• 문화기술의 융합
• /
• 제8권5호
• /
• pp.399-407
• /
• 2022

기업은 기술력과 연구개발 등 다양한 기업들과 협력 및 네트워크를 형성하고 있지만, 효과적으로 적응 할 수 있는 기업의 다수 역량 확보가 절실하게 필요하다. 본 연구는 대구 지역에 위치한 중소기업들을 대상으로 기업의 전략적지향성, 기술혁신역량, 조직역량이 기업성과에 미치는 영향을 규명하였다. 설문조사는 2021년 9월 1일부터 11월30일까지 대구 기업 종사자를 대상으로 진행하였고 최종 분석에 활용된 사례는 총 183명이 활용되었다. 분석결과를 살펴보면 대구 기업들을 대상으로 다중회귀분석을 실시한 결과 독립변수 모두인 경영자의 전략적지향성, 기술혁신역량, 조직역량이 기업성과에 정(+)의 유의미한 영향을 미치는 것으로 나타났다. 이는 경영자의 마인드와 회사의 핵심기술 역량 및 기업의 조직 기업성과에 미치는 영향이 크기에 다양한 역량 기반 및 혁신 따른 교육과 R&D 향상을위해 노력해야한다고 볼 수 있다. 본 연구는 국가 및 지역 경제에 큰 영향을 미칠 수 있는 관련 중소기업들을 대상으로 기업의 전략지향성과 기술혁신역량, 조직역량이 기업성과에 미치는 영향의 중요성을 이해하고자 하였다.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1122-1130
• /
• 2001

Film cooling performance from two rows of holes with opposite orientation angles is evaluated in terms of heat flux ratio. The film cooling hole has a fixed inclination angle of 35°and orientation angle of 45°for the downstream row and -45°for the upstream row. Four film cooling hole arrangements including inline and staggered configurations are investigated. The blowing ratio studied was 1.0. Boundary layer temperature distributions are measured to investigate injectant behaviors and mixing characteristics. Detailed distributions of the adiabatic film cooling effectiveness and the heat transfer coefficient are measured using TLC(Thermochromic Liquid Crystal). For the inline configuration, there forms a downwash flow at the downstream hole exit to make the injectant well attach to the wall, which gives high adiabatic film cooling effectiveness and heat transfer coefficient. The evaluation of heat flux ratio shows that the inline configuration gives better film cooling performance with the help of the downwash flow at the downstream hole exits.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1131-1139
• /
• 2001

Experimental results are presented, which describe the effect of blowing ratio on film cooling from two rows of holes with opposite orientation angles. The inclination angle is fixed at 35°, and the orientation angles are set to be 45°for the downstream row, and -45°for the upstream row. The studied blowing ratios are 0.5, 1.0 and 2.0. The boundary layer temperature distributions are measured using thermocouple at two downstream locations. Detailed adiabatic film cooling effectiveness and heat transfer coefficient distributions are measured with TLC(Thermochromic Liquid Crystal). The adiabatic film cooling effectiveness and heat transfer coefficient distributions are discussed in connection with the injectant behaviors inferred from the boundary layer temperature distributions. Film cooling performance, represented by heat flux is evaluated from the adiabatic film cooling effectiveness and heat transfer coefficient data. The results show that the investigated geometry provides improved film cooling performance at the high blowing ratios of 1.0 and 2.0.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.99-106
• /
• 2017

Purpose: Most modern office buildings adopt the curtain wall system in order to provide occupants with the sense of openness and high-technology, which requires large window area. As a result, the amount of solar radiation increases, negatively affecting cooling load during the summer and increasing energy costs. However, the performance of window itself is not sufficiently controllable parameter to control thermal comfort and solar radiation. Therefore, a shading device such as venetian blind is required to control them and thus a variety of studies have been performed thus far. So, the purpose of this study is to improve the performance of blind through the development of blind control algorithm. Method: Among various input variables for the control of venetian blinds, the vertical solar radiation has been selected in this study as the primary input variable and the optimal control algorithm for venetian blinds were developed for each window orientation. Result: The developed optimal control algorithm has a positive effect on building energy savings.

• Computers and Concrete
• /
• 제16권5호
• /
• pp.759-774
• /
• 2015

This study simulates the flexural behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) beams reinforced with steel and glass fiber-reinforced polymer (GFRP) rebars. For this, micromechanics-based modeling was first carried out on the basis of single fiber pullout models considering inclination angle. Two different tension-softening curves (TSCs) with the assumptions of 2-dimensional (2-D) and 3-dimensional (3-D) random fiber orientations were obtained from the micromechanics-based modeling, and linear elastic compressive and tensile models before the occurrence of cracks were obtained from the mechanical tests and rule of mixture. Finite element analysis incorporating smeared crack model was used due to the multiple cracking behaviors of structural UHPFRC beams, and the characteristic length of two times the element width (or two times the average crack spacing at the peak load) was suggested as a result of parametric study. Analytical results showed that the assumption of 2-D random fiber orientation is appropriate to a non-reinforced UHPFRC beam, whereas the assumption of 3-D random fiber orientation is suitable for UHPFRC beams reinforced with steel and GFRP rebars due to disorder of fiber alignment from the internal reinforcements. The micromechanics-based finite element analysis also well predicted the serviceability deflections of UHPFRC beams with GFRP rebars and hybrid reinforcements.

