• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.322-332
• /
• 2011

본 논문에서는 한일공동VLBI상관기(Korea-Japan Joint VLBI Correlator, KJJVC)의 핵심 구성시스템인 VLBI상관서브 시스템(VLBI Correlation Subsystem, VCS) 본제품의 1차 성능시험에 대해 기술한다. VCS 본제품의 1차 성능시험의 주요 목적은 현장에 설치하기 전에 제작사에서 다양한 시험항목을 대상으로 시험을 수행하여 문제점을 확인 후 전체 시스템의 완성도를 높이는 것이다. 이번 성능시험에서는 VCS 시작품에서 발견된 FFT 재양자화의 유효비트 부족으로 인한 오버폴로어 문제점을 포함한 기능적인 시험을 수행하였다. 이번 VCS 본제품의 공장시험을 통하여 2008년 VCS 시작품의 성능시험에서 발견한 FFT 의 재양자화 문제점이 완전히 해결되었으며 VCS 본제품에 지연추적, 지연보상, 주파수 묶음 등의 중요 기능도 추가되었다. 그리고 실제 관측 데이터(광대역/협대역)를 이용한 상관처리 시험에서도 예측되는 상관결과가 출력되는 것을 확인하였다.

• Tribology and Lubricants
• /
• 제20권4호
• /
• pp.183-189
• /
• 2004

The floating ring seal is used in an oxidizer and a fuel pump of the turbo pump unit in the liquid rocket engine to optimize a leakage without rubbing phenomenon. The damper floating ring seal, one of the floating ring seals, is with round hole pattern surfaces. It can reduce the leakage by increased friction factor that obtained from experimental data. In this paper, the leakage test about floating ring seal and damper floating ring seal was conducted. The test result showed the leakage performance of damper floating ring seal was better than the leakage performance of floating ring seal. With the leakage test the lock-up and rotation test about seal was conducted and that position is measured. The relatively large lock-up eccentric ratio was obtained from the test result of damping floating ring seal. The attitude angle of seal increases with increasing of shaft rotation.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.100-107
• /
• 2000

The hydraulic couplings have been widely used in industries, automobile, and power-station drives including ships. A mathematical analysis by which the design and application of hydraulic couplings are made is used in conventional design formulae and general roto-dynamic theories. The fluid flow of hydraulic couplings can be considered to have two component, one circumferentially about the coupling axis, and the other passing fluid from the pump to the turbine in the plane of the coupling axis. Tests have been carried out on the full-scale production coupling. The performance test consists of taking measurement of torque of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft. The purpose of this research is to construct the experimental test equipments and to establish a series of performance test for the domestically developed hydraulic couplings, and to obtain experimental results which can be used to improve the performance of the hydraulic coupling and to solve the practical problems confronted in operation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권7호
• /
• pp.406-411
• /
• 2000

This paper presents the results of performance confirmation tests for domestic 20 [Ton] transmission suspension insulators which will be widely utilized in transmission lines. The new test methods such as power arc test, steep-front-of-wave flashover voltage test, and etc. which have been only utilized for the distribution insulators were applied in transmission suspension insulators. The properties of metal and cement used in the 20 [Ton] transmission insulators were also evaluated by the various analysis techniques. Based on the results, we evaluated the performance of the transmission suspension insulators.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.668-671
• /
• 2001

For the saving of energy consumption, it is necessary that the high efficient energy transfer machine. We found the optimum operating condition of screw water chiller during this performance test. The specifications of compressor for this performance test are as follows. Built-in volume ratio; Vi=2.4, using refrigerant; HCFC-22, nominal motor output; 60kW(80Hp). We found the test results on water cooled chiller standard test condition that the evaporating capacity is increased 8% maximum and 5.6% under same operating condition. and COP is increased 11 % max. and 8% under same operating condition with change of the evaporating inlet/outlet condition. For the results of these test, we can estimate the optimum operating condition of water cooled type screw chiller.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.855-856
• /
• 2008

