• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.329-336
• /
• 2002

The along-wind response of a surface-mounted elastic fence under the action of wind was investigated numerically. In the computations, two sets of equations, one for the simulation of the unsteady turbulent flow and the other for the calculation of the dynamic motion of the fence, were solved alternatively. The resulting time-series tip response of the fence as well as the flow fields were analyzed to examine the dynamic behaviors of the two. Results show that the flow is unsteady and is dominated by two frequencies: one relates to the shear layer vortices and the other one is subject to vortex shedding. The resulting unsteady wind load causes the fence to vibrate. The tip deflection of the fence is periodic and is symmetric to an equilibrium position, corresponding to the average load. Although the along-wind aerodynamic effect is not significant, the fluctuating quantities of the tip deflection, velocity and acceleration are enhanced as the fundamental frequency of the fence is near the vortex or shedding frequency of the flow due to the occurrence of resonance. In addition, when the fence is relatively soft, higher mode response can be excited, leading to significant increases of the variations of the tip velocity and acceleration.

• 접착 및 계면
• /
• 제7권3호
• /
• pp.10-15
• /
• 2006

After anchoring 3-(2-aminoethylamino)propyltriethoxysilane (APTES) onto the surfaces of the channels within ordered mesoporous silica, SBA-15, we dispersed $Cu^{2+}$-perfluorophthalocyanine into the modified SBA-15 channels. From small-angle X-ray scattering (SAXS) patterns and transmission electron microscopy (TEM) images, we confirmed that both the calcined and $Cu^{2+}$-perfluorophthalocyanine-incorporated SBA-15 samples possessed ordered periodic structures and hexagonal symmetry lattices (p6mm). The value of the $d_{100}$ spacing was decreased after the incorporation of $Cu^{2+}$-perfluorophthalocyanine into the modified SBA-15 channels. We used FTIR and UV-Vis spectroscopy and thermogravimetric analysis (TGA) to characterize both the modified SBA-15 and the $Cu^{2+}$-perfluorophthalocyanine-incorporated SBA-15 samples. From scanning electron microscopy (SEM) images and $N_2$ sorption measurements, we found that the $Cu^{2+}$-perfluorophthalocyanine units were incorporated within the modified SBA-15 channels, rather than on the external surfaces of the modified SBA-15 channels.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.194-202
• /
• 1996

고온가압성형된 다결정상 titanium diboride내에 형성된 전위구조를 투과전자현미경으로 분석하였다. Ion beam thinner를 사용하여 제작한 박편시편은 전위구조에 대한 특징을 드러내 보였다. 이들 특징들은 전위들로 배열된 적각결정입계, ledges나 steps들이 결정입계면에 존재하는 고각결정입계 등이다. 결정입계에서의 ledges나 steps들은 전위형성이나 결정입계 근처에서의 crack전파와 같은 결함구조로서 평가되었고, 고각결정입계는 부분적으로 결정입계전위를 포함하고 있는 것으로 관찰되었다. 또한, 시편의 미세구조에 존재하는 전위들의 Burger's vectors를 결정하였다.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.245-249
• /
• 2010

Two dimensional(2D) pair-photonic crystals (pair-PCs) have been fabricated by a multiple-exposure nanosphere lithography (MENSL) method using the self-assembled nanospheres as lens-mask patterns and the collimated laser beam as a multiple-exposing source. The arrays of the 2D pair-PCs exhibited variable lattice structures and shape the control of rotating angle (${\Theta}$), tilting angle (${\gamma}$) and the exposure conditions. In addition, the base period or filling factor of pair-PCs as well as their shapes could be changed by experimental conditions and nanosphere size. A 1.18-${\mu}m$-thick resist was spincoated on Si substrate and the multiple exposure was carried out at change of ${\gamma}$ and ${\Theta}$. Images of prepared 2D pair-PCs were observed by SEM. We believe that the MENSL method is a suitable useful tool to realize the pair-periodic arrays of large area.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.503-510
• /
• 2005

In this paper, the topology optimization of inner-wall stiffener of cylindrical containers for the use as a rocket fuel tank is presented. Such structures for space mission should have high stiffness against the buck]ins while their weight should be maintained low from the viewpoint of cost and performance. Therefore, in the present work the reciprocal of critical buckling load is adopted as an objective function and the total mass of stiffener is constrained to a prescribed value. Due to the restriction of computational resources a section of cylindrical container is topologically optimized and this result is repeated to obtain the full design. Also, for manufacturability the concept of periodic topology pattern in design domain is newly introduced. In the numerical examples, the results by the proposed approach are investigated and compared with those of isogrid design.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.377-380
• /
• 2007

