• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1615-1624
• /
• 1997

In this paper, we propose and analyze various repair methods for a disk subsystem using mirroring. We also study the effects of the repair process that is invoked on disk faults on the mean response time of user disk requests. Finally, we analyze the effects of two different access patterns (uniform and non-uniform) on the repair process and performance. According to the results, average response times for non-uniform access pattern compared with uniform access pattern become shorter as the system load increases. Our simulation results show that the proposed repair algorithm with a short delay gives a better performance than the previous algorithms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.740-747
• /
• 2012

An Active Electronically Scanned Array(AESA) radar required necessarily as the Fire Control Radar(FCR) of recent fighters has ununiform detection range with regard to scan angle due to scan loss. Although the compensation method of scan loss in an AESA radar with variable dwell time is investigated, the effectiveness of the method in a fighter FCR with multi-function such as search, track, and missile guidance within limited resources should be considered systematically. In this paper, uniform search performance of an AESA radar using variable dwell time with regard to scan angle is derived. We assumed the search load of 50 % for case without changing dwell time in fixed frame time and showed the fighter FCR requirement for multi-function is not satisfied because the search load for the uniform search performance should be increased by about 100 %. On the other hand, in case of increasing the frame time for the uniform search performance and search load of 50 %, degradation of the search performance is shown by 86.7 % compared with the former. Based on these analyses, the effective beam operation strategy on an airborne AESA radar with uniform search performance in whole scan area is described with consideration of frame time, search load and performance as a whole.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.33-46
• /
• 2000

Uniform is the dress of distinctive design or fashion worn by members of a particular group or serving as a means of identification. The postman's uniform of Ministry of Communication should be distinctive or characteristic clothing to provide high functionality and symbolization of job characteristics, cost effectiveness and esthetic. In order to design the postman's new uniform available in 2000, there has been a satisfaction survey to 1,116 postmen. A thorough analysis of survey and informal and face-to-face discussion with postmen give the direction of design concept. One of the most important things in the design concept is to make the uniform high quality & refinement. The style is a refined jumper suit in consideration of form stability, wearing satisfaction, convenience in activity. The basic colors selected are navy and medium gray. The colors of jumper are MOC red ; C.I color Green : a representative color of youth, white : a symbolic color of bright future. All three colors are plaid on a basic nary color. In the selection of the textile, synthetic fiber (Polyester 65%, rayon 35%) equipped with UV cutting as well as water resistance etc. was recommended. In the uniform design process, the effective communication with user (postman) is critical to find the requirements and needs of uniform user (postman). Also. the uniform designer should reflect the above four key factors in design development. Therefore, the uniform should provide the user with high job performance and job pride in wearing the uniform.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.303-314
• /
• 2018

Drying shrinkage in concrete caused by drying and the associated decrease in moisture content is one of the most important factors influencing the long-term deflection of steel-concrete composite slabs. The presence of profiled steel decking at the bottom of the composite slab causes non-uniform drying from top and bottom of the slab resulting non-uniform drying shrinkage. In this paper, a hydro-mechanical analysis method is proposed to simulate the development of non-uniform shrinkage through the depth of the composite slab. It also demonstrates how this proposed analysis method can be used in conjunction with previously presented structural analysis model to calculate the effects of non-uniform shrinkage on the long-term deflection of the slab. The method uses concrete moisture diffusion model to simulate the non-uniform drying of composite slab. Then mechanical models are used to calculate resulting shrinkage strain from non-uniform drying and its effect on the long-term behaviour of the composite slabs. The performance of the proposed analysis method is validated against experimental data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.7
• /
• pp.553-559
• /
• 2012

A plate-fin heat exchanger is a type of heat exchanger widely used in air conditioners, and tubes and fins are tightly assembled by the mechanical expansion process of tubes. The tube expansion process deforms the grooves inside the tube, and the groove shapes also affect the adhesion between tubes and fins. In this study, the adhesion and heat transfer performance affected by the tube expansion of the non-uniform groove shape tube with different heights are investigated by both analysis and experiments. From the analysis method, it was shown that the contact pressure of non-uniform groove tube is higher than that of the uniform groove tube, and the most appropriate high groove number of the non-uniform groove tube is designed for the maximum contact pressure. From the experimental results, the decreasing rate of the condensation heat transfer coefficient is smaller in the non-uniform groove tube with different heights, compared to the conventional uniform groove tube. Also, the air-side heat transfer coefficient of the non-uniform groove tube with different heights is higher than that of the uniform groove tubes.

