• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.517-524
• /
• 2004

Two simple and sensitive spectrophotometric methods were developed for the determination of carbocisteine, penicillamine, ethionamide and thioctic acid in bulk and in their pharmaceutical preparations using alkaline potassium permanganate as an oxidizing agent. The first one involves determination of ethionamide and thioctic acid by spectrophotometric investigation of the oxidation reaction of the two drugs. The second method involves determination of carbocisteine and penicillamine by kinetic studies of the oxidation reaction of these two drugs at room temperature for a fixed time of 20 minutes. The absorbance of the colored manganate ions was measured at 610 nm in both methods. 1-10 ${\mu}$g/mL of ethionamide and thioctic acid could be etermined by the spectrophotometric method with detection limits of 0.11 and 0.089 ${\mu}$g/mL for the two drugs respectively. 2-10 ${\mu}$g/mL of carbocisteine and penicillamine could be determined by the kinetic method with detection limits of 0.14 and 0.21 ${\mu}$g/mL respectively. The two methods were successfully applied for the determination of these drugs in their dosage forms.

• Journal of Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.157-161
• /
• 2006

The performance of abiotic degradation of oxadiazon was investigated by applying zerovalent iron(ZVI), potassium permanganate($KMnO_4$) and titanium dioxide($TiO_2$) in the contaminated water. Experimental conditions allowed the disappearance of oxadiazon in the abiotic system. The degradation of this herbicide was monitored in buffer solutions having pH 3, 5 and 7 in the presence of iron powder in which the maximum degradation rate was achieved at acidic condition(pH 3) by 2% of ZVI treatment. The oxidative degradation of oxadiazon was observed in aqueous solution by $KMnO_4$ at pH 3, 7 and 10 in which the highest disappearance rate was found at neutral pH when treated with 2% of $KMnO_4$. The catalytic degradation of oxadiazon in $TiO_2$ suspension was obtained under dark and UV irradiation conditions. UV irradiation enhanced the degradation of oxadiazon in aquatic system in the presence of $TiO_2$. Conclusively, the remediation strategy using these abiotic reagents could be applied to remove oxadiazon from the contaminated water.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.3
• /
• pp.172-178
• /
• 2018

In this paper, effects of potassium permanganate, pottasium dichromate, sodium molybdate on lean duplex stainless steel were studied by GDOES, OCP, potentiodynamic curves. The stainless steels were chemically passivated in each nitric acid solutions containing 4wt.% oxidants for 1 hour. As a result, when potassium dichromate or sodium molybdate was added, content of Fe was decreased and content of Cr was increased. Consequently, corrosion resistance of passive film was increased. But in case of potassium permanganate was added, contrastively, content of Fe was increased and content of Cr was decreased. So corrosion resistance was decreased. Adding sodium molybdate in nitric acid for chemical surface treatment process was the most effective among oxidants and also it showed the most stable anti-corrosion in SST.

• Corrosion Science and Technology
• /
• v.17 no.1
• /
• pp.30-36
• /
• 2018

The high rate of corrosion of magnesium alloys makes it limited for industrial applications. Therefore, surface treatment is required to enhance their corrosion resistance. In our study, a chemical conversion coating for protecting the corrosion of the magnesium alloy, AZ31B, was prepared by using a phosphate-permanganate solution. The chemical conversion coating had a limited protection ability due to defects arising from cracks and pores in the coating layer. The sol-gel coating was prepared by using trimethoxymethylsilane (MTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) as precursors, and aluminum acetyl acetonate as a ring opening agent. The corrosion protection properties of sol-gel and conversion coatings in 0.35wt% NaCl solution were measured by the electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization test. The EIS results indicated that the resistance of the chemical conversion coating with the sol-gel coating was significantly improved through the sol-gel sealed phosphate-permanganate conversion coating. The results of the potentiodynamic polarization test revealed that the sol-gel coating decreased the corrosion current density ($I_{corr}$). The SEM image showed that the sol-gel coating sealed conversion coating and improved corrosion protection.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.2
• /
• pp.44-49
• /
• 2011

The films formed on AZ31B magnesium alloy were prepared from alkaline solution composed of potassium permanganate and sodium hydroxide. The immersion tests were carried out at the different concentration of sodium hydroxide and pre-treatment method in 5 minute. The morphology and the phase composition of the film were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The corrosion behavior of the film in 5.0% NaCl solution was evaluated using potentiodyanmic polarization. Open circuit potential in developing film was examined with time. The thin and transparent film was mainly composed of MgO and $Mg(OH)_2$. The film with the best corrosion resistance was obtained at $70^{\circ}C$ bath temperature, 1.6 M concentration of sodium hydroxide and chemical pre-treatment.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.73-79
• /
• 2010

A chromium-free conversion coating for AZ31 magnesium alloy has been obtained by using a permanganatephosphate solution, which has been developed with acid pickling. Examination have been carried out on the conversion coatings for morphology, composition and corrosion resistance. The morphology of the conversion-coated layer was observed using optical microscope and SEM. It was shown that the conversion coatings are relatively uniform and continuous, with thickness 1.8 to 2.7 ${\mu}m$. The chemical composition of conversion coating was mainly consisted of Mg, O, P, K, Al and Mn by EDS analysis. It was found that the corrosion resistance of the AZ31 magnesium alloy has been improved by the permanganate-phosphate conversion treatment from electrochemical polarization.

