• Korean Journal of Food Science and Technology
• /
• v.6 no.4
• /
• pp.231-240
• /
• 1974

The growth of a mixed yeast culture consisting of Canda tropicalis var. KIST 76 and Tricosporon cutaneum KIST 76-H was compared with that of pure cultures under pilot plant conditions. The mixed culture was judged stable based on the nearly constant ratio of the two organisms at the completion of fermentation. We obtained higher cell yields, protein content and productivity in the mixed culture on n-paraffin than the pure culture of C. tropicalis var. KIST 76. T. cutaneum KIST 76-H did not grow on n-paraffin medium. With the batch cultivation of mixed organisms on n-paraffin, the specific growth rates during the exponential growth phase were 0.24-0.33 $hr^{-1};$ cell yields were 96-106% and productivities were 2.9-3.6g/l. hr. The cells obtained contained 55-58% crude protein and 5.5-6.3% lipid. The critical value of dissolved oxygen concentration Ccrit. and saturation constant, km, are approximately 1.5 ppm and 0.228 ppm respectively. Also we established the optimal conditions for the mixed culture in batch fermentation.

• Korean Journal of Food Science and Technology
• /
• v.10 no.3
• /
• pp.361-365
• /
• 1978

Physico-chemical characteristics of crude oil extracted from Korean Hazel nut were determined and its proximate composition was also analyzed. The proximate composition of Hazel nut was shown to be moisture 4.0%, crude protein 15.5%, crude fat 64%, nitrogen free extractive 11.7%, crude fiber 2.0% and crude ash 2.5%. The content of crude fat in Corylus sieboldiana was about 3% higher than in Corylus mandshurica.. Physico-chemical characteristics of crude oil found were: specific gravity, $0.916(15/15^{\circ}C)$; refractive index, $1.468(15^{\circ}C)$; saponification value, 184; iodine value, 94.5: acid value, 0.2; and unsaponifiable content, 0.25%. The lipid fractions in the crude oil obtained by silicic acid column chromatography were found to be composed of about 97% neutral lipids and about 3% compound lipids. Among the neutral lipids by TLC, triglycerides were 98% as the major components, free fatty acids and free strols were 0.5% and 1.3%, respectively. Esterified sterols were not found. The predominant fatty acids were oleic $(76{\sim}80%)$, linoleic (15%) and palmitic (5.0%), and the P/S ratio was $1.8{\sim}2.8$.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.164-178
• /
• 2009

This study was aimed to make GIS oiling thematic maps and analyze temporal oiling variation patterns for two months after 'Hebei Spirit' oil spill accident in December 7, 2007 using GIS and oiling status surveyed data. As a basic work for making of oiling thematic maps, geometric corrections were performed with IKONOS images using ground control points data. These corrected images were used to make detailed coastline from digital charts, and then spatial unit of coastline were defined using classified coastline types. And to know the representative parameters which reflect oiling situation, relationship between oiling status parameters extracted from four times oiling assessment reports and total petroleum hydrocarbons (TPHs) data (December 2007 and January 2008) monitored by Korea Ocean Research and Development Institute (KORDI). Using these representative oiling status parameters pollution value were calculated, and they were keyed into spatial unit of coastline as attributive value. GIS oiling status thematic maps made with coastline containing pollution value showed the initial two month's situations somewhat well. Also, to analyze temporal variation pattern of coastline types, about 13.4km length coastline around Malripo beach was defined as detailed study area where is the common spatial zone surveyed oiling status by each organizations. Based on this study results, it could be possible to provide oiling status maps quickly and to support decision making for oiling control action and scientific pollution monitoring.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.365-373
• /
• 2017

This study proposes a newly developed dry washing method for removing pollutants such as total petroleum hydrocarbon (TPH) and oxidized iron from the surface of ballast gravel. A batch-type dry washing method showed a good performance in a previous study. In this study, a continuous-type dry washing system, instead of a batch-type system, was prepared to improve the efficiency of the system. A drier and a separator were also applied to this system as pre-treatment process, and the performance of this system was evaluated. In this experiment, blasting media was blasted on the polluted gravels through 12 nozzles by a pressure of $5-6kg/cm^2$ for 20-30 mins to remove TPH and oxidized iron. It was found to be possible to remove 80-90% of TPH and oxidized iron by using this system. Several ways to improve the performance were suggested in this study.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.8-14
• /
• 2008

