• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.245-249
• /
• 2010

Two dimensional(2D) pair-photonic crystals (pair-PCs) have been fabricated by a multiple-exposure nanosphere lithography (MENSL) method using the self-assembled nanospheres as lens-mask patterns and the collimated laser beam as a multiple-exposing source. The arrays of the 2D pair-PCs exhibited variable lattice structures and shape the control of rotating angle (${\Theta}$), tilting angle (${\gamma}$) and the exposure conditions. In addition, the base period or filling factor of pair-PCs as well as their shapes could be changed by experimental conditions and nanosphere size. A 1.18-${\mu}m$-thick resist was spincoated on Si substrate and the multiple exposure was carried out at change of ${\gamma}$ and ${\Theta}$. Images of prepared 2D pair-PCs were observed by SEM. We believe that the MENSL method is a suitable useful tool to realize the pair-periodic arrays of large area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.503-510
• /
• 2005

In this paper, the topology optimization of inner-wall stiffener of cylindrical containers for the use as a rocket fuel tank is presented. Such structures for space mission should have high stiffness against the buck]ins while their weight should be maintained low from the viewpoint of cost and performance. Therefore, in the present work the reciprocal of critical buckling load is adopted as an objective function and the total mass of stiffener is constrained to a prescribed value. Due to the restriction of computational resources a section of cylindrical container is topologically optimized and this result is repeated to obtain the full design. Also, for manufacturability the concept of periodic topology pattern in design domain is newly introduced. In the numerical examples, the results by the proposed approach are investigated and compared with those of isogrid design.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.377-380
• /
• 2007

Large Eddy Simulation has been conducted to investigate both stable and unstable flame structures in a swirl turbulent combustor. While a flame is stabilized with periodic dynamic structure at 600K, a slight increase in the flame temperature of inlet mixture, 660K, lead to bifurcation of flame at swirl angle 45 degrees. It was observed that both swirl number and mixture temperature affect a flame bifurcation and the former is a major parameter. One major mechanism contributing to the unstable flame is that the local flame speed overshadows the local flow velocity near the wall of the combustor.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1631-1636
• /
• 2003

The purpose of this study is to analyze the phenomena of the thermally-induced vibration for the flexible space structure due to abrupt change of radiation heating circumstance using the numerical analyze and experiment test. In order to verify this structure, numerical approaches on the simplified flexible tube were compared with experimental test results at the ground experimental facility In this analyze, it was found that the thermal deformation occurs firstly due to fast radiation heating of flexible structure and then the thermally-induced vibration would be induced due to small periodic change of temperature. According to comparison of numerical and experimental result, in case of no tip mass, the first mode vibration by the numerical analyze was O.78Hz same as that of the experimental result However in case of increase tip-masses of 8g l6g, 50g and 100g, the first modes vibration theoretical analyze were 1.75Hz, 1.3Hz, 0.87Hz and O.73Hz, in decrease trend respectively and those by experimental test were 234Hz, 1.5Hz, O.78Hz and O.78Hz in decrease trend respectively Although using the simpled equation for the estimation, the estimation results were similar to experimental results.

• Korean Institute of Interior Design Journal
• /
• v.18 no.4
• /
• pp.43-50
• /
• 2009

Design trend, transparency, which has been developed under a reflection of current periodic environment, has been exposed to people all over the world through varieties of architecture facade and interior space. As interior space follows this trend, which has difference in showing space from the past, transparency becomes an important measure of showing openness of certain space. Main objective of this research is to understand a characteristics of materials that leads transparency a important measure to the modern interior design, and this will set the range to this applicable materials for appropriate areas of defining transparency in an interior. Characteristic uses of transparent materials found in this research which leads transparency into interior space are described below: First, there are two perspectives in transparency. One is visibility and material wised transparency and the other is conditional and spacial wised transparency. With this knowledge, we can expand a level of transparency with ideas such as clarity, opacity, visible transmission, and reflection, and this broadened range will vary the acceptable materials used to show transparency. Second, transparent materials are used with many different purposes in modern interior space as furnitures, sanitary fixtures, partitions, and other structures. With using modern technology in reforming this materials brought new methods in structure composing. last, transparent materials' expnt pable characteristics made modern interior space to have a control over spacial homogeneity, a simplified octlines, weakened boundaries, and compositional effects by interference and vision.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.4
• /
• pp.57-62
• /
• 2011

As NPPs' operating times increase, the integrity of nuclear components is continually degraded due to aging effects of systems, structures and components. In addition, for the case of continued operation beyond design life, additional aging effects occurred during the extended operating period lead to more degradation of the integrity of nuclear components. Therefore, it is very important to mange and evaluate the aging to secure the safety of NPPs. Wolsong unit 1 is approaching to its design life of 30 years in 2012. The license renewal documents for continued operation of Wolsong unit 1 Is under reviewing now. In this paper, regulatory technologies for continued operation of Wolsong unit 1 developed by KINS will be introduced. That technologies include the safety review guidelines, regulatory guides for aging management program and regulatory program for audit calculation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.186-196
• /
• 2000

In this paper, modified square loop frequency selective surface for dualband communication antenna systems is proposed, and the scattering characteristics is discussed. The analysis for the problem of scattering by periodic structures with a dielectric slab is formulated using the spectral-domain immittance approach and Floquet's theorem. The method of moments which uses rooftop subdomain basis function is employed to solve the equations. Numerical results include the comparison between the transmission characteristic of general square loop and that of modified square loop. Also, the transmission characteristics of modified square loop for arbitrary incident angle and polarization is presented. To verify analysis results, modified square loop frequency selective surface was fabricated and the calculated results were compared with the measured results. The measured results showed good agreement with the calculated results.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.209-215
• /
• 2006

Circular Bragg gratings(CBGs) canbe incorporated in most of the semiconductor laser devices because of the frequency-selective property applicable as an optical narrowband-pass filter in DWDM optical communications. In this paper, the optical filtering characteristics of CBGs are evaluated by a novel and simple analytic modal transmission-line theory(MTLT), which is based on Floquet-Babinet's principle. The numerical results reveal that this method offers a simple and convenient algorithm to analyze the filtering characteristics of CBGs as well as is extended conveniently to evaluate the guiding problems of circular multi-layered periodic structures.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2012

The resonance properties of circular vertical-cavity surface-emitting lasers (VCSELs) are studied by using a newly developed equivalent network approach. Optical parameters, such as the stop-band or the reflectivity of periodic Bragg mirrors and the resonance wavelength, are explored for the design of these structures. To evaluate the differential quantum efficiency and the threshold current density, a transverse resonance condition of circular modal transmission-line theory is also utilized. This approach dramatically reduces the computational time as well as gives an explicit insight to explore the optical characteristics of circular VCSELs.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.4
• /
• pp.293-299
• /
• 2016

In this paper, a projection method is introduced which is used in topology design optimization. In the projection method, each active design variable is projected onto the design domain depending on the shape and size of the projection functions, and the finite element under this projection receives a solid material. Furthermore, the size of the projection function defines the minimum length scale of the structural members. Therefore, a designer can easily apply design constraints without complicated post-processing procedure. In addition, the projection method can be combined with the homogenization theory, and applied to material design problem for composite materials. Topology design optimization for the unit-cell of the periodic structures can maximize the effective material properties, which yields the optimal material distribution with maximum bulk or shear moduli under a given volume fraction.