• 제목/요약/키워드: performance of experiment

검색결과 9,025건 처리시간 0.037초

항상화제와 산패지방이 육계의 생산성에 미치는 영향 (Effect of Antioxidants and Oxidized Fat on the Performance of Broiler Chicks)

  • 남궁환;스티브리슨;백인기
    • 한국가금학회:학술대회논문집
    • /
    • 한국가금학회 2000년도 제17차 정기총회 및 학술발표
    • /
    • pp.36-53
    • /
    • 2000
  • Five experiments were conducted to investigate the effects of antioxidants(Santoquin and Oxiban) using fresh or oxidized fat on the performance of broiler chicks. Day-old broiler chicks (except for Experiment 5 in which 6-d-ol birds were given experimental diets for 10 d) were fed diets containing fresh or oxidized fat (animal-vegetable fat blend in Experiments 1, 4, and 5 and corn oil in Experiments 2 and 3) with or without graded concentrations of Santoquin (0,250, 500 ppm in Experiments 1 and 2 and 0, in Experiment 4 and 400 ppm with 0.1% lipase in Experiment 5) of 2wk. In all experiments, birds fed fresh fat gained more weight, had better feed/gain, together with higher AME$_{n}$ and apparent fat digestibility (Experiments 1 and 2) than birds fed oxidized fat(P<0.05). There was no interaction among fat sources and antioxidants on the performance of chicks in any experiment. In Experiment 3, Santoquin more than 200 ppm resulted in a reduction in weight gain and feed intake(P<0.05). The livers of chicks fed oxidized fat in Experiments 2 and 5 had higher malondialdehyde (MDA) values (P<0.05) Chicks fed oxidized fat with 250 ppm Santoquin in Experiment 2 had lower liver MDA values, although this situation did not occur in Experiments 1, 4, and 5. These results indicate that antioxidant supplements can alleviate most deleterious effects of feeding oxidized fat and that supplementation of Santoquin more than 200 ppm has a negative effect on the performance of broiler chicks.s.

  • PDF

친환경 점토질 다공블럭 벽체의 열성능 분석 연구 (A Study on Thermal Performance Analysis of the Sustainable Clayed Hollow Block Wall)

  • 장용성;박효순
    • KIEAE Journal
    • /
    • 제4권3호
    • /
    • pp.65-70
    • /
    • 2004
  • The purpose of this study is to analysis the thermal performance of the clayed hollow block wall. Its thermal performance was evaluated comparison with the cement block wall, it was generally used in building envelope. To that end, we conducted a insulation performance experiment and heating and cooling load simulation for a respective wall. In addition, we calculated a construction cost for each other's wall. The results of this study can be summarized as follows. (1) According to experiment of a insulation performance, coefficient of overall heat transmission of the cement block wall and clayed hollow block wall was calculated respectively $2.72W/^2K$ and $1.42W/^2K$. (2) The annular load saving of the clayed hollow block wall was evaluated 1.5% larger than its of the cement block wall. (3) The construction cost of the clayed hollow block wall was calculated 73% more expensive than its of the cement block wall. (4) The construction cost of the clayed hollow block composite wall was calculated 13.7% more expensive than its of the cement block composite wall.

편측창에서 창개구부의 형상이 천공상태별 채광성능에 미치는 영향 (Effects of Different Fenestration Configurations on Daylighting Performance in Unilateral Window under Clear and Overcast Sky Conditions)

  • 술타나 아즈미리;김정태
    • KIEAE Journal
    • /
    • 제9권5호
    • /
    • pp.105-113
    • /
    • 2009
  • Daylighting provides the opportunity for both energy savings and improved visual comfort. An accurate estimation of the amount of daylight entering a building is the key step for daylight designing. This research aims to assess comparative daylighting performance of four different configurations of fenestration in case of unilateral windows and their variation under clear and overcast sky conditions. The selected window openings in this study were single punched, double punched, multiple punched and clerestory, and the area was same for each type of window. The experiment was designed for an office space using 1/10 scale model. Daylighting performance was evaluated by measuring the illuminance on work-plane height using Agilent data logger and photometric sensor Li-Cor. Thecomputer program ECOTECT was also used to simulate the pattern of interior illuminance distribution. Clerestory window showed the best performance in term of both illuminance level and distribution in the experiment. Multiple punched window provided more uniform illuminance distribution than single punched window. Lowest daylighting performance in the experiment was shown by double punched window.