The effects of surfactant types and the ratio of nonionic and anionic surfactants on the washing of diesel contaminated soil were investigated. In batch tests, the nonionic surfactant, which has HLB within 12-13, showed a high diesel removal efficiency and Tergitol 15-S-7 (T15S7) with 20 g/L concentration exhibited the highest removal efficiency of 79-88% among the tested nonionic surfactants. Anionic surfactants, in general, showed lower removal efficiency than nonionic surfactants. In case of mixed surfactant system, the removal efficiency increased with nonionic surfactant concentration. With mixed surfactants of T15S7 and SDS as 3 : 1 ratio, diesel removal was enhanced to 76% with 10 g/L of the mixed surfactants. These results could be used in the selection of proper surfactants for remediation of diesel contaminated soils.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.63-72
• /
• 2012

The main objective of this study is to assess the compatibility between Korean ministry of environment (KME) standard and ISO (KS I ISO) standard for the determination of BTEX and TPH content in soil. We carried out comparison analysis for both methods using CRM and matrix spiked samples. In case of GC-MS analysis for BTEX, we got statistically (significance level: 0.05) the same results from KME standard (ES 07600.1) and ISO standard (KS I ISO 15009). However, it showed statistically (significance level: 0.05) different results when TPH was analyzed by KME standard (ES 07552.1) and ISO standard (KS I ISO 16703). To clarify the reason why both methods produced different results for TPH content, we also did some additional experiments in terms of differences in extraction, clean-up and target hydrocarbon range. Extraction with polar and non-polar compounds mixed solvent (acetone+n-heptane) of KS I ISO 16703 showed higher extraction efficiency than with only non polar solvent (dichloromethane) extraction of ES 07552.1 by about 9%. While column type clean-up of KS I ISO 16703 showed the reduction in TPH content between before and after clean-up, batch type of clean-up of ES 07552.1 did not show any changes in TPH content through clean-up process. The target hydrocarbon range of ES 07552.1 and KS I ISO 16703 is $C_8{\sim}C_{40}$ and $C_{10}{\sim}C_{40}$, respectively. From this point of view, kerosene and JP-8 contaminated soil showed higher RPD (relative producibility deviation) values between results by both method than that of lubricant or diesel contaminated soil. The higher content of hydrocarbon ($C_8{\sim}C_{10}$) in kerosene and JP-8 played an important role in increasing RPD values in addition to the effects caused by different solvents and clean-up method. Consequently, it was concluded that both methods (ES 07552.1 and KS I ISO 16703) were not compatible.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.59-71
• /
• 2014

We investigated soil contamination depending on the land use by examining the contamination levels and distribution characteristics of 16 polycyclic aromatic hydrocarbons (PAHs) in the national soil. Total PAHs (the sum of 16 PAH concentrations) and carcinogenic PAHs (the sum of seven carcinogenic PAH concentrations) were $8.50{\sim}3,437.16{\mu}g/kg$ and $2.94{\sim}2,136.96{\mu}g/kg$, respectively. The concentration of benzo(a)pyrene, one of the contaminants regulated by the soil quality standard in the nation, was $ND{\sim}924.73{\mu}g/kg$. Its maximum value of $924.73{\mu}g/kg$ was detected in railroad (Region 3) and is approximately 13% of the standard value for Region 3 (i.e., 7 mg/kg). We also investigated the characteristics of contamination sources of PAHs in soil of the upland, forests, roads, and railroads, examining the fraction distribution of PAHs concentration by the number of benzene rings against the total PAHs concentration. The results demonstrate that the mean fraction of 4~6-ring PAHs against total PAHs concentration in soil was in the range of 51.8~80.7% with relative abundance of high-molecular PAHs, showing that the origin of contamination is under the category of combustion sources. When the molecular indices (Flu/(Flu/Pyr), Ant/(Ant+Phe), InP/(InP+BP), and BaA/(BaA+Chr)) were applied, they were also categorized as petroleum-based combustion sources. The individual PAH concentrations in soil by the land use were grouped into Regions 1, 2, and 3, which are statistically treated and are the parts of the national category system of soil quality standard. As a result, the concentration level of 16 PAHs was $0.02{\sim}2.63{\mu}g/kg$ in Region 1, $0.05{\sim}4.26{\mu}g/kg$ in Region 2, and $2.36{\sim}178.27{\mu}g/kg$ in Region 3. The concentration level of 6 carcinogenic PAHs was 14.2~320.4% against that of benzo(a)pyrene in Region 3 and sites of recycling waste sleepers. Considering that there were similarities among PAHs in terms of structures and toxicities, it would be recommended to review other types of carcinogenic PAHs together with benzo(a)pyrene when developing the soil quality standards in the nation.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.10-18
• /
• 2021

