• 공학교육연구
• /
• 제14권3호
• /
• pp.45-54
• /
• 2011

The purpose of this study is to analyze performance problems in establishing and improving program educational objectives (PEO) and to set up action strategies for the civil engineering program at the A university. To fulfill the purpose, according to the typical needs analysis model, research problems were defined, current conditions and desired conditions were identified, discrepancies and their reasons were examined, and action strategies were derived. Current conditions and desired conditions were identified by analyzing the A civil engineering program's self study report, conducting surveys and interviews with constituents. After the discrepancies and the reasons were examined, performance problems and field force analysis were conducted to draw short term and long term action strategies to improve PEO. Short term action strategies were to announce PEO to current students, to hold faculty seminars to establish and to improve PEO, to renew the list of constituents regularly, to composite an annual milestone, to define roles of the committees, and to enforce educational opportunity toward industrial advisory board members. For the long term strategies, improvement and documentation of PEO assessment system, collection and analysis of constituents' suggestions, establishment of effective accreditation support system, and arrangement of compensation system for the faculties who are in charge of engineering education accreditation responsibility.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.79-86
• /
• 2008

High performance direct-iterative hybrid linear solver for large scale finite element problem is developed. Direct solution method is robust but difficult to parallelize, whereas iterative solution method is opposite for direct method. Therefore, combining two solution methods is desired to get both high performance parallel efficiency and numerical robustness for large scale structural analysis problems. Hybrid method mentioned in this paper is based on FETI-DP (Finite Element Tearing and Interconnecting-Dual Primal method) which has good parallel scalability and efficiency. It is suitable for fourth and second order finite element elliptic problems including structural analysis problems. We are using the hybrid concept of theses two solution method categories, combining the multifrontal solver into FETI-DP based iterative solver. Hybrid solver is implemented for our general structural analysis code, IPSAP.

• Educational Technology International
• /
• 제8권1호
• /
• pp.41-56
• /
• 2007

This study used the performance technology model of Robinson and Robinson to diagnose and solve the problems of the "N" organization. The performance relationship map of the "N" organization was constructed based on the results of the benchmarking, surveys, interviews, and participatory observations. According to the results of analysis, the research team suggested several interventions in three areas: textbooks, educational methods, and educational environments. The study concluded that performance technology is a very effective way to see performance problems from a holistic viewpoint and solve the problems scientifically based on this case study.

• 한국학교수학회논문집
• /
• 제3권2호
• /
• pp.133-154
• /
• 2000

The purpose of this study is to analyze theoretically suggested performance test and find out the actual conditions is math class at high schools and to suggest some devices for improvement for the various problems. To achieve this goal of study, I applied a performance test to the first graders of high school for one semester, and analyzed various phenomena which appeared during its practice. I made several questionnaire based on the materials of an academic seminar, "Several questions and devices for the improvement on mathematics performance test" And through the analysis, I pointed several problems of the performance test and proposed alternative plans. Several practical alternatives can be suggested for the problems appeared in the operation of performance test. The most important thing than any other technical solution in teachers′ diverse endeavor and enthusiastic research attitude to overcome the difficulties. Teachers′ spontaneousness is the foundation to enhance their own specialty and eradicate the propriety of the performance test.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권8호
• /
• pp.726-732
• /
• 2016

Clustering analysis is widely used in data mining to classify data into categories on the basis of their similarity. Through the decades, many clustering techniques have been developed, including hierarchical and non-hierarchical algorithms. In gene profiling problems, because of the large number of genes and the complexity of biological networks, dimensionality reduction techniques are critical exploratory tools for clustering analysis of gene expression data. Recently, clustering analysis of applying dimensionality reduction techniques was also proposed. PCA (principal component analysis) is a popular methd of dimensionality reduction techniques for clustering problems. However, previous studies analyzed the performance of PCA for only full data sets. In this paper, to specifically and robustly evaluate the performance of PCA for clustering analysis, we exploit an improved FCBF (fast correlation-based filter) of feature selection methods for supervised clustering data sets, and employ two well-known clustering algorithms: k-means and k-medoids. Computational results from supervised data sets show that the performance of PCA is very poor for large-scale features.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.485-491
• /
• 2015

