• 대한전자공학회논문지TC
• /
• 제44권11호
• /
• pp.54-59
• /
• 2007

본 논문에서는 varactor-loaded split-ring resonator (VLSRR)를 기반으로 한 가변 metamaterial 전송 선로를 이용한 광대역 전압 제어 발진기를 제안하였다. 우선, 마이크로스트립 라인에 결합된 VLSRR이 주파수 조절 특성을 갖는 metamaterial 전송선로를 만들 수 있음을 증명하였다. 음의 유효 투자율은 VLSRR에 의해 공진 주파수 상에서 협대역으로 얻어지는데, 버랙터 다이오드들의 연결을 통해 주파수가 조절될 수 있다. 1.8 V의 공급 전압을 갖는 전압 제어 발진기는 주파수 조절 범위 $5.407\;{\sim}\;5.84\;GHz$에서 $-108.84\;{\sim}\;-105.5\;dBc/Hz$ @ 100 kHz의 위상 잡음 특성을 얻는다. Power-frequency-tuning-normalized (PFTN)이라고 불리우는 figure of merit (FOM)은 20.144 dB이다.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.239-246
• /
• 1998

폴리이미드 고분자막을 사용한 질소부하 장치를 설계하고, 이를 CA 저장에 활용하기 위한 기술적 기본 데이터를 제시하였다. 순수 산소 및 질소의 투과특성은 dual-mode sorption 모델로서 설명될 수 있었으며, 공기 중의 산소의 투과율은 공기 중에 존재하는 질소의 영향으로 순수 산소의 투과율에 비해 크게 감소하나, 공기 중의 질소의 투과율은 산소의 영향으로 순수 질소의 투과율에 비해 증가하였다. 수행한 압력 및 온도 범위 내에서 이상분리인자는 5에서 6 사이의 값을 나타내었으며, 공기의 분리인자는 이상분리인자보다 작은 값을 나타내었다. 산소의 투과활성화에너지가 질소의 투과 활성화에너지보다 커서 이상분리인자는 온도가 증가함에 따라 증가하였다. 제품회수율이 증가함에 따라 농축부의 질소농도는 급격히 감소하였으며, 이로부터 제품회수율은 CA 저장고에서 요구되는 질소농도를 얻기 위한 주요 조업인자임을 알 수 있었다. Polyimide 막 시스템을 이용한 CA 저장 공정의 가상적인 모형을 설정하고, 시스템의 조업시간에 따른 저장고의 질소농도를 예측할 수 있는 관계식을 제시하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 춘계 총회 및 학술발표회
• /
• pp.55-56
• /
• 1996

Heterophase polymer system has been attractive for a potential applicability to gas separation membrane material. It has been known that there is a trade-off between gas permeability and its selectivity in common polymers. Therefore, the heterophase polymer can be an alternative for a gas separation membrane material because its transport properties can be readily controlled by blending of two different polymers. The transport properties of immiscible polymer blends strongly depend upon the intrinsic transport properties of corresponding polymers. Another important factor to determine the transport properties is their morphology: volume fraction, size and shape of dispersed phase. Although the effect of the volume fraction of the dispersed phase on the transport properties has been widely investigated, the size and shape effects have been paid attention very much. In an immiscible polymer blend of two polymers, its morphology is primarily controlled by its volume fraction of dispersed phase. Therefore, the effect of the size of the dispersed phase can be hardly seen. Therefore, a block copolymer has been commonly employed to control their morphology when each block is miscible with one or the other phase. In this work, gas transport properties will be measured by varying the morphology of the heterophase polymer membrane. The transport properties will be interpreted in terms of their morphology. The effect of the volume fraction of the PI phase and, in particular, its size effect will be investigated experimentally and theoretically.

• 콘크리트학회논문집
• /
• 제12권1호
• /
• pp.113-125
• /
• 2000

The purpose of this study was to examine the durability characteristics of controlled low strength material(flowable fill) with high volume fly ash content. Flowable fill refer to self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. The two primary advantages of flowable fill over traditional methods are its ease of placement and the elimination of settlement. Therefore, in difficult compaction areas or areas where settlement is a concern, flowable fill should be considered. The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. The mix proportions used for flowable fill are selected to obtain low-strength materials in the 10 to 15kgf/$\textrm{cm}^2$ range. The optimized flowable fill was consisted of 60kg f/$\textrm{m}^3$ cement content, 280kgf/$\textrm{m}^3$ fly ash content, 1400kgf/$\textrm{m}^3$ sand content, and 320kgf/$\textrm{m}^3$ water content. Subsequently, durability tests including permeability, warm water immersion, repeated wetting & drying, freezing & thawing for high volume fly ash-flowable fill are conducted. The results indicated that flowable fill has acceptable durability characteristics.

