• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.3
• /
• pp.69-76
• /
• 2018

General workers who assist various technicians in different fields with their work across the whole construction sites without having a particular skill are at risk of the highest accident rate and their accident form becomes varied. Accordingly, this study was conducted to identify the relationship between form of safety accident and influence factor in general workers and analyze accident severity by influence factor. The followings are the results from this study. First, as a result of analyzing major form of accident and influence factors in general workers with network analysis methodology, nine forms of accident and seventeen influence factors were drawn. Second, it was found that in accident severity among general workers, collapsing, among various forms of accident, appeared the highest, followed by fall, electric shock, fire, hit by an object, bumped against, trip, scission getting cut chopped in order. Third, main points of special, concentrated, and permanent management were presented in order to reduce the safety accident in general workers effectively.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.920-922
• /
• 2002

This paper investigates the cogging torque reduction in a brushless DC(BLDC) motor having an inner-rotor with surface-mounted segment-type permanent magnets. The kind of magnets for the BLDC motor could have different waveforms of magnetization such as square, trapezoidal and sinusoidal form. This paper discusses the effect of the unsymmetrical magnetization distribution in the segment-type permanent magnet, which is able to obtain through a segment structure that the number of poles per segments is 2 ($N_p/N_s$), on the cogging torque and EMF waveform. Where the existing magnetizer fixture for the square-type magnetization is used to magnetize the magnets in two segment structures of $N_p/N_s$ = 1 and 2. The effectiveness of the proposed designs had been confirmed by comparing cogging torque, and EMF waveform between conventional and new models which are analyzed by Finite Element Method (FEM).

• KIEAE Journal
• /
• v.12 no.5
• /
• pp.35-42
• /
• 2012

The rental housing has been a main role to supply a living space to the household who can not be available for the home-owner. Specially, the public rental housing is targeted for the low-income household and supplied with low rental fee. Therefore, the rent owner should manage and maintain the housing condition decently with a systematically maintenance plan which includes a repair time and scope, a repair cost. Among them, the repair time is important to make a repair plan. The repair time would be explained with two types, which is divided into a breakdown maintenance and a preventive maintenance. Each of them has a advantage in a repair cost, maintenance of the living condition and provision of the repair scope and method. In this paper, it aimed at providing the repair time in 12 components of the public rental housing which is reflected from a preventive maintenance. This study shows that overall, a permanent rental housing has a longer repair time than any other rental housing in 12 housing components. A public rental housing is closer to the a permanent rental housing then a redevelopment rental housing in repair time. On the other hand, the repair time of the 12 housing components is different form the rental housing. This leads to further study in difference of the repair time according to a tenant type.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.164-172
• /
• 2004

This paper presents the comparison results of some kinds of control method in circumstance of eccentric load. The plant to be controlled is a computed tomography(CT) driven by a permanent magnet synchronous motor. In a CT system, many units are attached on the rotationally part of a gantry such as x-ray tube, detector, heat exchanger, and data acquisition unit etc. Therefore keeping many components to balance which have different weight is not easy; this is inescapable problem in the all CT systems. To solve this problem against eccentric load, some kinds of control method have been compared and analysed by using protype CT. From the experimental results it is vilified that the CT drive system with model reference control method indicates higher speed regulation ability regardless of variable eccentric weight and uncertain position, and also in the limit condition of constant eccentric weight and fixed position, the compensation method with sinusoidal form is a strong candidate in view of speed ripple reduction.

• The Journal of the Korean dental association
• /
• v.10 no.3
• /
• pp.155-158
• /
• 1972

As a factor of dentistry, the form of the tooth especially the size plays an important part. And in orthodontics the relation between the tooth size, arch length and the basal arch is regarded important, and it is closely related to the extraction and retension probolem in treatment planning. The auther's study of the mesio-distal crown diameters of permanent teeth, width and length of the dental arch and basal arch from the cast of 50 men and 53 women who could be measured clerly, among 102 men and 107 women regarded as the normal occlusion showed the followings. 1. Table 1 and table 2 showed the measurement of the mesio-distal maximum width of the permanent teeth, width and length of the dental arch and basal arch of the upper and lower dentitions. 2. Men's mesio-distal width of the teeth, arch length and arch width of the upper and the lower dentition, basal arch width and basal arch length are larger than those of wonen's 3. We compared the Koreans with the American white. Upper central incisors, upper first molars and lower second premolars of the latter were larger than those of the former. And the Koreans's rest tooth of the rest were comparatively larger.