• Korean Journal of Metals and Materials
• /
• v.48 no.8
• /
• pp.724-729
• /
• 2010

The effect of potassium permanganate ($KMnO_4$) in an electrolyte on the corrosion performance of magnesium alloy coated by micro-arc oxidation (MAO) has been investigated in this study. For this purpose, MAO coating was carried out on the present sample under AC condition in an alkaline silicate electrolyte with and without $KMnO_4$. Irrespective of the addition of $KMnO_4$, it was found from structural observation that the ceramic coating layers consisted of inner and outer layers. In the sample processed in the electrolyte with $KMnO_4$, the outer layer became dense and even contained a number of $Mn_2O_3$ atoms, resulting in high corrosion resistance. Based on the results of a potentiodynamic polarization test, it was confirmed that the coating layer formed in the electrolyte with $KMnO_4$exhibited better corrosion resistance than that without $KMnO_4$. The high corrosion resistance of the MAO-treated magnesium alloy was explained in relation to the equivalent circuit model.

• Journal of Environmental Science International
• /
• v.23 no.2
• /
• pp.181-192
• /
• 2014

In Korea, the chemical oxygen demand($COD_{sed}$) in freshwater sediments has been measured by the potassium permanganate method used for marine sediment because of the absence of authorized analytical method. However, this method has not been fully verified for the freshwater sediment. Therefore, the use or modification of the potassium permanganate method or the development of the new $COD_{sed}$ analytical method may be necessary. In this study, two modified $COD_{sed}$ analytical methods such as the modified potassium permanganate method for $COD_{Mn}$ and the modified closed reflux method using potassium dichromate for $COD_{Cr}$ were compared. In the preliminary experiment to estimate the capability of the two oxidants for glucose oxidation, $COD_{Mn}$ and $COD_{Cr}$ were about 70% and 100% of theoretical oxygen demand(ThOD), respectively, indicating that $COD_{Cr}$ was very close to the ThOD. The effective titration ranges in $COD_{Mn}$ and $COD_{Cr}$ were 3.2 to 7.5 mL and 1.0 to 5.0 mL for glucose, 4.3 to 7.5 mL and 1.4 to 4.3 mL for lake sediment, and 2.5 to 5.8 mL and 3.6 to 4.5 mL for river sediment, respectively, within 10% errors. For estimating $COD_{sed}$ recovery(%) in glucose-spiked sediment after aging for 1 day, the mass balances of the $COD_{Mn}$ and $COD_{Cr}$ among glucose, sediments and glucose-spiked sediments were compared. The recoveries of $COD_{Mn}$ and $COD_{Cr}$ were 78% and 78% in glucose-spiked river sediments, 91% and 86% in glucose-spiked lake sediments, 97% and 104% in glucose-spiked sand, and 134% and 107% in glucose-spiked clay, respectively. In conclusion, both methods have high confidence levels in terms of analytical methodology but show significant different $COD_{sed}$ concentrations due to difference in the oxidation powers of the oxidants.

• Journal of fish pathology
• /
• v.18 no.2
• /
• pp.179-185
• /
• 2005

In Vitro hemolysis and methemoglobin (MetHb) formation in olive flounder rythrocytes were investigated using potassium permanganate ($KMnO_4$) ranging from 2 to 250 ppm, stabilized chlorine dioxide ($S-ClO_2$)ranging from 3.13 to 400 ppm, formalin (37% formaldehyde) ranging from 31.3 to 2,000 ppm and copper sulphate ($CuSO_4$) ranging from 0.04 to 5 ppm. Remarkable hemolysis was found to be induced at $KMnO_4$ concentrations of 31.3-250 ppm and $CuSO_4$ concentrations of 0.63-5 ppm. On the other hand, MetHb formation could not be found at the same treatment concentrations. It is suggested that the cell-damaging system of $KMnO_4$ may be similar from that of $CuSO_4$ in the erythrocytes of olive flounder. Remarkable hemolysis and MetHb formation were found to be induced at $S-ClO_4$ concentrations of more than 25 ppm and 6.25 ppm, respectively. Only $S-ClO_2$ showed both hemolysis and MetHb formation among the chemicals used in the present study. Formalin did not provoke hemolysis at the highest concentration of 2,000 ppm but induced MetHb formation at ranging from 250 to 2,000 ppm. These findings reveal that the mechanism involved in formalin-induced cell-damaging effects differs from that induced by $S-ClO_2$ to olive flounder erythrocytes compared with $KMnO_4$ and $CuSO_4$.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.569-574
• /
• 1995

In-situ spectroelectrochemical studies have been carried out on the oxidation of Mn(II) at platinum, gold, lead dioxide, and bismuth doped lead dioxide electrodes. The Mn(III), $MnO_2$, and/or ${MnO_4}^-$ species are produced depending on experimental conditions employed during electrolysis. Mn(III) is shown to be produced from a very early stage during the anodic potential scan and undergo disproportionation-conproportionation reactions depending on the relative concentration of each species near the electrode surface. An oxidation mechanism consistent with these observations is proposed.