• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.259-259
• /
• 2000

In the recent, the size of hardware is smaller and the structure is simpler, without reducing the performance of the digital controller. Accordingly, the fixed-point arithmetic is very important in the digital controller. This paper presents simulation to apply the robust control algorithms to DVDR servo controller using the floating-point and fixed-point arithmetic from the matlab. Also, it analyses and compares the performance of control algorithms in the each of point calculation and presents a method for improvement of drop in the performance, quantization error and overflow/underflow from using the fixed-point arithmetic

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.223-228
• /
• 1992

This study was conducted to develop an electro-hydraulic three-point hitch control system using an electro-hydraulic servo valve and microcomputer and to investigate the performance of the three-point hitch control system through indoor and field experiments. 1. The results from indoor experiments coincided with those from computer simulation reported in the previous paper. However, the draft control with the value 4 of Kd showed a slight sustained oscillation after it reached the draft set. 2. From the field experiments, it appeared that the RMS errors increased with the ground speed of tractor. In position control, the three-point hitch control system with electro-hydraulic servo valve showed better performance than that with on-off electro-magnetic valve in the ground speed less than 1.6 m/s. In draft control, however, there was no significant differece in performance between those two systems. 3. In depth control, the both types of electro-hydraulic three-point hitch control system showed better performance than the conventional mechanical-hydraulic three-point hitch control system.

• 재활간호학회지
• /
• 제10권2호
• /
• pp.134-140
• /
• 2007

Purpose: The purpose of this study was to find out relation of general characteristics and memory performance of old adults. Method: The subjects consisted of 160 old adults over the age 60 who living in Seoul. Data were collected by the interview method, using a structured questionnaire and the testing method on the memory performance. Data were analyzed by SPSS PC. Result: The level of memory performance is 63.0 points in the 84 point scale, immediate recall is 7.8 points in the 12 point scale, delayed recall is 7.6 points in the 12 point scale, word recognition is 16 points in the 24 point scale, & face recognition is 16 points in the 24 point scale, & face recognition is 26.8 points in the 40 point scale. Analysis of memory performance according to general characteristics showed that there were statistically differences for age, sex, religion and alcohol. Memory performance showed a significantly negative correlation with age and alcohol, but positive correlation with sex. The significant variables to predict old adults'memory performance are age and alcohol. Conclusion: The findings of this study give useful information for constructing an memory performance improving program based on general characteristics in old adults.

• 한국추진공학회지
• /
• 제25권1호
• /
• pp.12-18
• /
• 2021

본 연구에서는 MT30 가스터빈 엔진의 성능 모델링을 수행하였다. 설계점을 결정하고, 상용 프로그램에서 제공하는 스탠다드 맵을 이용한 스케일링 기법으로 구성품 성능 맵을 생성하였다. 생성된 성능 모델로 탈-설계점 성능 해석을 수행하여 그 결과를 엔진 성능 덱 데이터와 비교하였다. 한 점 스케일링 기법으로 생성된 성능 모델이 성능 덱 데이터와 다소 오차가 있음을 확인하고, 성능 모델의 정확성을 높이기 위한 보정이 필요하다고 판단하였다. 따라서 고압 스풀 회전수에 따른 작동점(탈-설계점) 별 스케일링 계수를 구하는 방식으로 보정 성능 모델을 생성하여 탈-설계점 해석을 수행하였다.

• 설비공학논문집
• /
• 제29권9호
• /
• pp.482-495
• /
• 2017

Degree-days are practically used as a tool to estimate energy consumption for heating and cooling. Degree-days are calculated by summing differences of balance point temperature and outside temperature for the analyzed period. Determining balance point temperature is a key point in calculating accurate degree-days. However, ASHRAE standards are used for balance point temperature in Korea because balance point temperature considering climate conditions and building thermal performance is not proposed in Korea. This study proposes the process to generate balance point temperature for heating degree-days considering Korean climate and building conditions. Also, a new balance point temperature for three regions in Korea will be suggested in this study. Balance point temperature of Seoul is approximately $15.0^{\circ}C$, lower than the current standard of $18.3^{\circ}C$. Balance point temperature of Seoul considering climate conditions and building performance can be different from the ASHRAE suggested value ($18.3^{\circ}C$). Results revealed the current standard for balance point temperature should be changed considering climate and building conditions in Korea.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3357-3368
• /
• 1994

Total pressure losses required to calculate the total-to-total efficiency are estimated by integrating empirical loss coefficients of four loss mechanisms along the mean-line of blades as follows; blade profile loss, secondary flow loss, end wall loss and tip clearance loss. The off-design points are obtained on the basis of Howell's off-design performance of a compressor cascade. Also, inlet-outlet air angles and camber angle are obtained from semi-empirical relations of transonic airfoils' minimum loss incidence and deviation angles. And nominal point is replaced by the design point. It is concluded that relatively simple loss models and Howell's off-design data permit us to calculate the off-design performance with satisfactory accuracy. And this method can be easily extended for off-design performance prediction of multi-stage compressors.

• 대한전자공학회논문지TC
• /
• 제43권11호
• /
• pp.95-117
• /
• 2006

본 논문에서는 IEEE 802.16e OFDMA/TDD 이동국 모뎀의 링크 성능과 복잡도 최적화를 위한 부동 및 고정 소수점 설계에 대하여 논한다. 부동 소수점 설계에서는 이동국 모뎀에서 하향링크 트래픽 채널의 채널 추정 방법을 제안하고, 모의실험을 통하여 최적의 알고리즘을 선정한다. 그리고 시간 및 주파수 동기화, Digital Front End와 CINR 추정 기법에 관하여 성능 향상과 시스템을 최적화하기 위한 알고리즘을 제안하고, 상향링크의 트래픽 채널과 제어 채널의 부동 소수점 설계 방법을 논한다. 제안된 알고리즘은 IEEE 802.16e OFDMA/TDD 시스템에 적용하여, 모의실험을 통한 성능을 Detection Probability, Mean Acqusition Time, PER 성능 그래프 등으로 그 우수성을 검증한다. 고정 소수점 설계에서는 부동 소수점 설계로부터 최적의 고정 소수점 설계를 위한 효율적인 방법론을 제시한다. 그리고 하향링크와 상향링크의 트래픽 채널, 시간 및 주파수 동기, DFE 블록을 고정 소수점 설계하고, 모의실험을 통하여 성능과 복잡도 간의 tradeoff 관계를 최적화한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.651-654
• /
• 1999

This paper investigates the varying characteristics of the performance degradation resulting from the different combination of wordlength in fixed-point implementation of recursive sinusoidal transform. The performance degradation is analytically derived in the form of noise-to-signal power ratio. The best wordlength combination is shown to be the equal length distribution of the given number of bits between the transform coefficients and the data. The analysis results are also verified through the computer simulations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.966-970
• /
• 2005

A Robot Performance Evaluation System(RPES) Program with auto extraction algorism was developed according to the ISO 9283 robot performance criteria. The developed program looks for order point automatically in data that get laser measurement Instrument and estimate performance of robot using this order point. In addition, this program estimates Each Joint Motion of robot. Robot Performance Evaluation System(RPES) Software was developed with Visual Basic satisfying the need of Hyundai Motor Company. The developed system was implemented on NACHI 8608 AM 11 robot. The resulted output shows the effectiveness of the developed system.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.349-357
• /
• 2005

We suggest a functional technique with loess smoothing for estimating the change-point when there is one change-point in the mean model. The proposed change-point estimator is consistent. Simulation study shows a good performance of the proposed change-point estimator in comparison with other parametric or nonparametric change-point estimators.