• Journal of Powder Materials
• /
• v.20 no.2
• /
• pp.125-128
• /
• 2013

Magnetic and dielectric properties of rubber composites are controlled by using two kinds of high-permeability metal particles with different electrical conductivity (Sendust, Permalloy), and their effect on microwave absorbance has been investigated, focusing on the quasi-microwave frequency band (0.8-2 GHz). Noise absorbing sheets are composite materials of magnetic flake particles of high aspect ratio dispersed in polymer matrix with various filler amount of 80-90 wt.%. The frequency dispersion and magnitude of complex permeability is almost the same for Sendust and Permalloy composite specimens. However, the complex permittivity of the Permalloy composite (${{\varepsilon}_r}^{\prime}{\simeq}250$, ${{\varepsilon}_r}^{{\prime}{\prime}}{\simeq}50$) is much greater than that of Sendust composite (${{\varepsilon}_r}^{\prime}{\simeq}70$, ${{\varepsilon}_r}^{{\prime}{\prime}}{\simeq}0$). Due to the large dielectric permittivity of Permalloy composite, the absorbing band is shifted to lower frequency region. However, the investigation of impedance matching reveals that the magnetic permeability is still small to satisfy the zero-reflected condition at the quasi-microwave frequency band, resulting in a small microwave absorbance lower than 10 dB.

• Journal of the Korean institute of surface engineering
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1982

80% Ni-Permalloy is soft magnetic material with high initial permeability and low magnetic coercive force Hc, and is used to computer memory cores and minirelays of communication e-ngineering. In this paper 80 Permalloy thin film on copper cathode was alloy-deposited from Watts so-lution contatining FeSO4$.$7H2O. The amount of FeSO4$.$7H2O in the solution, pH, temperature of the solution and plating current density were varied as parameters and the resulting comp-osition changes of deposited film were analyzed electrochemically with respect to the parame-ters. From the above procedure electroplating conditions for deposition of 80 Permalloy were est-ablished as following: 17-21 g/$\ell$ of FeSO4$.$7H2O in Watts solution, current density 1.0-2.0 Amp/dm2, pH 2.5-3.0 and temperature range of 50-60$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.789-791
• /
• 2001

이전에 개발된 Magnetic Fluid Linear Pump는 자기 회로가 솔레노이드 형식으로 자기회로의 대부분이 공극이기 때문에 자기저항이 크다. 이런 문제로 인해서 Linear Pump의 자성유체에 영향을 주는 자기장이 크지 않고 펌핑 압력은 높지 않다. 따라서 본 논문에서는 Permalloy Yoke를 이용하여 Linear Pump를 소형화하고 자기 저항을 최소화함으로써 펌핑 압력을 향상시켰다. 또한 Linear Pump의 3D해석을 통하여 Yoke의 폭, 두께, 간격에 대한 최적 크기를 계산하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.29-35
• /
• 2002

This study shows the process design and forming analysis of permalloy shielding can that support the automobile multi-display parts to indicate the accurate information of car. This study is particularly important, since the accuracy of permalloy shielding can is known to affect the magnetic properties such as coercivity and permeability quite sensitively. The objective functions are defects such as hemming wind, hemming length, hemming wrap and tightness in prehemming process. The pre-hemming angle is considered as design parameter. The commercial finite element program PAM-STAMP™ was used to simulate the pre-hemming and hemming process. The ANN (Artificial Neural Network) has been implemented for minimizing of objective function and for investigating effect of punch angle relevant to the pre-hemming process. The results of analysis to validate the proposed design method are presented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.478-483
• /
• 2005

In this paper, we synthesized 10 to 20 nm diameter NiFe nanoparticles and nanoparticle films utilizing supersonic jet deposition of nanoparticle aerosols generated by laser ablation of $30\;to\;45{\mu}m$ diameter permalloy $(Ni_{81}Fe_{19} \;at\;{\%})$ microparticles. The component and composition of the nanoparticles were characterized by an energy dispersive X-ray spectroscopy. The morphology of the nanoparticles and nanoparticle films was analyzed by a high-resolution transmission electron microscopy and a scanning electron microscopy, respectively. The experimental results showed that the nanoparticles and nanoparticle films have remarkable properties with an excellent preservation of the composition of feedstock permalloy microparticles. The purpose of the present work is to present details on the composition and nanostructural characterizations for NiFe nanoparticles and nanoparticle films prepared by laser ablation of microparticles (LAM).

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.107-108
• /
• 2007

In this paper, the EM wave absorbers were designed and fabricated for collision-avoidance radars using Carbon of a dielectric material and Permalloy of a magnetic material with CPE, because radar system has some problems including false image and system-to-system interference. We fabricated some samples in different composition ratio of Carbon and Permalloy, and defined that optimum composition ratios of Carbon and Permalloy with CPE were Carbon:CPE=20:80 wt% and Permalloy:CPE=70:30 wt%. And absorption abilities at different thicknesses of the EM wave absorbers were simulated using the material properties. The EM wave absorbers were manufactured based on the simulated design. Simulated and measured results agree very well.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.4
• /
• pp.185-192
• /
• 1994

The electrodeposition of permalloy thin film on various substrates was carried out using a paddle cell. The magnetic properties of film deposited were affected mostly by the Fe content in permalloy film and the effect of heat treatment in the presence of applied magnetic field was investigated. The optimum conditions for the electrodeposition of permalloy for the application of thin film head were presented in terms of iron concentration in bath and applied current density.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.423-427
• /
• 1999

Electroplating of 80%Ni permalloy thin plate for magnetic core materials. was studied The convected flow of electrolyte was used for stirring methode. The current density could be increased up to 250mA/$\textrm{cm}^2$ by flow cell. The composition of electroplated layer with vespect to current density and flow rate was investigated and experimental equation to predict the composition was made. How cell yielded more uniform thickness distribution than paddle cell did. The composition distribution was also studied. The thickness was the most important factor to the permeability. The permeability of 5$\mu\textrm{m}$plated permalloy was over 2000 at 1 MHz.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.101-101
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.109-110
• /
• 2004