Browse > Article

Analysis of Speed Ripple Reduction Methods for Permanent Magnet Synchronous Motor with Eccentric-weight Load  

박정우 (한국전기연구원)
김종무 (한국전기연구원)
이기욱 (한국전기연구원)
Publication Information
The Transactions of the Korean Institute of Electrical Engineers B / v.53, no.3, 2004 , pp. 164-172 More about this Journal
Abstract
This paper presents the comparison results of some kinds of control method in circumstance of eccentric load. The plant to be controlled is a computed tomography(CT) driven by a permanent magnet synchronous motor. In a CT system, many units are attached on the rotationally part of a gantry such as x-ray tube, detector, heat exchanger, and data acquisition unit etc. Therefore keeping many components to balance which have different weight is not easy; this is inescapable problem in the all CT systems. To solve this problem against eccentric load, some kinds of control method have been compared and analysed by using protype CT. From the experimental results it is vilified that the CT drive system with model reference control method indicates higher speed regulation ability regardless of variable eccentric weight and uncertain position, and also in the limit condition of constant eccentric weight and fixed position, the compensation method with sinusoidal form is a strong candidate in view of speed ripple reduction.
Keywords
동기전동기;편심부하;속도리플 저감;기분모델제어기;토크추정기;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 강규홍, 홍정표,김규탁, 박정우,'직접 구동 슬롯리스형 영구자석 동기전동기의 설계', 대한전기학회논문지, 제49 권, 12호, pp.789-796, 2000   과학기술학회마을
2 J.W. Park, J.M. Kim, K.W. Lee etc., 'A Compensation Method with Robust Regulation Ability against Eccentricity weight Load', IEEE ICEE, pp.764 -769, 2002
3 Nobuyaki Matsui, Tatsuo Makino, Hirokazu Satoh, 'Autocompensation of Torque Ripple of Direct Drive Motor by Torque Observer', IEEE Trans. on LA. vol.29, no. 1, pp.187-194, JAN/FEB 1993   DOI   ScienceOn
4 Guchuan Zhu, Louis-A Dessaint, Ouassima Akhrif, Azeddine Kaddouri,'Speed Tracking Control of a permanent-Magnet Synchrnous Motor with State and Load Torque Observer', IEEE Trans. on I.E. vol.47, no.2, pp.346-355, 2000   DOI   ScienceOn
5 Sung Jun Park, Han Woong Park, Man Hyung Lee, and Furnio Harashima,'A New Approach for Minimum-Torque-Ripple Maximum-Efficiency Control of BLDC Motor', IEEE Trans. on I.E. vol.47, no.1, pp.109-114, 2000   DOI   ScienceOn
6 최익, 기준모델 적응제어에 의한 영구자석 동기전동기의 서보제어, 서울대학교대학원, 전기공학과 박사학위논문, 1989
7 Shigeo Morimoto, Masayuki Sanada, and Yoji Takeda, 'Wide-Speed Operation of Interior Permanent Magnet Synchronous Motors with High Performance Current Regulator', IEEE Trans. I.A, Vol. 3D, No.4, pp.920-926, 1994   DOI   ScienceOn
8 T.S. Low, M.A.Jabbar and T.S.Tan, 'Design Aspects and Performance of a Slotless PM Motor for Hard Disk', IEEE Trans. J. Magn. pp.664-671, 1995
9 Ungtae Kim and Dennis K. Lieu,'Magnetic field calculation in permanent magnet motors with rotor eccentricity: without slotting effect', IEEE Trans. J. Magn, vol. 34.no. 4. July 1998   DOI   ScienceOn
10 Hans Butler, Model Reference Adaptive Control, Prentice Hall, pp.15-17, 1992