• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.15-21
• /
• 2008

This paper presented a actual conditions on a false-tripping of ELB(Earth Leakage Breakers) and an assessment of the harmonics due to non-linear electronic equipment such as personal computers, rectifier, electric furnace and test equipments in factory electrical installation. Actual conditions on a failure of ELB were surveyed and analyzed by making up a question to safety managers of factory electrical installation. Also, power quality measurements such as harmonic currents, voltage and current waveform and current imbalance were made at various factory electrical installation where nuisance tripping of ELB is often occurred. The results of this study can be used in making decisions regarding cause of ELB trip and operating and tripping characteristics test of ELB when subjected to distorted current waveform.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.2
• /
• pp.70-76
• /
• 2004

The purpose of interlocking system in railway is to prevent the route for a train being set up and its protecting signal cleared if there were already another, conflicting route set up and the protecting signal for that route cleared. Recently, conventional relays circuitry in industrial field is replaced to computer-based control systems according to the advance of computer and communication technology. Therefore, interlocking systems in railway field are rapidly changing from existing relay-based interlocking system to computer-based electronic ones that executes the vital interlocking logic to assure the safety train routes at trackside signaling equipment room using electronic circuits. So it is very important to verify the performance of developed electronic interlocking system by plentiful laboratory testing before actually application in the railway system. However the laboratory testing in the present state of railway signaling is preformed individually by manual, so very much test time and cost are required. To solve these problems, we are developed the simulator for automatic interlocking inspection in this research. This simulator is able to operate on general personal computer and has following beneficial functions : automatic test sheet generation for inspection, automatic inspection execution and et al. The experiments are executed to test the feasibility of the developed simulator the experimental results have good agreements with the anticipated ones.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.62-69
• /
• 2008

As the concerns of dermal exposure of spray painters to isocyanates in the automobile industry, glove performance was examined like permeation rate and breakthrough time including fatigue test. Methylene chloride was used as the solvent for derivatization of the isocyanates with a 97.5% recovery. Ghost wipe pads were used to wipe the surface of the glove material after chemical penetration through the glove material placed under a disposable test cell. Several solvents were tested, such as thinner(xylene, toluene) and cleaning agent(acetone) by using a standard permeation test cell(AS/NZS standard 2161. part 10.3). Solvents accelerate chemical permeation through the gloves more quickly than pure HDI hardener products. The longest breakthrough times were from Nitrosolve gloves, not detected in 8 hours, compared with others like Latex, Neoprene, TNT and Dermo Plus. Therefore Nitrosolve gloves could be recommended as personal protective equipment in crash repair shops. In addition, revised exposure limit of korean regulation should be suggested for employee to minimize the risk of health symptoms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1937-1942
• /
• 2010

In this paper, RFID technology was applied to fitness center and order to exercise the right of each user without the guidance of a personal trainer should be made systematically. for example, excercise sequence, equipment usage, excercise and golas etc. Also, Customers who use the fitness center using RFID is trainer at a low-cost under the guidance of the same effect can be expected. In this paper, Our system will record the movements of time, as well as our system can be analyze of excercise using micro processor and acceleration sensor.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.63-75
• /
• 2020

When tunnel is excavated via drilling and blasting, the excessive overbreak is the primary cause of personal or equipment safety hazards and increasing the cost of the tunnel operation owing to additional ground supports such as shotcrete. The practical management of overbreak is extremely difficult due to the complex causative mechanism of it. The study examines the relationship between rock mass characteristics (unsupported face condition, uniaxial compressive strength, face weathering and alteration, discontinuities- frequency, condition and angle between discontinuities and tunnel contour) and the depth of overbreak through using feed-forward artificial neuron networks. Then, Overbreak Resistance Factor (ORF) has been developed based on the weights of rock mass parameters to the overbreak phenomenon. Also, a new concept of tunnel overbreak management system using ORF has been suggested.