통계적 실험계획법을 이용한 액정표시기용 다결정 실리콘 박막트랜지스터의 최적화 설계 (Robustic design of poly-Si TFT for LCD using statistical design of experiment)

  • 이현중;배경진;이종근;박세근
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.507-510
    • /
    • 1998
  • Performance of AMLCD pixels depends on the electrical characteristics of thin film transistor switches. The high quality of LCD can be obtained by minimizing the process and device variations of TFT. The effect of process and device factors on poly-Si TFT characteristics are calculated by ATHENA and ATLAS, and the optimized design windows based on statistical design of experiment are suggested for high performance 20 inch LCD are suggested for high performance 20 inch LCD monitors.

  • PDF

자기베어링과 공위한 축전센서의 설계 및 성능 평가 (The Design and Performance Verification of Collocated Capacitance Sensor for Magnetic Bearing)

  • 유선중;신동원;김종원
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1994년도 추계학술대회 논문집
    • /
    • pp.317-322
    • /
    • 1994
  • The design and performance verification of collocated capacitance sensor system for magnetic bearing is presented. Noncollocation between actuators and sensors may cause unstable rotor behavior. The capacitance sensor is not affected by magnetic field. PCB type capacitance sensor is installed between magnetic bearing polse. so, collocation of sensors and actuators can be achieved. Experiment of sensor's static and dynamic charactistics is conducted. Modeling of the rotor system supported by magnetic bearing is made. And performance comparison between simulation and experiment is showed.

  • PDF

분말 특성에 따른 자기연마에 의한 Deburring성능분석 (Analysis of the Performance of Magnetic Abrasive Deburring according to Powder Characteristics)

  • 채종원;고성림
    • 한국정밀공학회지
    • /
    • 제21권12호
    • /
    • pp.37-43
    • /
    • 2004
  • The performance of magnetic abrasive finishing fur surface is evaluated by the characteristic curve. The characteristic curve is generated by experiment in surface finishing. For experiment, new magnetic inductor is designed and manufactured. 15 kinds of powders are provided to find the relationship between powder characteristic and finishing performance. As powder, Fe-TiC. Polymer-TiC and Fe-NbC are used with different size. The size of abrasives and location are also important factor for the performance. From characteristic curve, two index are obtained, which specify the initial finishing performance and endurance of finishing performance. It is proved that the performance index can be applied to select proper powder for efficient deburring. It is shown that the characteristic curve can be used as good tools for evaluating powder performance in surface finishing and deburring.

초등학교 과학탐구력 측정을 위한 수행평가 도구 개발 (Development of Performance Assessment of Scientific Inquiring Ability in Elementary School)