In this paper, we studied the performance evaluation of a vehicular rear-view camera through quantifying the image quality based on several objective criteria from the ISO (International Organization for Standardization). In addition, various experimental environments are defined considering the conditions under which a rear-view camera may need to operate. The process for evaluating the performance of a rear-view camera is composed of five objective criteria: noise test, resolution test, OECF (opto-electronic conversion function) test, color characterization test, and pincushion and barrel distortion tests. The proposed image quality quantification method then expresses the results of each test as a single value, allowing easy evaluation.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.163-166
• /
• 2003

This paper presents the results of a series of performance tests for the Stilting cryocooler. Infrared sensor systems incorporating cryocoolers are required to be qualified to the appropriate environmental specification. Linear drive Stilting cryocooler have matured to the stage of undergoing formal qualification test program The thermal environmental test of the Stilting cryocooler is presented in this paper. We performed that low and high temperature keeping test from －4$0^{\circ}C$ to ＋6$0^{\circ}C$ and operating test at high and low temperature cyclic range with acceptance tests performed at scheduled intervals. Cooling capacity was determined as a function of cooler components temperatures at the compressor, hot end and cold tip. Tests performed on this cooler have been successful with a measured cooling performance of more than 0.8W＠80K for 23$^{\circ}C$ ambient temperature with 40 $W_{ac}$ input power.

• 한국재난정보학회 논문집
• /
• 제13권3호
• /
• pp.358-365
• /
• 2017

전세계적으로 재난에 의한 피해가 급증하면서 인명피해를 줄이기 위한 장비에 대한 기술 개발이 필요한 실정이다. 이에 소방안전 및 119구조 구급기술연구개발사업의 지원으로 "인명구조용 소방대원 근력지원장치 개발(2015 ~ 2018)" 과제를 통하여 재난환경 및 재난 대응 시나리오를 고려한 리프팅 성능(양중하중 100 kg 이상, 양중높이 1 m 이상, 양중거리 60 cm 이상, 양중속도 0.2 m/s 이상)을 만족하는 장비를 개발 중에 있다. 본 연구는 장치의 유용성을 판단하기 위해 양중성능 및 내환경 시험법을 제안하였고, 양중성능시험의 동역학 해석을 통해 근력지원장치의 상세사양을 분석 및 검증하였다. 본 연구를 통하여 제안한 시험 방법은 근력지원장치의 안정적인 성능 구현여부를 평가하는데 실용적으로 적용할 수 있을 것으로 판단된다.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.818-826
• /
• 2001

In this study, in-situ performance test of a wet surface finned-tube evaporator of an air source heat pump which has a rating capacity of 20RT is carried out. Since test conditions, such as indoor and outdoor air conditions cannot be controlled to satisfy the standard test conditions, experiments are done with the inlet air conditions as they exist, From the experimental data, air side heat and mass transfer coefficients were calculated by the well known heat and mass transfer analogy and tube-by-tube method. since current procedure underpredicted the experimental sensible heat factor(SHF), a proper empirical parameter was introduced to predict the experimental data with satisfactory results. This study provides the method of evaluating the heat and mass transfer coefficients of a wet surface finned-tube evaporator of which in-situ performance test in necessary.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.427-430
• /
• 2002

The present parer outlines the system identification and vibration control performance of air traffic control tower of Yangyang international airport with tuned mass damper(TMD). From the free vibration test, natural frequency, damping ratio and mode shape of tower are obtained and these values are compared with the values from numerical analysis. In the vibration control test to evaluate the vibration control performance, equivalent damping ratio increased by tuned mass damper are obtained in case the TMD is operated as passive mode. Damping ratio of tower evaluated from free vibration test is about $1.0{\%}$. It is very low value than damping ratio recommended in general code. Damping ratio of passive mode is about $5{\%}$. These equivalent damping ratio increased by TMD is enough to enhance the serviceability of tower structure under wind load.