing gradient gel electrophoresis (DGGE) and 16S rRNA libraries. Multivariate analyses carried out using DGGE profiles showed significant changes in the total and metabolically active dominant community members during the 4-week treatment period, explained mainly by phenol and ammonium input. Gene libraries were assembled using 16S rDNA and 16S rRNA PCR products from the fourth week of treatment. Sequencing and phylogenetic analyses of clones from the 16S rDNA library revealed a high diversity of taxa for the total bacterial community, with predominance of Thauera genus (ca. 50%). On the other hand, a lower diversity was found for metabolically active bacteria, which were mostly represented by members of Betaproteobacteria (Thauera and Comamonas), suggesting that these groups have a relevant role in the phenol degradation during the final phase of the SMBR operation.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.248-257
• /
• 2008

Coal liquefaction technology was established in Germany in 1920s. Coal liquefaction refers to the process in which coal is converted into liquid fuels such as gasoline and diesel oil under certain conditions. Coal liquefaction is usually classified into direct coal liquefaction (DCL) and indirect coal liquefaction (ICL). Various technologies for coal liquefaction, conducted between 1970s and 2000s, resulted in the development and optimization of a communication ready technology for the production of petroleum substitutes as refinery feedstocks. The purpose of this paper is to review the research, development and demonstration of coal liquefaction. In these respects, various DCL and ICL processes under development were illustrated and compared. Also, the status and perspective of coal liquefaction projects in the world were viewed. Considering the scale, and technical difficulties of domestic coal liquefaction, the project has be leaded by the government.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.942-949
• /
• 2012

In order to ensure the safety of the large-scale public facilities, the analysis of EMC(ElectroMagnetic Compatibility) of electronic systems included in the facilities is very necessary. The reason is that the system-level EMC of the facility could be not guaranteed, even if individual equipments included in the facility are satisfied with their EMC requirements. As a result, the system-level evaluation and analysis of EMC should be carried out in order to establish the reliable operations of safety and mission-critical electronic systems. This paper analyze the relevant legal systems of domestic and other countries, and furthermore case studies of system-level EMC approaches were analyzed in the specific applications of electric railways, building, automobile, petroleum refinery systems. And the introduction of related systems in Korea is proposed, and main parts and problems to be looked at each proposed measures are discussed. The results are expected to be utilized in the introduction of the system-level EMC engineering, and contributed in national security and the protection of people's life, body and their properties.