• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.135-138
• /
• 2003

The circular cavity resonator which can measure the dielectric properties of dielectrics in the V-band($50GHz{\sim}75GHz$) frequency range was designed and fabricated. Exciting and detecting of the resonator is peformed by WR15 rectangular waveguides using Bethe's small hole coupling. The GaAs plate sample was used for the verification of the performance of the fabricated circular cavity resonator. In the measurement of GaAs single crystal using that resonator, the resonant frequency of the dominant $TE_{011}$ mode, the permittivity and $Q{\times}f_0$ were measured as 53.29GHz, 12.87 and 138,000, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.18-21
• /
• 1996

SiO 7f the SiO/TiN film is used as the insulating layer and TiN film is chosen as the barrier against the diffusion of Al which is the terminal connected by ohmic contact because TiN has the advantageous properties such as good thermal stability and very low diffusion rate in spite of it\`s relatively low specific resistance. In this study we investigated it\`s electrical and optical characteristics to determine refractive index, absorption coefficient and Permittivity. The films are differently fabricated in thickness method for this experiment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.183-186
• /
• 2000

We analyzed the cross-shaped microstripline-fed slot antenna with the reflector using FDTD(Finite-Difference Time-Domain) method in this paper. The proposed antenna uses RR Duroid-5880 substrate(relative permittivity 2.2 and height(1.578 mm) of dielectrics), and compares the optimized results of other kind substrates. The maximum bandwidth of the proposed antenna is from 1.91 GHz to 5.21 GHz, which is approximately 1.437 octave for the VSWR $\leq$ 2. It was found that the bandwidth of the antenna depend highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The experimented data for the VSWR and the radiation pattern of the antenna are also represented.

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.380-385
• /
• 1996

Thin films of polyamic acid(PAA) were fabricated by vapor deposition polymerization(VDP) from pyromellitic dianhydride(PMDA) and 4,4'-diamino diphenyl ether(DDE). Thin films of polyimide(PI) were obtained by curing PAA, and their dielectric properties have been measured. The uniform thin films of PI formed by curing PAA at 300 .deg. C for 1 hr. which was confirmed by Fourier transform Infrared spectroscopy(FT-IR) absorption at 720, 1380, 1780c $m_{-1}$. Relative permittivity and tan .delta. were 3.9 and 0.008 at 10kHz, respectively. (author). 8 refs., 11 figs., 1 tab.1 tab.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1403-1407
• /
• 2004

Dielectric relaxation measurements on 3-nitrotoluene (3-NT) mixture of dimethylacetamide (DMA), dimethylformamide (DMF) and dimethysulphoxide (DMSO) have been carried out across the entire concentration range using Time domain reflectometry technique at 15, 25, 35 and $45^{\circ}C$ over the frequency range from 10 MHz to 20 GHz. For all the mixtures, only one dielectric loss peak was observed in this frequency range and the relaxation in these mixtures can be well described by a single relaxation time using Debye model. Bilinear calibration method is used to obtain complex permittivity ${\varepsilon}^{*}({\omega})$ from complex reflection coefficient ${\rho}^{*}({\omega})$ over frequency range 10 MHz to 20 GHz. The excess permittivity, excess inverse relaxation time, Kirkwood correlation factor, molar energy of activation are also calculated for these mixtures to study the solute-solvent interaction.

• 세라미스트
• /
• 제22권2호
• /
• pp.110-121
• /
• 2019

Triboelectric nanogenerators and piezoelectric nanogenerators are a spotlighted energy harvesting method that converts the wasted mechanical energy from the environment into usable electrical energy. In the case of triboelectric nanogenerators, researches have been mainly focused on high permittivity and flexible polymer materials, and in the case of piezoelectric nanogenerators, researches have been focused on ceramic materials exhibiting high polarization characteristics. Recently, many researches have been conducted to improve durability and power in various environments by using composite materials which have flexible properties of polymer, high permittivity, thermal resistance and high polarization properties of ceramics. This article reviews the energy harvesting studies reported about composites materials using ceramics and polymers.

• Advances in materials Research
• /
• 제12권1호
• /
• pp.1-13
• /
• 2023

The combination of cobalt ferrite and natural rubber has a potential to enhance the functional properties of rubber ferrite composites available on the market. In this study, cobalt ferrite was synthesized by the sol-gel method with tapioca starch as a cheating agent and then incorporated into natural rubber using an internal mixer. The curing characteristics, magnetic hysteresis, complex permeability, and permittivity of the rubber ferrite composites were studied as a function of the loading from 0 to 25 phr. The cure time and scorch time tended to reduce with the addition of non-reinforced cobalt ferrite fillers. The remanent and saturation magnetizations were linearly proportional to the cobalt ferrite loading, consistent with the rule of mixture. On the other hand, the increase in cobalt ferrite loading from 5 to 25 phr slightly affected the coercive field and the complex permeability. Using the maximum loading of 25 phr, both real and imaginary parts of the permittivity were significantly raised and reduced with the frequency in the 10-300 MHz range.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.117-120
• /
• 2008

본 논문은 차량 충돌방지 레이더의 허상방지용 전파흡수체를 유전손실재료인 $TiO_2$을 이용하여 개발하였다. 먼저 전파흡수체 샘플을 유전손실재료인 $TiO_2$ 와 바인더인 CPE를 사용하여 조성비별 제작하고, 네트워크 아날라이저를 이용하여 측정한 5-parameter로부터 1-Port Method를 이용하여 복소비유전율을 계산하였다. 그리고 계산된 복소비유전율을 이용하여 전파흡수체를 설계 및 제작한 결과 조성비 $TiO_2$:CPE=70:30 wt.%, 두께 1.85 mm, 주파수 76-77 GHz에서 20 dB 이상의 전파를 흡수하는 전파흡수체를 개발하였다.

• 한국콘텐츠학회논문지
• /
• 제4권4호
• /
• pp.171-178
• /
• 2004

라디오 주파수 마이크로파는 시료에서 포도당 농도를 측정하기 위해 사용될 수 있다. 본 논문에서는 포도당을 포함하는 증류수, 샐라인, 인체 씨럼, 인체 혈액 용액에 대해서 상대 유전율을 측정함으로써 포도당 농도 측정의 예비 실험 결과를 보고한다. 근육과 같은 인체 조직의 포도당 농도 측정에서 마이크로파 방법은 NIR방법보다 투과 깊이가 약 100배 더 컸으며, 이것은 인체의 포도당을 비침습적인 검출에 더 유용한 장점이 된다. 실험에서 인체 혈액 용액에서 포도당 농도를 검출하기 위한 측정 감도는 5.8GHz부근에서 약 57mg/dl를 보였다.

• 대한전자공학회논문지
• /
• 제26권7호
• /
• pp.13-20
• /
• 1989

주파수에 따른 유효 유전율의 변화를 기존의 설계식에 첨가함으로써 C-ban와 X-band 이상의 넓은 주파수 범위에서도 적용할 수 있는 정방형 마이크로스트립 패치 안테나의 설계 방식을 제안하였다. 제안된 설계 방식을 이용하여 동일한 두께와 유전율을 갖는 마이크로웨이브 기판위에 7개의 안테나를 각 주파수별로 제작하여 실험함으로써 기존의 설계식들이 갖는 부정확성을 극복할 수 있음을 확인하였다. 7GHz에서 15GHz에 이르는 주파수 범위에서 실험한 결과 공진주파수는 예측한 주파수에서 오차가 ${\pm}1%$ 이내인 범위에 들어옴을 알 수 있었으며, 또한 제작한 안테나의 방사패턴도 이론값과 거의 일치하였다.