• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.571-574
• /
• 2010

Large-eddy simulation has been conducted to simulate turbulent boundary-layer flows over an array of regularly distributed obstacles considering various cases of a wind incident angle. The effect of wind direction was investigated in the square cube array that periodic boundary condition was imposed. Characteristics of the turbulent flow over the obstacle array have been found to be very sensitive to the direction of prevailing wind or of mean wind or of mean pressure gradient but varied with height, specially below the urban canopy. Turbulent statistics are changed sensitively with the direction of mean pressure gradient around 10 degree.

• Applied Science and Convergence Technology
• /
• 제25권2호
• /
• pp.42-45
• /
• 2016

A two-dimensional metal hole array (2DMHA) structure is fabricated by conventional photo-lithography and electron beam evaporation. The transmittance of the 2DMHA is measured at long wave infrared (LWIR) wavelengths (${\lambda}{\sim}10$ to $24{\mu}m$). The 2DMHA sample shows transmittance of 70 and 67% at $15.4{\mu}m$ due to plasmonic resonance with perforated silver and gold thin films, respectively, under surface normal illumination at LWIR wavelengths. The measured infrared spectrum is separated into two peaks when the size of the hole becomes larger than a half-pitch of the hole array. Six degenerated plasmon modes (1,0) at the metal/Si surface split to three modes at an incident beam angle of $45^{\circ}$ with respect to the surface normal direction, and wavelength shifts of the transmitted spectrum are observed in a red shift and blue shift at the same time.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4095-4100
• /
• 2011

본 논문에서는 UWB 통신용으로 사용할 수 있는 대수 주기 보우타이 다이폴 배열 (LPBDA) 안테나에 대하여 연구하였다. 일반적인 LPDA 안테나에서 사용되는 다이폴 소자 대신에 보우타이 형태의 다이폴 소자를 사용하였고, 보우타이 소자의 양끝으로 벌어진 각도에 따른 LPBDA 안테나의 입력 반사계수와 이득 특성을 분석하였다. 양끝으로 벌어진 각도가 증가할수록 LPBDA 안테나의 가장 낮은 동작 주파수가 저주파수 대역으로 이동하여 주파수 대역폭이 늘어나지만, 평균이득은 줄어들었다. 그러나, LPDA 안테나에 비해 이득의 변화는 적고 전후방비가 향상되었다. 표준 LPDA 안테나와 양끝으로 벌어진 각도가 13도인 LPBDA 안테나를 FR4(비유전율 4.4, 두께 0.8 mm) 기판상에 제작하였다. 측정한 이득은 3.1~10.6 GHz 대역에서 표준 LPDA 안테나는 4~6.5 dBi 범위에 있고 LPBDA 안테나는 4.2~5 dBi 범위에 있다.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.784-790
• /
• 2003

본 논문은 세라믹재료가 강화재로써 보강된 복합재료가 횡방향의 단축인장하중을 받는 경우, 복합재료의 변형, 재료내 발생되는 손상의 특징, 및 응력-변형률 특성에 관한 컴퓨터 해석결과이다. 해석은 SiC/Ti 시스템을 대상으로 하였으며, 특성은 강화재의 배열형태, 강화재/기지 계면에서의 결합유무, 강화재의 부피분율변화에 대하여 각기 해석되었다. 계면에서 강한 결합이 있는 복합재와는 달리, 약한 결합의 복합재는 인장하중에 의하여 세라믹/기지 계면에서 분리가 발생되었다. 이 분리는 전체 복합재의 강성을 감소시키며, 세라믹 강화재의 부피분율이 증가할수록 탄성계수 및 횡방향 평균응력의 최종크기를 나타내는 한계응력의 크기감소로 나타났다. 계면결합이 강한 경우는 세라믹 부피분율이 증가할수록 사각형 배열보다는 육각형배열의 복합재에서 다소 큰 증가율로 나타났다. 그러나, 계면결합이 약한 경우는 세라믹 부피분율이 증가할수록 사각형 배열보다는 육각형배열의 복합재에서 상대적으로 큰 감소율로 해석되었다. 본 연구의 해석결과는 알려진 문헌의 결과와 잘 일치하였다.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.8-14
• /
• 2013