• 한국항해학회지
• /
• 제19권2호
• /
• pp.107-113
• /
• 1995

Since the most of the mal-functions in the industrial equipments controlled by processors have been occured by the Electrical Fast Transient(EFT), the International Electrotechnical Commision(IEC) prepare the dummy signal to test the immunity level of the equipments controlled by processors and recommend it for the measuring. In this paper, the defined dummy EFT signal by IEC are analyzed by the spectrum analyzer in the frequency domain and studied the developed countermeasuring parts. The new developed parts are consist of the feedthrough capacitors ( $C_y$ type ) in the input and materials with high permeaility which was wound or inserted in the second layer of the Power Cable in order to increase Common Mode inductance. And it is compared inserted Permalloy to material with high permeability increasing Common Mode inductance. We could gotten a excellent insertion loss on the wide band against EFT signal. Especially, we confirm that countermeasuring Power Cable have been an excellent dynamic characteristics in computer system above the 3.6Kv. This new parts could be effectively used for industrial, MIL, and medical equipments to reduce a mal-functions on the site. Furthermore, these parts also have a good characteristics for EMI countermeasuring over the 60MHz up to several GHz band, they are also expected to be used for all kind of EMS test with IEC801-2, 3, 5 and 6 on the power distributed line.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2005년도 춘계 학술발표회 논문집
• /
• pp.148-151
• /
• 2005

Field-scale DNAPL dissolution is controlled by the topology of DNAPL distributions with respect to the velocity field. A high resolution percolation model was developed and employed to simulate the distribution of DNAPL within source zones. Statistically anisotropic permeability values and capillary parameters were generated for 10${\times}$10${\times}$10 m domains at a resolution of 0.05 to 0.1 m for various statistical properties. TCE leakage was simulated at various rates and the distribution of residual DNAPL in 'fingers' and 'lenses' was computed. Variations in finger and lens geometries, frequencies, average DNAPL saturations, and overall source topology were predicted to be strongly influenced by statistical properties of the medium as well as by injection rate and fluid properties. Model results were found to be consistent with observations from controlled DNAPL release experiments reported in the literature. The computed distributions of aquifer properties and DNAPL were utilized to perform high-resolution numerical simulations of groundwater flow and dissolved transport. Simulations were performed to assess the effect of grout or foam injection in bore holes within the source zone and of shallow point-releases of fluids with various properties on dissolution in DNAPL dissolution rate, even for widely spaced injection points. The results indicate that measures that induced partial flow reductions through DNAPL source zones can significantly decrease dissolution rates from residual DNAPL. The benefit from induced partial flow reductions is two-fold: 1) local flow reduction in DNAPL contaminated zones reduces mass transfer rates, and 2) contaminant flux reductions occur due to the decrease in groundwater velocity

• 한국지반공학회논문집
• /
• 제15권2호
• /
• pp.43-71
• /
• 1999

본 연구는 하수처리장 슬러지를 사용하여 매립지의 복토재 및 차수재의 건설재료로 개발하기 위하여 수행한 실험의 분석결과이다. 하수슬러지에 그의 지반공학적 물성증진을 위하여 화강토와 화력발전소의 부산물인 플라이애쉬를 주첨가물로 사용하고 부첨가물로 시멘트 및 벤토나이트를 소정의 혼합비율로 섞어서 각각 전단강도 증진과 투수계수 감소효과를 도모하였다. 주재료인 하수슬러지와 첨가재의 혼합비율을 변화시킨 혼합물에 대하여 다양한 실내실험을 수행하여 복토재 및 차수재의 설계기준의 적합성 여부를 조사하였다. 각 주재료, 첨가재, 혼합물의 비중, 입도분석, 액\ulcorner소성한계 실험을 실시하여 기본물성을 구하고 그들이 투수성, 다짐성, 압축성, 전단강도에 미치는 영향에 대하여 분석하였다. 혼합물에 대하여 실내다짐시험을 실시하여 최대건조단위중량과 최적함수비를 구하고 현장 다짐효율성을 평가하였다. 다짐혼합시료에 대하여 변수두 투수시험을 실시하여 투수계수를 구하는 한편 변수두 투수시험을 하중제어식 압밀시험중에 병행 실시하여 그들의 압밀정수 및 투수계수를 측정하였다. 슬러지의 장기적 안정성과 관련하여 크리프실험을 변수두 투수시험과 함께 실시하였다. 한편, 한달간을 부패시킨 다짐시료에 대하여 투수시험을 실시하여 슬러지내 유기물질 부패에 의한 투수계수에 미치는 영향에 대하여 고찰하였다. 슬러지에 화강토, 플라이애쉬, 벤토나이트를 일정비율로 섞은 혼합물에 대하여 직접전단시험을 실시하여 전단강도정수를 구하였다. 시멘트와 혼합한 슬러지에 대하여 일축압축 강도시험을 실시하여 혼합비와 재령기간에 따른 압축강도 변화를 분석하였다. 한편, 다짐혼합시료에 대하여 CBR시험을 수행하여 그들의 주행성에 대한 평가를 실시하였다. 이와 같은 다양한 실험결과를 종합분석하여 매립지의 차수재 및 복토재로서 사용조건 만족여부를 검토하였다.