This paper shows the design improvement and test model of FAU (Frequency Analysis Unit) in PDD (Partial Discharge Diagnosis system) for 800kV GIS (Gas Insulated Switchgear). We found some problems during operation of previous FAU, such as the aging of fiber-optic converter that can cause communication error, the malfunction of signal analysis circuit etc. And then we solved those problems by design improvement and verified the performance through type test. To monitor partial discharge, the performance of UHF sensor is important but the performance of frequency analysis unit is also very important. So we solved communication error, the malfunction of signal analysis circuit and then increased the operation reliability of FAU by improving fiber-optic converter and signal analysis circuit. Accredited testing laboratory carried out the performance verification test according to performance test criteria and procedure of reliability test standards, IEC-60225, 61000 and 60068 etc. We confirmed the test results which correspond with the performance test criteria.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.83-90
• /
• 2011

In general, 20-high Sendzimir mills(ZRM) use small diameter work rolls to provide massive rolling force. Because of small diameter of work rolls, steel strip has a complex shape mixed with quarter, edge and center waves. Especially when the shape of the strip is controlled automatically, the actuator saturation occurs. These problems affect the productivity and quality of products. In this paper, the problems in automatic shape control of ZRM were analyzed. In order to evaluate the problems for the automatic shape control in ZRM, recognition performance was analyzed by comparing the measured shape and the recognized shape. The actuator positions by the shape recognition and the manual operation were compared. From the analysis results, the necessity of the improvement of recognition performance in ZRM is suggested.

• Architectural research
• /
• 제16권4호
• /
• pp.131-137
• /
• 2014

Recently, the development of sustainable building assessment tools as means to invigorate the dissemination of sustainable buildings has been actively progressed. However, many assessment tools involve various problems in terms of assessment method and system framework, which greatly impede their credibility and applicability. If these problems persist over time, the role of sustainable building assessment tools as decision making measures during the design stage will be greatly limited. The objective of the study is to suggest a systematic model for sus- tainable building assessment tools by establishing a logical system of performance assessment framework. For this purpose, the Environmen- tal Impact Assessment(EIA) framework used in selected and modified to fit the building performance assessment. The analysis of performance assessment tools for sustainable buildings was conducted using the EIA framework. Based on the results of the analysis, a framework for the performance assessment of sustainable buildings was established.

• 한국화재소방학회논문지
• /
• 제28권3호
• /
• pp.72-79
• /
• 2014

본 연구는 119구급대에서 사용하는 주들것의 문제점을 확인하고 그 개선방안을 도출하는 것을 목적으로 한다. 주들것의 문제점 도출을 위하여 문헌분석, 설문조사법을 사용하였고, 개선지표의 도출을 위해 KJ법(가와기타 지로법, 친화도법), 그래프기법, 우선순위 행렬법을 활용하였다. 주들것의 문제점은 현재 구급자동차의 부품으로서 인식되는 점, 성능확인 기준이 미비한 점, 조작 중 구급대원 부상 및 환자사고가 발생하는 점으로 요약할 수 있었으며, 이를 개선할 수 있는 개선지표로는 조작편리성, 고성능, 다기능, 주행성, 내구성, 경량화가 도출되었다. 이 지표에 대한 상호연관성 분석 및 우선순위행렬법 적용 결과는 조작편리성 ${\rightarrow}$ 다기능 ${\rightarrow}$ 주행성 ${\rightarrow}$ 고성능 ${\rightarrow}$ 내구성 경량화 순으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1569-1572
• /
• 2003

Meshfree approximations exhibit significant potential to solve partial differential equations. Meshfree methods have been successfully applied to various problems which the traditional finite element methods have difficulties to handle, including the quasi-static and dynamic fracture. large deformation problems, contact problems, and strain localization problems. A meshfree method based on the reproducing kernel particle approximation(RKPM) is applied to sheet metal forming analysis in this research. Metal forming examples, such as stretch forming and flanging operation, are analyzed to demonstrate the performance of the proposed meshfree method for largely deformed elasto-plastic material.