• The Journal of the Korean dental association
• /
• v.15 no.8
• /
• pp.617-621
• /
• 1977

In order to comparatively observe the salivary cariogenic factors contributing to permanent tooth caries development in each sexes of Korean, the author performed estimation of unstimulated and stimulated salivary flow rates, salivary viscosity test, and salivary buffering capacity test in 50 males and 50 females Koreans aged form the age 20 to 29. Thereafter, the data from the four kinds of caries activity test were analysed and evaluated comparatively. The obtained results were as follows. 1. Unstimulated salivary flow rate for five minutes was 2.2ml in males and 1.7ml in females but the sexual difference was not significant statistically. 2. Stimulated salivary flow rate for five minutes was 7.1ml in males and 4.8ml in females. 3. Salivary viscosity was 1.9 in males and 1.7 in females but the sexual diffrence was not significant statistically. 4. Salivary buffering capacity was 8.5 drops in males and 6.7 drops in females 5. It seems the stimulated salivary flow rate and buffering capacity to be the anti-cariogenic factors in the occurrence of permanent tooth caries in Koreans.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.7
• /
• pp.307-314
• /
• 2001

A moving coil linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The variation of mover position and the consequent changes of coil flux path affect the coil inductance, because coil flux leaks at the open region of LOA stator. The interaction between permanent magnet and armature field is to shift the airgap flux density variation due to the magnet alone by a certain amount. The unbalanced reciprocation force due to armature reaction field decreases the advantage of moving coil LOA, such as a high degree of linearity and controllability in the force ad motion control. This paper firstly describes the coil inductance, the deviation of flux density, and the unbalanced reciprocation force, which are derived form the permeance model of LOA. Secondly, the analytical method are verified using the 2D finite element method and tests. Finally, the dynamic simulation algorithm taking the armature reaction effect and variable inductance into account, is proposed and confirmed through the experiment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.112-116
• /
• 2002

A sensorless control strategy for permanent magnet synchronous motors is presented in this paper. A speed control scheme based on the measurement and observation of stator current, voltage. and flux vector is proposed. Two phase voltages and two stator currents are measured and processed in discrete form in DSP. The rotor position and speed are estimated through the stator flux and its derivative estimation. Flux and its derivative are calculated in the stationary reference frame and used to estimate the speed and position. The rotor position angle is then used in a microcontroller to produce the appropriate stator current command signals for the hysteresis current controller of the inverter. The closed-loop speed control has been shown to be effective from standstill to rated speed. Moreover, a flux drift problem caused by the integration can be eliminated so that a stable sensorless starting and running operation can be achieved. Computer simulation and experimental results are presented to demonstrate the effectiveness of the proposed scheme.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.115-122
• /
• 2020

A promising method for removal of Cs ions from water and their incorporation into stable crystal structure ready for safe and permanent disposal was described. Cs-exchanged X zeolite was hot-pressed at temperature ranging from 800 to 950 ℃ to fabricate dense pollucite ceramics. It was found that the application of external pressure reduced the pollucite formation temperature. The effect of sintering temperature on density, phase composition and mechanical properties was investigated. The highest density of 92.5 %TD and the highest compressive strength of 79 MPa were measured in pollucite hot-pressed at 950 ℃ for 3 h. Heterogeneity of samples obtained at 950 ℃ was determined using scanning electron microscopy. The pollucite hot-pressed at 950 ℃ had low linear thermal expansion coefficient of ~4.67 × 10^-6 K^-1 in the temperature range from 100 to 1000 ℃.

• Journal of Veterinary Science
• /
• v.21 no.6
• /
• pp.83.1-83.14
• /
• 2020

Background: Bovine and porcine teeth are often used in in vitro experiments as substitutes of human teeth. Objectives: The aim of the present study was to perform a comparative analysis of enamel morphology of permanent human, bovine and porcine teeth under the scanning electron microscope. Methods: As many as 10 human, 10 bovine, and 10 porcine teeth were studied. All the teeth were sectioned and the halves were randomly divided into 2 groups according to the examined tissue (vestibular enamel at the mid-height of the dental crown and in the cervical area). Human and bovine enamel was etched for 15 sec and porcine enamel for 30 sec. The scanning electron microscope analysis was performed. The length and width of enamel prisms were determined with the "Met-Ilo" 1.1 computer program. Results: All enamel samples revealed the same etching pattern-Silverstone's type 2. Bovine enamel showed a similar porosity and the amount of interprismatic enamel compared to human enamel while the amount and width of interprismatic enamel bands in porcine enamel were evidently greater. The shape of the porcine prisms was visually similar to human prisms, although dimensions were significantly different. However, bovine prisms differed in form and appeared to be distinctly elongated. Conclusions: Reported findings indicate that the results of experimental studies carried out on bovine and porcine enamel should not be compared with the results obtained on human enamel.