• 센서학회지
• /
• 제28권1호
• /
• pp.30-35
• /
• 2019

Inertial measurement units (IMUs) are widely used for wearable motion-capturing systems in the fields of biomechanics and robotics. When the IMUs are combined with optical motion sensors (hereafter, OPTs) for their complementary capabilities, it is necessary to align the coordinate system orientations between the IMU and OPT. In this study, we compare the application of two coordinate transformation-based orientation alignment methods between two coordinate systems. The first method (M1) applies angular velocity coordinate transformation, while the other method (M2) applies gyroscopic angle coordinate transformation. In M1 and M2, the angular velocities and angles, respectively, are acquired during random movement for a least-square algorithm to determine the alignment matrix between the two coordinate systems. The performance of each method is evaluated under various conditions according to the type of motion during measurement, number of data points, amount of noise, and the alignment matrix. The results show that M1 is free from drift errors, while drift errors are present in most cases where M2 is applied. Thus, this study indicates that M1 has a far superior performance than M2 for the alignment of IMU and OPT coordinate systems for motion analysis.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.287-299
• /
• 2022

Rather than using smartphones as seismometers with designated locations and orientations, this study proposes to employ crowds' smartphones in buildings to perform fast safety assessment of buildings. The principal advantage of using crowds' smartphones is the potential to monitor the safety of millions of buildings without hardware costs, installation labor, and long-term maintenance. This study's goal is to measure the maximum interstory drift ratios during earthquake excitation using crowds' smartphones. Beacons inside the building are required to provide the location and relevant building information for the smartphones via Bluetooth. Wi-Fi Direct is employed between nearby smartphones to conduct peer-to-peer time synchronization and exchange the acceleration data measured. An algorithm to align the orientation between nearby smartphones is proposed, and the performance of the orientation alignment, interstory drift measurement, and damage level estimation are studied numerically. Finally, the proposed approach's performance is verified using large-scale shaking table tests of a scaled steel building. The results presented in this study illustrate the potential to use crowds' smartphones with the proposed approach to record building motions during earthquakes and use those data to estimate buildings' safety based on the interstory drift ratios measured.

• 지식경영연구
• /
• 제11권2호
• /
• pp.153-162
• /
• 2010

The knowledge of market and customer is widely accepted as one of the key information for the success of the business. To acquire market and customer knowledge, managers need to understand internal environment of their organization. Using data from Korean trading firms, this research aims to determine the internal environment of an organization enabling an effective acquirement of market and customer knowledge.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1867-1870
• /
• 2003

Since degraded region of input image can cause false minutiae which lead to decrease identification performance, use minutiae belong to only good quality to ensure true minutiae. This paper suggests image quality measuring method with respect to local and global orientation of ridges. In order to verify a suggested method, PDFs of quality indices derived by local and global feature are computed and then, classifying each image block using Bayesian decision theory.

• 벤처창업연구
• /
• 제17권1호
• /
• pp.121-137
• /
• 2022

본 연구의 목적은 하이테크 소셜벤처의 사회적·경제적성과에 영향을 미치는 요인을 실증적으로 규명하여, 하이테크 소셜벤처와 관련 생태계 이해관계자에게 필요한 성공 요인과 통찰력을 제시하는 데 있다. 선행연구에 근거하여 핵심기술역량, 핵심비즈니스역량, 소셜미션지향의 세 가지 성과요인 차원을 구성하였고, 각 하위요인으로 기술혁신지향성, R&D역량, 비즈니스모델, 고객지향성, 소셜네트워크, 소셜미션추구를 도출하였다. 실증분석을 위해 국내 하이테크 소셜벤처를 대상으로 설문조사를 진행하였고, 회수된 243부의 유효한 자료는 PLS-구조 방정식 분석을 통해 가설의 유의성을 검정하였다. 분석 결과, R&D역량, 고객지향성, 소셜네트워크, 소셜미션추구는 모두 사회적·경제적 이중성과에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 기술혁신지향성은 사회적·경제적성과에 모두 유의한 영향을 미치지 못하는 것으로 나타났는데, 이는 표본기업들의 기술혁신지향성이 추상적인 조직문화적 특성으로만 내재되었기 때문에 발생한 것으로 추정한다. 비즈니스모델은 사회적성과에만 유의한 영향을 미쳤는데, 이는 사회적기업을 위해 개발된 측정도구의 한계로 추정되며, 원인 파악을 위한 추가 다집단분석 결과도 이와같은 추정의 근거를 뒷받침해 주었다. 본 연구는 사회적경제 생태계에 새롭게 등장하고 있는 하이테크 소셜벤처를 식별하고 선제적으로 실증 연구를 진행함으로써 관련 연구분야의 토대를 마련하였으며, 사회적기업 및 소셜벤처의 성과요인 연구와 실증적 연구모형을 확장시키는 계기가 되었다고 판단한다. 그러나 연구 방법이나 과정에 있어서, 사회적·경제적 이중성과의 균형을 위한 요인 도출이나 검증, 주관적 측정 방법, 표본의 대표성 등의 한계가 있었다. 향후 한계를 보완하고 개선된 연구모형을 설계하여, 더욱 심도 있는 후속 연구가 이어지기를 기대한다.