• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.472-477
• /
• 2017

Oil spills cause a lot of damage to the environment. Oil destroys the water environment and ecosystem in a very short period of time once they are contaminated by it, it takes a lot of time to recover from the contamination and the cleaning process is very difficult. Therefore, oil detectors are greatly needed as they can monitor any oil spills over the sea, rivers, and lakes. There are two kinds of technology available for detecting oil, viz. the contact and non-contact types. The former is based on the use of the conductivity, capacitance and microwaves, while the latter employs infrared, UV, laser, optic and radar technologies. As there are also various hurdles in the measuring of oil on water, such as the presence of waves, refraction of light, temperature and saltiness, it is imperative to select the right oil detector which is appropriate for the specific environment. In this study, a contact type oil detector is developed, which can be used in oil related industries, such as refineries, petrochemical companies, and power generation stations. The detector is made up of the sensor module, which floats on the water, and the controller which processes the signal coming from the sensor module and displays it. It is designed in such a way that the existence of oil is detected through the sensor and the change in the permittivity is observed to determine the volume and type of spilled oil.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.16-23
• /
• 2019

Fine particulate matter known as PM 2.5 refers to the atmospheric particulate matter that has a diameter less than 2.5 micrometer identified as dangerous element for human health and its concentration can provide us a clear picture about air dust concentration. Humans stay indoor almost 90% of their life time and also there is no official indoor dust concentration data, so our study is focused on measuring the indoor air quality. Indoor dust data monitoring is very important in hospital environments beside that other places can also be considered for monitoring like classrooms, cements factories, computer server rooms, petrochemical storage etc. In this paper, visible light communication system is proposed by Manchester encoding technique for electromagnetic interference (EMI)-free indoor dust monitoring. Important indoor environment information like dust concentration is transferred by visible light channel in wide range. An average voltage-tracking technique is utilized for robust light detection to eliminate ambient light and low-frequency noise. The incoming light is recognized by a photo diode and are simultaneously processed by a receiver micro-controller. We can monitor indoor air quality in real-time and can take necessary action according to the result.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.39-52
• /
• 2018

The Seosan-Daesan Port is a representative trade port in Chungnam, and has the sixth largest total cargo throughput and the third largest oil cargo throughput in Korea. However, research on this port's development is lacking relative to that for Busan Port, Incheon Port, and Gwangyang Port, and no study exists that suggests the direction of the development strategy for Seosan-Daesan Port. This study discusses the future role of Seosan-Daesan Port in preparation for a rapidly changing future and the development strategy that should be established. Using the AHP, a development strategy is provided for Seosan-Daesan Port from short/mid-term and long-term viewpoints for three aspects: operation activation, infrastructure construction, and policy support. Operation activation is chosen as the most significant factor from a short/mid-term viewpoint, whereas infrastructure construction is recognized as important from a long-term viewpoint. Specifically, from a short/mid-term viewpoint, sustainable container cargo attraction, multipurpose dock construction, management pier construction, and opening of international passenger ferry lines are important factors while from the long-term viewpoint, hinterland construction, petrochemical industry cluster construction, automobile industry cluster construction, and management improvement system are important. Establishing action plans for each strategy and a cooperative network for sharing goals and strengthening cooperation is necessary.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.2
• /
• pp.47-63
• /
• 2004

This study focuses on the petrography and petrochemical characteristics of the volcanic and plutonic rocks in Gadeog island, Busan, Korea. Based on textural and mineralogical characteristics, intermediate volcanic rocks can be divided into andesitic lava flows (porphyritic and massive andesites) and andesitic pyroclastics. Felsic volcanic rocks are composed of rhyolite, rhyolitic welded tuff, and tuff breccia. Plutonic rocks are intruded rhyolite and andesitic rocks, and composed of hornblende granodiorite which contains lots of mafic magma enclaves. Volcanic rocks are composed of andesite, dacite and rhyolite having a range in SiO$_2$ from 59 to 78wt.%. The volcanic rocks belong to the calc-alkaline rock series. Plutonic rocks have a range in SiO$_2$ from 63 to 69wt.%. This compositional variations correspond to those of Cretaceous volcanic and plutonic rocks in the southeastern Gyeongsang basin. The trace element composition and rare earth element patterns of the volcanics, which are characterized by high LREE/HFSE ratios and enrichment in LREE, suggest that they are typical of calc-alkaline volcanic rocks produced in the subduction environment around continental arc. We concluded that volcanic and plutonic rocks in Gadeog Island were evolved from orogenic andesitic magma which was produced by partial melting of the mantle wedge in the subduction environment.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.30-36
• /
• 2021

