• 한국정보과학회논문지:시스템및이론
• /
• 제29권4호
• /
• pp.176-184
• /
• 2002

본 논문은 고신뢰 실시간 시스템에 체크포인팅을 적용할 수 있도록 실시간성과 신뢰성을 모두 고려하는 체크포인팅 프레임워크를 제공한다. 실시간 태스크의 시간 예측성은 할당된 체크포인트의 수와 태스크가 실행 중에 감내 해야하는 고장의 수를 기반으로 태스크의 최악 실행 시간(WCET: Worst Case Execution Time)을 산출함으로써 보장된다. 태스크가 실행 중에 극복해야하는 고장의 수는 태스크의 신뢰성 요구조건을 기반으로 산출됨으로써 태스크의 신뢰성이 보장되도록 한다. 이렇게 얻어진 태스크들의 WCET와 태스크가 극복해야 하는 고장의 수를 이용하여, 각 태스크의 스케줄 가능성을 보장하기 위해 요구되는 최소의 체크포인트 수를 유도하는 알고리즘을 제안한다. 본 논문에서 제안하는 프레임워크는 체크포인팅의 시간 중복량을 기반으로 하므로, 다른 시간 중복 기법에 대해서도 확장이 용이하다.

• Journal of Korean Neurosurgical Society
• /
• 제62권4호
• /
• pp.414-421
• /
• 2019

Objective : To evaluate 3-dimensional magnetic resonance imaging (MRI) of Kambin's safe zone to calculate maximum cannula diameter permissible for safe percutaneous endoscopic lumbar discectomy. Methods : Fifty 3D MRIs of 19 males and 31 females (mean, 47 years) were analysed. Oblique, axial and sagittal views were used for image analysis. Three authors calculated the inscribed circle (cannula diameter) individually, within the neural (original) and bony Kambin's triangle in oblique views, disc heights on sagittal views and root to facet distances at upper and lower end plate levels on axial views and their averages were taken. Results : The mean root to facet distances at upper end plate level measured on axial sections increased from $3.42{\pm}3.01mm$ at L12 level to $4.57{\pm}2.49mm$ at L5S1 level. The mean root to facet distances at lower end plate level measured on axial sections also increased from $6.07{\pm}1.13mm$ at L12 level to $12.9{\pm}2.83mm$ at L5S1 level. Mean maximum cannula diameter permissible through the neural Kambin's triangle increased from $5.67{\pm}1.38mm$ at L12 level to $9.7{\pm}3.82mm$ at L5S1 level. The mean maximum cannula diameter permissible through the bony Kambin's triangle also increased from $4.03{\pm}1.08mm$ at L12 level to $6.11{\pm}1mm$ at L5S1 level. Only 2% of the 427 bony Kambin's triangles could accommodate a cannula diameter of 8mm. The base of the bony Kambin's triangle taken in oblique view (3D MRI) was significantly higher than the root to facet distance at lower end plate level taken in axial view. Conclusion : The largest mean diameter of endoscopic cannula passable through "bony" Kambin's triangle was distinctively smaller than the largest mean diameter of endoscopic cannula passable through "neural" Kambin's triangle at all levels. Although proximity of exiting root to the facet joint is always taken into consideration before PELD procedure, our 3D MRI based anatomical study is the first to provide actual maximum cannula dimensions permissible in this region.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.511-520
• /
• 2003

In room acoustics, reverberation time is an important acoustic parameter. However it is often difficult to measure short reverberation times at low frequencies with a traditional band pass filter bank if the product of filter bandwidth (B) and reverberation time (T) is small. It it well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, in the previous paper, the wavelet filter bank was developed and the minimum permissible product of bandwidth and reverberation time was replaced with 4. In the present paper it is demonstrated how the short reverberation times of an practical room at low frequencies are successfully measured by using the wavelet filter bank and the results are compared with the traditional method using a band past filer bank.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.214-217
• /
• 2005

To improve the safety of facilities and human beings when the ground fault occurs, public power utility prescribes the reasonable ground resistances, measures and controls the ground resistance of all the ground electrodes biennially. Concerning the safety of human, there are two safety criteria widely accepted, i.e. the IEEE Std 80-2000 and the IEC 479-1:1994. The IEEE Std 80-2000 is based on a simplified electric shock model usually translated into permissible touch and step voltages. The IEC 479-1:1994 is less specific than IEEE Std 80-2000 for analysis purpose. The IEC 479-1:1994 provides values of permissible body current against electric shock duration. This paper provides a technical study of these two standards to analyze the safety of human beings of ground electrodes developed recently for distribution power system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.204-205
• /
• 2014

Among common test methods of assessing structure safety for existing lightweight walls, the criteria of the quality assessment of the horizontal static load resistance has been considered ambiguous. In the current study, therefore, an experiment was conducted to figure out the standardized assessment criteria of the lightweight wall's horizontal static load resistance. Based on the findings of the experiment with gypsum board and ALC block walls, an acceptable amount of each standard and the variables of the stud wall arising from the appropriate load (1000N) on the wall in a daily life were accounted for, arbitrarily setting the maximum deformation amount below 15mm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.467-469
• /
• 2004

When power cables cross regions with unfavorable thermal conditions, conductor temperatures higher than the design value can occur. This paper proposes the calculation algorithms of the permissible current-carrying capability using the algorithm of calculating the longitudinal conductor temperature distribution of power cables installed in thermally dissimilar soil materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.470-472
• /
• 2004

This paper proposes a method of increasing the Permissible current carrying capability of underground power cables. A clue of this method is driven from the temperature distribution analysis processes according to the currents calculated from unequally mode algorithm in ampacity program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.256-258
• /
• 2002

This paper analyzes the sensitivity of the permissible current-carrying capability of underground power cables according to the thermal property of backfill materials and construction size of backfill materials. It is helpful for operators to determine the operating current and to design the construction of underground power cables.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.1.1-2
• /
• 2002

Ultimate objective of industrial hygiene is the prevention of health impairment that may result from exposure to chemicals at workplaces. This implies the definition of permissible levels of exposure, that is, levels that according to the present status of knowledge are estimated to cause no adverse health effects during the lifetime of the workers, and the regular assessment of the possible health risk associated with exposure by comparing the current or the integrated exposure with the permissible exposure limits. Workers in solvent thinner-using occupation environment might be highly exposed to VOCs(volatile organic compounds) because solvent thinner has been used extensively such as painting, spraying, degreasing, coating and so on in Korea. The purpose of this study was to recognize, evaluate and propose the alternative control the VOCs from solvent thinner-using workplace.

• Toxicological Research
• /
• 제18권2호
• /
• pp.191-194
• /
• 2002

3-Monochloro-1,2-propanediol(3-MCPD) was analyzed in soy sauce products commercially available in Korea. A total of 24 samples were collected and 3-MCPD was determined by GC/MS. Sources of 24 samples were classified by manufacturing methods as naturally brewed(NB), acid hydrolyzed (AH) and mixed (M = NB + AH) soy sauces. 3-MCPD was not detected in NB soy sauce products (< 0.01 ppm, mg/kg) whereas AH and M soy sauce products showed a wide range of 3-MCPD contamination (0.0l ∼ 2.038 ppm). The contaminated levels of 3-MCPD in soy sauce products were higher than the permissible or tentative permissible level of 3-MCPD in both European Community (0.02 ppm) and Korea (0.3 ppm). These data suggest that 3-MCPD levels contaminated in soy sauce products in Korea were shown to be too high and should be reduced to as low a level technologically feasible to protect Korean from the exposure to toxic chemical, 3-MCPD.