• Environmental and Resource Economics Review
• /
• v.13 no.1
• /
• pp.1-32
• /
• 2004

Environmental Performance Index(EPI) has shown some limitation. Since it has lack of analysis for the relation between environmental performance and business performance, and public information. Therefore it could not provide valuable information for the shareholders to decide for the investment. In this paper by using Analystic Hierarchy Process (AHP), EPI was calculated giving some weighted scale for each environmental items. Improvement of pollution treatment, general management data such as EMS system, and environmental improvement for the products and process were the main three items when decision makers in bankings are considering the investment for a company. In empirical case, companies which has Environmental-Friendly Coorperation Award from MOE and ISO 14001 certification had shown strong relation between business performance and environmental performance.

• Smart Structures and Systems
• /
• v.19 no.5
• /
• pp.487-497
• /
• 2017

Semi-active devices use the building's own motion to produce resistive forces and are thus strictly dissipative and require little power. Devices that independently control the binary open/closed valve state can enable novel device hysteresis loops that were not previously possible. However, some device hysteresis loops cannot be obtained without active analog valve control allowing slower, controlled release of stored energy, and is presents an ongoing limitation in obtaining the full range of possibilities offered by these devices. This in silico study develops a proportional-derivative feedback control law using a validated nonlinear device model to track an ideal diamond-shaped force-displacement response profile using active analog valve control. It is validated by comparison to the ideal shape for both sinusoidal and random seismic input motions. Structural application specific spectral analysis compares the performance for the non-linear, actively controlled case to those obtained with an ideal, linear model to validate that the potential performance will be retained when considering realistic nonlinear behaviour and the designed valve control approach. Results show tracking of the device force-displacement loop to within 3-5% of the desired ideal curve. Valve delay, rather than control law design, is the primary limiting factor, and analysis indicates a ratio of valve delay to structural period must be 1/10 or smaller to ensure adequate tracking, relating valve performance to structural period and overall device performance under control. Overall, the results show that active analog feedback control of energy release in these devices can significantly increase the range of resetable, valve-controlled semi-active device performance and hysteresis loops, in turn increasing their performance envelop and application space.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.107-112
• /
• 2016

This paper proposes the improving the equalization performance using the variable step size in the S-MMA (Sliced-Multi Modulus Algorithm) equalization algorithm in order to minimize the effect of intersymbol interference which occurs at the nonlinear transfer function of communication channel. The S-MMA were showned for the improving the steady state equalization performance and misadjustment compared to the MMA present algorithm, this two algorithm has a limitation of performance improvement due to the adapting the fixed step size according to the error signal amplitude. In order to solving the abovemensioned problem, the proposed algorithm was adopting the variable step size proportional to the error signal amplitude and the computer simulation was performed for showing the performance improving. As a result of simulation, the proposed VSS S-MMA algorithm has more superior equalization performance compared to the present S-MMA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.378-390
• /
• 2001

In this paper, it is analyzed that the error performance of a Multi-Carrier DS-CDMA system in a single cell with multipath Rician fading and multiple access interference (MAI) and the error performance of the system is compared with that of a Sing1e-Carrier DS-CDMA system. Moreover, the convolutional coding techniques with code rate of 1/2, 1/3, and 1/4 are adopted in order to improve the error performance degraded by the multipath fading and MAI and performance improvement through the coding techniques is analyzed. As a result, it is shown that the number of users in each system can be determined by the number of branches of the rake receiver in a Single-Carrier DS-CDMA system and the number of carriers in a Multi-Carrier DS-CDMA system. Furthermore, the convolutional coding should be chosen with considering the trade-off between coding gain and a power limitation in a Multi-Carrier DS-CDMA system. In case of increasing the number of carriers, the processing gain is decreased but the error performance is improved through the effect of frequency diversity and the system can be possibility implemented due to the low chip rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.866-869
• /
• 2015

With the advance in semiconductor technology, the number of elements that can be integrated in system-on-chip(SoC) increases exponentially, and thus voltage scaling is indispensable to enhance energy efficiency. Near-threshold voltage computing(NTC) improves the energy efficiency by an order of degree, hence it is able to overcome the limitation of conventional super-threshold voltage computing(STC). Although NTC-based low performance manycore system can be used to maximize energy efficiency, it demands more number of cores to sustain the performance, which results in considerable increase of area. In this paper, we analyze NTC manycore architecture considering the trade-offs between performance, power, and area. Therefore, we propose an algorithmic methodology that can optimize power consumption and area while satisfying the required performance by determining the constrained number of cores and size of caches and clusters in NTC environment. Experimental results show that proposed NTC architecture can reduce power consumption by approximately 16.5 % while maintaining the performance of STC core under area constraint.