Residual life assessment of reformer tubes of mod HP steel used in the refinery and petrochemical industry were investigated by quantitative metallographic evaluation method. Area fractions of precipitated carbides were measured by using surface replication and its relationship with the remaining life of the tube was investigated. The microstructures of the virgin and other tubes were examined using optical microscopy (OM) for service periods of 1.8, 6.0, 7.2, 8.5, 9.7, and 16.2 years at 950 ℃ and the area fractions of the precipitates were measured by image analysis using ImageJ software. As the area fraction of the precipitates increased, the residual life was decreased accordingly. The results showed that the LMP was the highest in the virgin and the LMP decreased as the service time increased and the residual life decreased. A regressional equation showing the relation between the area fraction of carbides and LMP was experimentally derived. The obtained relationship can be used with the surface replication method for on-site residual life assessment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.810-819
• /
• 2017

The purpose of this study is to evaluate port use and the distribution of risk factors in 15 major ports in Korea, delineating the risk of each port after classifying the ports into four risk groups based on estimated risks. The placement of response vessels is then analyzed accordingly. Based on the results, danger was estimated to be especially high in ports where large-scale petrochemical facilities are located, such as Yeosu Gwangyang ports (1.85), Ulsan port (1.33) and Daesan port (1.25). The ports showing the next highest degree of danger were Pusan (0.95) and Incheon (0.83), which have significant vessel traffic, followed by Mokpo (0.71) and Jeju (0.49), which expanded their port facilities recently and saw an increase in large vessel traffic. Next is Masan (0.44), for which many fishing permits in the vicinity. When the relative ratios of each port were graded based on the Yeosu Gwangyang Ports, which showed the highest risk values, and risk groups were classified into four levels, the highest risk groups were Yeosu Gwangyang, Ulsan, Daesan and Pusan, with Incheon, Mokpo, Jeju, and Masan following. Pyeongtaek Dangjin, Pohang, Gunsan, and Donghae Mukho were in the mid-range danger group, and the low risk groups were Samcheonpo, Okgye, and Changsungpo. Among these, all response vessel placement ports specified by current law were above the mid-range risk groups. However, we can see that ports newly included in mid-range risk group, such as Mokpo, Jeju, and Donghae Mukho, were excluded from the pollution response vessel placement system. Therefore, to prepare for marine pollution accidents these three ports should be designated as additional response vessel placement ports.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.599-606
• /
• 2019

Most facilities that manufacture products made from the hazardous materials operate at high temperatures and pressures. Therefore, there is a risk of fire explosion. In particular, an explosion accident is a major risk factor for facilities with hazardous materials, such as oil, chemical, and gas. Propylene is often used in sites producing basic raw materials and synthetic materials by addition polymerization at petrochemical plants. To prevent an explosion in the business using propylene, the explosion range with the oxygen concentration was calculated according to the changes in temperature and pressure using an inert gas, carbon dioxide. In these measurements, the temperature was $25^{\circ}C$, $100^{\circ}C$, and $200^{\circ}C$ and the amount of carbon dioxide in the container was $1.0kgf/cm^2.G$, $1.5kgf/cm^2.G$, $2.0kgf/cm^2.G$, and $2.5kgf/cm^2.G$. The explosion limit was related to temperature, pressure, and oxygen concentration. The minimum oxygen concentration for an explosion decreased with increasing temperature and pressure. The range of explosion narrowed with decreasing oxygen concentration. In addition, no explosion occurred at concentrations below the minimum oxygen concentration, even with steam and an ignition source of propylene.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.97-112
• /
• 2021