• 한국전산구조공학회논문집
• /
• 제28권6호
• /
• pp.691-697
• /
• 2015

본 논문에서는 PSC 거더 내부 긴장재의 Prestress 변화를 계측하고, 그 손실을 관리하기 위하여 PSC 거더 내부에 매립이 가능한 매립형 EM 센서를 연구 및 제작하였다. 현재까지의 PSC 내부 긴장재의 긴장력 손실관리는 시공 시 설계 긴장력 도입 여부 검증에 머물러 있으며, 시공 후에는 관리가 제대로 이루어지고 있지 않다. 이에 본 논문에서는 강자성체에 자기장이 작용하면 비투자율인 강자성체 고유의 특성이 변화한다는 탄성-자기 이론을 기초로, PSC 거더의 정착구와 쉬스관 외관의 특성을 반영하여 PSC 거더 내부에 매립이 가능한 매립형 EM 센서를 설계하여 제작하였다. 제작 후에는 그 성능을 검증하기 위하여 소형 PSC 거더 모형에 제작된 매립형 EM 센서를 설치한 후 콘크리트를 타설하였다. 양생이 종료된 후 7가닥의 PS 텐던을 삽입한 후 텐던에 200, 710, 1070, 1300kN의 긴장력을 도입하면서 매립형 EM센서를 통해 비투자율의 변화를 계측하였다. 계측 결과 도입한 긴장력이 커질수록 PS 텐던의 비투자율이 낮아지는 변화가 있음을 확인하였으며, 도입 긴장력에 따른 투자율이 도입 긴장력을 충분히 추정할 수 있음을 확인하였다. 따라서 본 연구에서 제안한 매립형 EM 센서는 PSC 교량 내부로 매립이 가능함을 확인하였으며 매립형 EM 센서를 통한 비투자율 변화 계측을 통하여 PS 텐던의 긴장력 변화를 추정할 수 있음을 확인하였다.

• KSBB Journal
• /
• 제31권2호
• /
• pp.120-125
• /
• 2016

Two-dimensional cultivation is typically used for cell growth, but the method reduces the characteristics of chondrocytes and stem cells, and limits culture area. Therefore, development of three-dimensional culture method is needed to mimic in vivo environment, improve quality of cells and scale-up efficiently. Improving proliferation and chondrogenesis is available by co-culture of chondrocytes and mesenchymal stem cells (MSCs) that leads to interaction between two kinds of cells. However, the co-culture has problems that permeability of sphere diminishes as aggregate size increased and ratio of two kinds of cells composing each spheres is different. In this work, co-cultivation method using controlled sphere composed of chondrocytes and MSCs was established and enhanced chondrogenesis. Periosteum-derived progenitor cells (PDPCs) that are appropriate for cell therapy source of articular cartilage were used as MSCs. Controlled spheres were formed in the hanging-drop plates and shifted for being induced chondrogenesis in 35-mm non-adhesive culture dishes at a rotation rate of 60 rpm. After inducing chondrogenesis, gene expressions related with chondrogenesis were found to be improved and it was apparent that the utilization of controlled spheres promoted chondrogenesis. As a result, available numbers of cells per unit area were increased and chondrogenic differentiation ability was improved compared to typical two-dimensional culture. This approach shows the potential in cartilage regeneration as it can provide sufficient numbers of chondrocytes.

• 한국의류학회지
• /
• 제11권1호
• /
• pp.21-28
• /
• 1987

Since the air permeabilities are closely connected with clothing hygiene, air permeabilities required to optimize dressing were studied and measured the air permeabilities that take air layers among fabrics into account. The thickness of air layers were controlled from 3mm to 24mm, and the numbers of air layers were made from one layer to three layers. The samples used were selected in casual wears in spring and autumn. The results obtained are as follows; 1. Specific air permeabilities of superimposed fabrics decreased gradually according to the increase of superimposed number. 2. Specific air permeabilities of the same kind of fabrics increased at first and later decreased by the increase of intervals when the fabrics are superimposed at regular intervals, and those of the different kind of fabrics decreased. 3. Specific air permeabilities of the different kind of fabrics decreased to the 18mm of total thickness in air layers and increased later.