Steam turbine blades and discs of nuclear power plants are one of the most highly stressed areas of turbine rotor, and periodic inspection of the blade roots is essential for monitoring integrity and preventing turbine failure. Ultrasonic technique is applied for volumetric inspection of blade root. However, the complexity of blade root geometry imposes challenges to inspection of blades and discs. Recently, phased array ultrasonic inspection technology is being applied to numerous power generation inspection applications including turbine rotor. The phased array ultrasonic technique requires customized inspection wedges which are generally necessary to generate effectively higher incident angle. But the usage of this wedge can cause access limitation for the lower stage blades of turbine because of the wedge front length. Therefore, the shear wave phased array probe which can generate high inspection angle without wedge is essentially necessary. In this study, feasibility study is conducted for the shear wave phased array ultrasonic probe application to blade and disc inspection. As results, the experimental results show that the shear wave phased array probe can detect the flaw and measure its size with reliable accuracy. Therefore if this shear wave phased array probe is applied to field inspection of blade and disc, more reliable inspection is expected for turbine having access limitation.

• 한국인쇄학회지
• /
• 제16권2호
• /
• pp.45-59
• /
• 1998

Halftonig is a technique to create the appearance of intermideate tone levels by controlling the spatial distribution of the binary pixel values. Recently, many printing devices such as image setter, inkjet printer, laser printer and facsimile, generate image, they require the technique. Ordered dither is achieved comparing the gray scale image to periodic array. This method is fast, but it occurs periodic patterns. Conentional error diffusion generates a good image. But processing speed is very slow and appeares worm artifacts in middle tone scale. To improve it, Bns(Blue noise Screen) is developed based on Gaussian distribution. In this paper, we discribe methods to design BNS based human visual characteristics and to improve blue appearing at edge area of image by USM(using unsharp mask).

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1950-1957
• /
• 2004

Analysis for structures composed of materials containing regularly spaced in-homogeneities is usually executed by using averaged material properties. In order to evaluate the effective properties, a unit cell is defined and loaded somehow, and its response is investigated. The imposed loading, however, should accord to the status of unit cells immersed in the macroscopic structure to secure the accuracy of the properties. In this study, mathematical description for the periodicity of the displacement field is derived and its direct implementation into FE models of unit cell is attempted. Conventional finite element code needs no modification, and only the boundary of unit cell should be constrained in a way that the periodicity is preserved. The proposed method is applicable to skew arrayed in-homogeneity problems. Homogenized in-plane elastic properties are evaluated for a few representative cases and the accuracy is examined.

• 충청수학회지
• /
• 제19권2호
• /
• pp.141-151
• /
• 2006

We investigate the multiplicity of $2{\pi}$-periodic solutions of the nonlinear Hamiltonian system with almost polynomial and exponential potentials, $\dot{z}=J(G^{\prime}(z)+h(t))$, where $z:R{\rightarrow}R^{2n}$, $\dot{z}=\frac{dz}{dt}$, $J=\(\array{0&-I\\I&o}\)$, I is the identity matrix on $R^n$, $H:R^{2n}{\rightarrow}R$, and $H_z$ is the gradient of H. We look for the weak solutions $z=(p,q){\in}E$ of the nonlinear Hamiltonian system.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.52-60
• /
• 2002

The purpose of this research is to study the vibration and acoustic pressure radiation from a thin isotropic flat plate stiffened by a rectangular array of beams, and excited by a time harmonic point force. These constructions on aircraft and ship structures are often subjected to fiequency dependent pressure fluctuations and forces. Forces from the these excitations induce structural vibrations in a wide range of fiequencies, which may cause such things as acoustic fatigue and internal cabin noise in the aircraft. It is thus important that the response characteristics and vibration modes of such periodic structures be horn. From this theoretical model, the sound pressure levels(SPL) in a semi-infinite fluid(water) bounded by the plate with the variation in the locations of an external time harmonic point farce on the plate can be calculated efficiently using three numerical tools such as the Gauss-jordan method the LU decomposition method md the IMSL numerical package.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.682-688
• /
• 2009

A periodic away of zinc oxide(ZnO) micro-rods as fabricated by using chemical bath deposition and photo-lithography. Vertically aligned ZnO micro-rods array was successfully grown by chemical bath deposition method on ZnO seed layer. The ZnO seed layer was deposited on glass and the patterning was made by standard photo-lithography technique. The selective growth of ZnO micro-rods as achieved with the masked ZnO seed layer. The fabricated ZnO micro rods were found to be single crystalline and have grown along hexagonal c-axis direction of (0002) which is same as the preferred growth orientation of ZnO seed layer.