• Solar Energy
• /
• v.20 no.1
• /
• pp.97-108
• /
• 2000

The purpose of this study is to minimize the heat transfer surface area and cold fluid exit temperature of heat exchanger which applied to the refrigeration and air-conditioning system by utilizing the thermoelectric principle. Both uniform and non-uniform current distribution methods which applied to the analysis of the TE elements that incorporates heat exchanger were investigated. The non-uniform current distribution method had the better coefficient of performance and had the lower cold fluid exit temperature of the TE cooling system than the uniform current distribution method. It was found that if a TE cooling system incorporates a heat exchanger, a non-uniform current distribution should guarantee to the lowest cold fluid exit temperature. Also, the hybrid method (combination of the uniform and non-uniform current distribution method) is investigated to achieve the best results by combining the uniform and non-uniform current distributions. The results show that it can lower the cold fluid exit temperature and reduce the heat transfer surface area for the parallel flow arrangement if we apply the constant current in some entry region and the non-uniform increasing current in the direction of the cold fluid flow afterwards.

• Journal of Korea Multimedia Society
• /
• v.5 no.5
• /
• pp.571-581
• /
• 2002

Many periodic broadcasting schemes for near VoD systems are proposed. Recently non-uniform segmentation schemes have been used to develop periodic broadcasting techniques for near VoD. These techniques give significant reductions in start-up latency as compared with more conventional uniform segmentation. However, all of these schemes assume that the videos are CBR-encoded. Since a CBR-encoded video has a target average tate than an VBR encoding, there is potential to obtain further Performance Improvements by using VBR videos. Unfortunately, however, the studies concerning broadcasting with VBR video ate rare and the existing techniques have the problem of virtual loss. In this paper, we modify Skyscraper Broadcasting Scheme for broadcasting with VBR videos which is a representative non-uniform segmentation scheme lot CBR videos. A VBR video can be transmitted at constant bit rate (CBR) by using prefetching. With this idea we propose Modified Skyscraper Broadcasting Schemes for VBR videos and make performance evaluation by simulation. We show that our schemes have a better performance than Skyscraper Broadcasting Scheme for CBR videos.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.450-461
• /
• 2005

In this paper, we derive analytical expressions for the exact pairwise error probability (PEP) of a space-time coded system operating over spatially correlated fast (constant over the duration of a symbol) and slow (constant over the length of a code word) fad­ing channels using a moment-generating function-based approach. We discuss two analytical techniques that can be used to evaluate the exact-PEPs (and therefore, approximate the average bit error probability (BEP)) in closed form. These analytical expressions are more realistic than previously published PEP expressions as they fully account for antenna spacing, antenna geometries (uniform linear array, uniform grid array, uniform circular array, etc.) and scattering models (uniform, Gaussian, Laplacian, Von-mises, etc.). Inclusion of spatial information in these expressions provides valuable insights into the physical factors determining the performance of a space-time code. Using these new PEP expressions, we investigate the effect of antenna spacing, antenna geometries and azimuth power distribution parameters (angle of arrival/departure and angular spread) on the performance of a four-state QPSK space-time trellis code proposed by Tarokh et al. for two transmit antennas.

• Steel and Composite Structures
• /
• v.16 no.4
• /
• pp.357-374
• /
• 2014

The design basis is being shifted from strength to deformation in modern performance-based design codes. This paper presents a practical method for optimization of eccentrically braced steel frames, based on the concept of uniform deformation theory (UDT). This is done by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In the first part of this paper, UDT is implemented on 3, 5 and 10 story eccentrically braced frames (EBF) subjected to 12 earthquake records representing the design spectrum of ASCE/SEI 7-10. Subsequently, the optimum strength-distribution patterns corresponding to these excitations are determined, and compared with four other loading patterns. Since the optimized frames have uniform distribution of deformation, they undergo less damage in comparison with code-based designed structures while having minimum structural weight. For further investigation, the 10 story EBF is redesigned using four different loading patterns and subjected to 12 earthquake excitations. Then a comparison is made between link rotations of each model and those belonging to the optimized one which revealed that the optimized EBF behaves generally better than those designed by other loading patterns. Finally, efficiency of each loading pattern is evaluated and the best one is determined.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.249-257
• /
• 2003

Ring networks are very commonly exploited among local area and metropolitan area networks (LAN/MAN), whereas cells or small fixed-size packets are widely used in synchronized ring networks. In this paper, we present an analytical method for evaluating the delay-throughput performance of a MAC protocol with multiple self-tokens in a slotted ring network under uniform traffic. In our analysis, we introduce the stationary probability, which indicates the number of packets in a node. Also, it is assumed that each node has a sufficiently large amount of self-tokens, and a slotted ring has the symmetry. The analytical results with respect to delay-throughput performance have similar values to computer simulated ones. Furthermore, in order to achieve fair access under non-uniform traffic, we propose an adaptive MAC protocol, where the number of self-tokens in a node dynamically varies, based on the number of packets transmitted within a specified period. In the proposed protocol, when the number of packets transmitted by a node within a specified period is larger than a specified threshold, the node decreases the number of self-tokens in a per-node distributed method. That results in creating free slots in the ring, thus all nodes can obtain an equal opportunity to transmit into the ring. Performance results obtained by computer simulation show that our proposed protocol can maintain throughput fairness under non-uniform traffic.