CO₂ storage technology in an aquifer is one of the most effective way to decrease global warming due to a high storage capacity and economics. A demonstration-scale offshore CO₂ storage project was performed in a geological deep aquifer in the Pohang Basin, Korea for a technological development of large-scale CO₂ storage. A challenging issue in the early design stage of the project was to establish the proper injectivity during CO₂ injection. To solve this issue, injection conditions were calculated by calculating injection rate, pressure, temperature, CO₂ phase change, and thermodynamic properties. For this study, we simulated and numerically analyzed CO₂ phase change from gas to supercritical phase and flow behavior in transport piping and injection tubing using OLGA program. Our results provide the injectivity conditions of CO₂ injection system combined with a bottomhole pressure of an aquifer.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.652-656
• /
• 2018

In this study, effects of the reaction pressure were studied for petroleum-based pitch synthesis. A two-stage reaction process was performed based on different reaction pressure conditions. Each stage experiments for the two-stage reaction were consecutively carried out. The first stage was consisted of three different pressure conditions; high (10 bar), normal and low (0.1 bar). And the second stage was carried out at the normal and low (0.1 bar) pressure. The pitch synthesis was realized at $400^{\circ}C$ for 2 h. Thermal properties and molecular weight distributions of each samples were investigated by analyzing the softening point and MALDI-TOF data. Volatilized components during the pith synthesis were measured by GC-SIMDIS. In case of the first-step reaction with the high pressure condition, the low molecular weight component participated to the pitch formation more effectively and the pitch with the low softening point was obtained. However, for the case of the first-step with the low pressure, the low molecular weight component was vent outside and the partial coke formation occurred. Eventually, pitch properties such as the softening point and yield were controlled effectively by changing the pressure in the pitch synthesis reaction.

• Clean Technology
• /
• v.25 no.2
• /
• pp.140-146
• /
• 2019

Flammable substances, such as organic solvents, are commonly used in laboratories and industrial processes. The flash point of flammable liquid mixtures is a very important parameter for characterizing the ignition and explosion hazards, and the flash points of mixtures of $C_2{\sim}C_3$ alcohols and 2,2,4-trimethylpentane were measured in the present study. The 2,2,4-trimethylpentane is an important component of gasoline and is frequently used in the petroleum industry as a solvent. Lower flash point data were measured for the binary systems {ethanol + 2,2,4-trimethylpentane}, {1-propanol + 2,2,4-trimethylpentane}, and {2-propanol + 2,2,4-trimethylpentane}. The flash point measurements were carried out according to the standard test method (ASTM D3278) using a Stanhope-Seta closed cup flash point tester. The measured flash points were compared with the predicted values calculated using Raoult's law and also following $G^E$ models: Wilson, Non-Random Two Liquid (NRTL) and UNIversal QUAsiChemical (UNIQUAC). These models were able to predict the experimental flash points for different compositions of {$C_2{\sim}C_3$ alcohols + 2,2,4-trimethylpentane} mixtures with minimal deviations. The average absolute deviation between the predicted and measured lower flash point was less than 1.28 K. A minimum flash point behaviour was observed in all of the systems as in the many observed cases for the hydrocarbon and alcohol mixtures.