스월 난류연소기에서의 혼합기 유입온도와 스월세기에 따른 연소불안정 발생 메커니즘 알아보기 위하여 Large Eddy Simulation을 수행하였다. 스월각 45도 경우 연료공기 혼합기의 온도를 600K에서 660K으로 증가시켰을 경우 화염분기(Bifurcation)현상이 관찰되었고, 스월 강도가 변할 경우 온도와 관계없이 화염분기가 일어나거나 그렇지 않음을 확인하였다. 벽면근처의 혼합가스 유동속도와 화염속도간의 상관관계는 화염분기현상의 발생에 주요한 인자임을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1631-1636
• /
• 2003

The purpose of this study is to analyze the phenomena of the thermally-induced vibration for the flexible space structure due to abrupt change of radiation heating circumstance using the numerical analyze and experiment test. In order to verify this structure, numerical approaches on the simplified flexible tube were compared with experimental test results at the ground experimental facility In this analyze, it was found that the thermal deformation occurs firstly due to fast radiation heating of flexible structure and then the thermally-induced vibration would be induced due to small periodic change of temperature. According to comparison of numerical and experimental result, in case of no tip mass, the first mode vibration by the numerical analyze was O.78Hz same as that of the experimental result However in case of increase tip-masses of 8g l6g, 50g and 100g, the first modes vibration theoretical analyze were 1.75Hz, 1.3Hz, 0.87Hz and O.73Hz, in decrease trend respectively and those by experimental test were 234Hz, 1.5Hz, O.78Hz and O.78Hz in decrease trend respectively Although using the simpled equation for the estimation, the estimation results were similar to experimental results.

• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.43-50
• /
• 2009

Design trend, transparency, which has been developed under a reflection of current periodic environment, has been exposed to people all over the world through varieties of architecture facade and interior space. As interior space follows this trend, which has difference in showing space from the past, transparency becomes an important measure of showing openness of certain space. Main objective of this research is to understand a characteristics of materials that leads transparency a important measure to the modern interior design, and this will set the range to this applicable materials for appropriate areas of defining transparency in an interior. Characteristic uses of transparent materials found in this research which leads transparency into interior space are described below: First, there are two perspectives in transparency. One is visibility and material wised transparency and the other is conditional and spacial wised transparency. With this knowledge, we can expand a level of transparency with ideas such as clarity, opacity, visible transmission, and reflection, and this broadened range will vary the acceptable materials used to show transparency. Second, transparent materials are used with many different purposes in modern interior space as furnitures, sanitary fixtures, partitions, and other structures. With using modern technology in reforming this materials brought new methods in structure composing. last, transparent materials' expnt pable characteristics made modern interior space to have a control over spacial homogeneity, a simplified octlines, weakened boundaries, and compositional effects by interference and vision.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.57-62
• /
• 2011

As NPPs' operating times increase, the integrity of nuclear components is continually degraded due to aging effects of systems, structures and components. In addition, for the case of continued operation beyond design life, additional aging effects occurred during the extended operating period lead to more degradation of the integrity of nuclear components. Therefore, it is very important to mange and evaluate the aging to secure the safety of NPPs. Wolsong unit 1 is approaching to its design life of 30 years in 2012. The license renewal documents for continued operation of Wolsong unit 1 Is under reviewing now. In this paper, regulatory technologies for continued operation of Wolsong unit 1 developed by KINS will be introduced. That technologies include the safety review guidelines, regulatory guides for aging management program and regulatory program for audit calculation.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.186-196
• /
• 2000

본 논문에서는 이중통신용 안테나 시스템을 위한 변형된 사각 루프 주파수 선택 반사기를 제안하고, 그 특성 을 해석하였다 변형된 사각 루프 주파수 선택 반사기를 해석함에 있어서 유전체의 영향과 주기적 배열구조임을 고려하기 워하여 파수 영역 방법(Spectral Domain Method)과 Floquet 이론을 도입하였으며, 수치해석 방법으로 는 rooftop basis function을 이용한 모멘트법을 적용하였다 해석결과로는 기존의 사각 루프와 변형된 사각 루프 의 전송 특성플 비교하였으며. 변형된 사각 루프의 경우 입사각과 편파 변화에 따른 전송 특성도 제시하였다. 수 치해석 방법의 타당성을 검증하기 위해 변형된 사각 루프 주파수 선택 반사기를 실제 제작 및 측정하여 수치해 석 결파와 비교하였다. 측정결과는 수치해석 결과와 비교적 잘 일치함을 보였다