  • 한광래;김정길;김해경;남철우;송판섭;은경용
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제17권2호
    • /
    • pp.11-22
    • /
    • 1998
  • The present educational and social circumstances require the improvement of science education and the promotion of scientific technology simultaneously Under this situation, it is necessary to develop the performance assessment evaluating the ability of scientific inquiry. The purpose of this study is to develop a valid and reliable instrument of the performance assessment that is can evaluate the scientific inquiring ability. The characteristics of the instrument developed through this study, are as follows, 1. The performance assessment can be impartially achieved for all the elements of scientific inquiry, which are required in the units of elementary science from 3rd to 6th grade of elementary school. 2. To maintain the objectivity of performance assessment, the detailed standpoints and standards are established. 3. The instruments are devised to evaluate the thinking skills with the experimental reports of student, the operation skills by the check list of evaluation that the teacher's observation for the student are recorded. 4. Considering the level of elementary school student, the items required the complex thinking and the investigative skills are exclude as much as possible. 5. The items are arranged according to the learning steps of elementary school, so that the evaluation may be achieved in parallel with the process of the real teaching -learning in class. 6. According to circumstances, make use of these materials for the evaluation as the practical teaching-learning materials instead of the normal teaching-learning materials The first field trial with the instrument was carried out, using a sample of 20 students from the 3rd to 6th at K and Y elementary school located in Kwangju city. The results of mean achievement quotient for each grade are as follows, the first term of 3rd grade (experiment and exercise skills ; 85%, inquiry thinking skills ; 74%), the second term of 3rd grade (experiment and exercise skills : 81%, inquiry thinking skills ; 76%), the first term of 4th grade (experiment and exercise skills ; 70%, inquiry thinking skills ; 59%), the second term of 4th grade (experiment and exercise skills ; 61%, inquiry thinking skills ; 71%), the first term of 5th grade (experiment and exercise skills ; 84%, inquiry thinking skills ; 67%), the second term of 5th grade (experiment and exercise skills; 73%, inquiry thinking skills ; 70%), the first term of 6th grade (experiment and exercise skills : 83%, inquiry thinking skills ; 84%), the second term of 6th grade (experiment and exercise skills ; 87%, inquiry thinking skills ; 81%).

  • PDF

K-means 알고리즘 기반 클러스터링 인덱스 비교 연구 (A Performance Comparison of Cluster Validity Indices based on K-means Algorithm)

  • 심요성;정지원;최인찬
    • Asia pacific journal of information systems
    • /
    • 제16권1호
    • /
    • pp.127-144
    • /
    • 2006
  • The K-means algorithm is widely used at the initial stage of data analysis in data mining process, partly because of its low time complexity and the simplicity of practical implementation. Cluster validity indices are used along with the algorithm in order to determine the number of clusters as well as the clustering results of datasets. In this paper, we present a performance comparison of sixteen indices, which are selected from forty indices in literature, while considering their applicability to nonhierarchical clustering algorithms. Data sets used in the experiment are generated based on multivariate normal distribution. In particular, four error types including standardization, outlier generation, error perturbation, and noise dimension addition are considered in the comparison. Through the experiment the effects of varying number of points, attributes, and clusters on the performance are analyzed. The result of the simulation experiment shows that Calinski and Harabasz index performs the best through the all datasets and that Davis and Bouldin index becomes a strong competitor as the number of points increases in dataset.

THE SUBSTITUTABILITY OF MAIZE WITH CASSAVA ROOT AND LEAF MEAL MIXTURE IN BROILER DIETS

  • Ochetim, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제5권4호
    • /
    • pp.605-610
    • /
    • 1992
  • Two experiments were conducted to investigate into the effects of replacing maize with a mixture of cassava root and leaf meal (CRLM) on the performance of broiler chickens. In experiment 1, CRLM replaced 50 or 100 percent of maize in the control diet. In experiment 2, the 100 percent CRLM based-diet was fortified at a further 3 percent level with coconut oil. A total of 180, one-day old Shaver Starbro chicks, raised up to 49 days of age, were used. There were no significant (p<0.05) differences in final body weights, feed intake and feed efficiency between the control group and the group fed the diet in which 50 percent of the maize was replaced with CRLM. At the 100 percent level of replacement of maize with CRLM, however, final body weights, feed efficiency and carcass yields, were significantly (p<0.05) reduced. Dressing percentage and feed intake were not affected (p>0.05) by level of substitution of maize with CRLM. In experiment 2, when the diet in which all of the maize was replaced with CRLM was fortified with coconut oil at an additional 3 percent level, broiler performance improved and equaled (p=0.05) that obtained on the control maize diet. It was concluded the CRLM can replace 50 percent of maize in broiler diet without adversely affecting performance. However, for the complete replacement of maize with CRLM, it is necessary to further supplement such a diet with a high energy density ingredient if broiler performance is to be maintained.