This study introduces lessons learned from investigation and analysis of major domestic and overseas cases of marine chemical incidents involving hazardous and noxious substances (HNS) during maritime transportation by chemical tankers carrying petrochemical products in bulk. The study then suggests plans to improve domestic marine HNS training curricula based on these lessons. Lessons learned from six incident cases are classified into the following six categories: 1) incident-related information, 2) safety, 3) pollution, 4) response, 5) salvage and 6) others. Based on these six categories, it is suggested that the curriculum provided by the Marine Environment Research & Training Institute for marine pollution prevention managers aboard noxious liquid substance carriers should be changed from the existing two-day training of eight subjects (16 h) to a three-day training of sixteen subjects (24 h). In addition, it is proposed that the marine chemical incident response course of the Korea Coast Guard Academy should be changed from the existing five-day training of fifteen subjects (35 h) to a six-day training of thirty-two subjects (48 h). These results are expected to contribute to sharing experiences and lessons learned about response to marine chemical incidents and to be used as basic data for improving the education and training courses for response personnel in preparedness for marine HNS incidents.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.218-226
• /
• 2022

Hydrogen, a carrier of large-capacity chemical and clean energy, is an important industrial gas widely used in the petrochemical industry and fuel cells. In particular, hydrogen is mainly produced from fossil fuels through steam reforming and gasification, and carbon dioxide is generated as a by-product. Therefore, in order to obtain high-purity hydrogen, carbon dioxide should be removed. This review focused on free-standing polymeric membranes and mixed-matrix membranes (MMMs) that separate hydrogen from carbon dioxide reported in units of Barrer [1 Barrer = 10^-10 cm³ (STP) × cm / (cm² × s × cmHg)]. By analyzing various recently reported papers, the structure, morphology, interaction, and preparation method of the membranes are discussed, and the structure-property relationship is understood to help find better membrane materials in the future. Robeson's upper bound limits for hydrogen/carbon dioxide separation were presented through reviewing the performance and characteristics of various separation membranes, and various MMMs that improve separation properties using technologies such as crosslinking, blending and heat treatment were discussed.

• Journal of Environmental Health Sciences
• /
• v.49 no.4
• /
• pp.190-200
• /
• 2023

Background: Gunsan has been constantly affected by pollutants generated by the Saemangeum development and the construction industry since the completion of the Saemangeum seawall on April 27, 2010. However, there are limitations to its study, such as taking into consideration weather conditions, geographical factors, and foreign inflows. Objectives: In this study, we compared the Existing-CAPSS emissions of Gunsan with Recalculated-CAPSS emissions data to analyze the differences in emissions characteristics by year (2016~2019). Methods: Using Existing data on CAPSS emissions (2016~2019) and Recalculated-CAPSS emissions (2016~2019) for Gunsan, which were Recalculated following the improvement of emissions calculations for 2020, we organized CO, NO_X, SO_X, PM₁₀, VOC_S, and NH₃ emissions by substance and investigated the differences and characteristics of the Recalculated emissions by year. Results: For Re-CO and Re-PM₁₀, the emission characteristics of CO were examined as energy industry combustion and PM₁₀ emission characteristics were examined as ship cargo from non-road transportation sources, as ship leisure sources were excluded from non-road transportation source emissions. Conclusions: Comparing the emissions of Existing-CAPSS and Recalculated-CAPSS in Gunsan, the emissions of Recalculated-CAPSS by substance decreased by 39.76% for CO, 9.98% for PM₁₀, 5.53% for VOC_S, and 9.24% for NH₃, while Re-NO_X increased by 2.86% and Re-SO_X increased by 1.97%. On the other hand, when comparing the emissions characteristics of Existing-CAPSS and Recalculated-CAPSS in Gunsan, Jeonju, and Iksan, the emission characteristics of Re-NO_X, Re-SO_X, Re-VOC_S and Re-NH₃ were similar to those of Ex-NO_X, Ex-SO_X, Ex-VOC_S, and Ex-NH₃. As such, Gunsan, Iksan, and Jeonju, showed differences in the comparison of different emission characteristics due to the geographical characteristics of the region (population, area, topography, weather factors) and the characteristics of the industrial complex (metal, petrochemical).