• Safety and Health at Work
• /
• v.8 no.4
• /
• pp.407-409
• /
• 2017

Air pollutants of concern include traffic-related air pollution, including particulate matter in respirable coarse and fine size fractions. There are no critical studies to date into associations between knowledge, awareness, and attitudes in using proper respiratory masks and prevalence of respiratory symptoms among urban street vendors in Thailand. In this study, we estimated adverse respiratory health outcomes among street vendors, in particular young adults, in Bangkok, Thailand, using a self-report questionnaire. Street vendors, who were not currently smoking and not having known diagnosed respiratory diseases, were recruited. They were selected from selected roadsides at Chong Nonsi, Bangkok. Participants (n = 30) reported having lower respiratory (50%), upper respiratory (37%), and other symptoms (70%). Also, 53% of participants had never used respiratory personal protective equipment (PPE: masks). Among those using PPE, all used masks not proper for particulate matter. Results suggested knowledge, awareness, and attitudes concerning proper PPE use needs to be increased among street vendors in Bangkok, Thailand.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.1
• /
• pp.40-49
• /
• 1988

The chip control problem is one of the important subjects to be studied in the metal cutting process. Especially, an important practical problem concerns the form of chips pro- duced in machining since this has important implications relative to : 1. Personal safety. 2. Possible damage to equipment and product. 3. Handling and disposal of swarf after machining. 4. Cutting forces, temperatures, and tool life. However, a dependable way to predict the form of chips in a wide range of cutting conditions has not been established satisfactorily. In this paper, the relationship between the form of chips and the ratios of cutting forces were studied experimentally. According to what the experiments have been carried out in the turning process the main results can be summarized as follows : 1. By use of the multiple linear regression model, emperical formulas which are suitable to wide ranges of cutting conditions with accuracy were obtained satisfactorily. 2. The correlations between the form of chips based upon the classification by Henriksen and the ratios of cutting forces, namely (feeding force/thrust force), (principal force/feeding force) were determined. 3. Using above results, the algorithms which predict the form of chips were constituted. With these algorithms, the form of chips in a wide range of cutting of cutting conditions can be predicted.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.371-376
• /
• 2016

Safety related workers, such as firefighters, have to wear a protective helmet. The Development of Helmets for safety is in progress to promote the wearable device industry. Several accidents caused by negligence in recent days have raised public attention to safety. For this reason, the amount of national budget funding for the study of fire-fighting and smart safety helmets has increased. However, most previous studies have focused on safety, rather than the application of new technologies based on physical attributes, especially the characteristics of head shape and size, even though fire helmets play the critical role of protection from flames and external shocks etc. in an emergency. This paper will present the smart technologies and newly developed designs for safety helmets that are personalized for each firefighter, based on the characteristics of their head, and will help a rescue operation to be much more safe and efficient.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1717-1722
• /
• 2008

A number of tools and equipment can measure the degree of stress. Stress measurement includes both psychological and physiological measurements. Considering only one of these elicits subjective or objective deficiency. Overcoming this problem requires a new stress index that combines these two measurements. Following people's personal traits, the measurement results also appear in diverse ways, but we can consider and study the general case obtained on the basis of the measurement tool. By using the index obtained by the psychological and physiological measurement tools, we obtain an integrated stress index. Therefore, we choose to use four stress measurement tools. The index of the result of each measurement tools is referred to as the multi-index. These indices are plotted on coordinates to analyze and diagnose the balance and tendency of the stress.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3319-3326
• /
• 2021

As a form of industrial control systems (ICS), nuclear instrumentation and control (I&C) systems have been digitalized increasingly. This has raised in turn cyber security concerns. Cyber security for ICS is important because cyber-attacks against ICS can cause not only equipment damage and loss of production but also personal and public safety hazards unlike in general IT environments. Numerous risk analyses have been carried out to enhance the safety of ICS and recently, many studies related to the cyber security of ICS are being conducted. Many existing risk analyses and cyber security studies have considered safety and cyber security separately. However, both safety and cyber security perspectives should be considered when analyzing risks for complex and critical ICS facilities such as nuclear power plants (NPPs). In this paper, the STPA-SafeSec methodology is selected to consider both safety and security perspectives when performing a risk analysis for NPPs in order to assess impacts on the safety by cyber-attacks against the digital I&C systems. The STPA-SafeSec methodology was applied to a test-bed system that simulates a condensate water (CD) system in an NPP. The process of the application up to the development of mitigation strategies is described in detail.