• International Area Studies Review
• /
• v.16 no.1
• /
• pp.327-349
• /
• 2012

This paper examined the strategic inward foreign direct investment and business performance in free economic zone. attractive of segment and country's competitive advantage were as proxy for the matrix of appropriateness. The marketing differentiation, inducement promotion, incentive, and business support were as proxy for the business performance. Based on the analysis of one hundred twenty cases, the following results were found. First, based on the attractive of segment and country's competitive advantage, the types of four segments was drawn. Second, the segment 4 have a significantly difference on their business performance. Third, strategic foreign direct investment have a significantly high difference on their marketing differentiation but a significantly low difference on their business support. Finally, the business performance, in order of performance, have a significantly difference on their marketing differentiation, inducement promotion, incentive, and business support. Limitation and suggestions for further are also highlighted.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1338-1347
• /
• 2018

In this study, Ti-mesh based electrodes were fabricated for the application of anode to the electrolysis process for wastewater treatment using Pd electroless plating method. The removal performance of the prepared Pd / Ti-mesh electrode was evaluated as representative dye RO16, and the durability and performance were maximized by varying the electrode manufacturing conditions. As a result, it was confirmed that the coating condition had no significant effect on the performance, and that the heat treatment process greatly affected the performance and the durability was improved. In addition, we tried to maximize performance and durability by complexing Ir, Ru, and Ta. However, as the thickness of the layer increased due to the limitation of the coating method, the resistance increased and the performance decreased accordingly.

• Journal of Broadcast Engineering
• /
• v.28 no.3
• /
• pp.267-274
• /
• 2023

There is a problem that the size of the dataset is insufficient due to the limitation of the collection of the medical image public data, so there is a possibility that the existing studies are overfitted to the public dataset. In this paper, we compare the performance of eight (Unet, X-Net, HarDNet, SegNet, PSPNet, SwinUnet, 3D-ResU-Net, UNETR) medical image semantic segmentation models to revalidate the superiority of existing models. Anatomical Tracings of Lesions After Stroke (ATLAS) V1.2, a public dataset for stroke diagnosis, is used to compare the performance of the models and the performance of the models in ATLAS V2.0. Experimental results show that most models have similar performance in V1.2 and V2.0, but X-net and 3D-ResU-Net have higher performance in V1.2 datasets. These results can be interpreted that the models may be overfitted to V1.2.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.1-16
• /
• 2020

The APEX model has been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. Recently, a key component of APEX application, named APEX-Paddy, has been modified for simulating water quality by considering paddy rice management practices. In this study, the performance of the APEX-Paddy model was evaluated using field data at Iksan experimental paddy sites in Korea. The discharge and pollutant load data during 2013 and 2014 were used to both manually and automatically calibrate the model. The APEX auto-calibration tool (APEX-CUTE 4.1) was used for model calibration and sensitivity analysis. Results indicate that APEX-Paddy reasonably performs in predicting runoff discharge rate and nitrogen yield. However, sediment and phosphorus yield is not correctly predicted due to the limitation of model schemes. With APEX-Paddy, the performance in reproducing the discharge and nitrogen yield is found to be a satisfactory level after manual calibration. The manually calibrated model performed better than the automatically calibrated model in nearly all comparisons. For runoff, manual calibration reduced PBIAS while R² and NSE values of the automatically calibrated model were the same as the manual calibration. For T-N, NSE and PBIAS were reduced when using manual calibration, whereas R² value was the same as manual calibration. The limitation of the APEX-Paddy model for predicting sediment, as well as the phosphorous yield, was discussed in this study.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1931-1942
• /
• 2021

As the utility of an optical satellite image with a high spatial resolution (i.e., fine-scale) has been emphasized, recently, various studies of the land surface monitoring using those have been widely carried out. However, the usefulness of fine-scale satellite images is limited because those are acquired at a low temporal resolution. To compensate for this limitation, the spatiotemporal data fusion can be applied to generate a synthetic image with a high spatio-temporal resolution by fusing multiple satellite images with different spatial and temporal resolutions. Since the spatio-temporal data fusion models have been developed for mid or low spatial resolution satellite images in the previous studies, it is necessary to evaluate the applicability of the developed models to the satellite images with a high spatial resolution. For this, this study evaluated the applicability of the developed spatio-temporal fusion models for KOMPSAT-3A and Sentinel-2 images. Here, an Enhanced Spatial and Temporal Adaptive Fusion Model (ESTARFM) and Spatial Time-series Geostatistical Deconvolution/Fusion Model (STGDFM), which use the different information for prediction, were applied. As a result of this study, it was found that the prediction performance of STGDFM, which combines temporally continuous reflectance values, was better than that of ESTARFM. Particularly, the prediction performance of STGDFM was significantly improved when it is difficult to simultaneously acquire KOMPSAT and Sentinel-2 images at a same date due to the low temporal resolution of KOMPSAT images. From the results of this study, it was confirmed that STGDFM, which has relatively better prediction performance by combining continuous temporal information, can compensate for the limitation to the low revisit time of fine-scale satellite images.