• The KIPS Transactions:PartD
• /
• v.18D no.3
• /
• pp.157-168
• /
• 2011

Recently flash memory has been being utilized as a main storage device in mobile devices, and flashSSDs are getting popularity as a major storage device in laptop and desktop computers, and even in enterprise-level server machines. Unlike HDDs, on flash memory, the overwrite operation is not able to be performed unless it is preceded by the erase operation to the same block. To address this, FTL(Flash memory Translation Layer) is employed on flash memory. Even though the modified data block is overwritten to the same logical address, FTL writes the updated data block to the different physical address from the previous one, mapping the logical address to the new physical address. This enables flash memory to avoid the high block-erase cost. A flashSSD has an array of NAND flash memory packages so it can access one or more flash memory packages in parallel at once. To take advantage of the internal parallelism of flashSSDs, it is beneficial for DBMSs to request I/O operations on sequential logical addresses. However, the B-tree structure, which is a representative index scheme of current relational DBMSs, produces excessive I/O operations in random order when its node structures are updated. Therefore, the original b-tree is not favorable to SSD. In this paper, we propose AS(Always Sequential) B-tree that writes the updated node contiguously to the previously written node in the logical address for every update operation. In the experiments, AS B-tree enhanced 21% of B-tree's insertion performance.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.133-140
• /
• 1998

The following conclusions are based upon data collected and visual observations made during the performance of the tests : 1. The performance of the erosion control products tested was for a particular set of conditions, and may be expected to differ if any or all of the test parameters were to be changed. If even just one parameter is changed from one test to the next, the results can be expected to be different. 2. Due to the fact that only two replications of each product were tested, we believe that the results presented herein are indicative only and not conclusive. 3. The ECB SC produced the least amount of soil erosion followed by ECB S, ECB C, and Coir No. 2, in that order. 4. All of the erosion control blankets tested significantly reduced soil erosion rates with respect to the bare soil controls. 5. The ECB S produced the smallest water runoff rate, followed closely by ECB SC. Next in order were ECB C and Coir No. 2. 6. All of the erosion control blankets reduced the water runoff rate with respect to the bare soil control. 7. Mesh 2cm There was not much difference in plant height for the four erosion control blankets and the bare soil control plots. the ECB S produced slightly taller plants than the rest of the materials tested. 8. The four erosion control blankets(ECB C, ECB SC, ECB S, and Coir No. 2) produced a larger plant mass than the bare soil plots. The difference between the plant mass for the four erosion control blankets, however, is minimal. 9. The ECB C produced the least percentage of lost seed and the largest percentage of germinating seed. 10. The ECB SC had the second smaller percentage of seed lost, followed closely by ECB S, and then by Coir No. 2. 11. All erosion control blankets had a smaller percentage of seed lost than the bare soil control plots. 12. The ECB C had the second largest percentage of germinating seed, followed closely by ECB SC and Coir No. 2. 13. All erosion control blankets had a larger percentage of germinating seed than the bare soil control plots. 14. The ECB C had the smallest percentage of non-germinating seed, followed by ECB S, Coir No. 2, and ECB SC, in that order. 15. All erosion control blankets had smaller percentages of non-germinating seed than the bare soil control plots.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.1-22
• /
• 2008

The purpose of this research is to clarify the elements of the function of the role of industrial high schools that its experts perceived. The content of this research is verify the function element required for the performance of the role of specialized education through content validity ratio(CVR). This research adopted the method of literature research and Delphi method, which is to collect and come to an agreement of the opinions of the 26 research panels. The first round is constructed by the semi-constructed questionnaire for the analysis of the opinions of the panels by inductive method. The second round is to categorize the result of the first one into 7 domains, and asked each category by Likert's 5 scale checklists, and statistically analyzed mean, medium, standard deviation, and quartile. The third round is to statistically analyze Mean, standard deviation, medium, and validity ratio(CVR) to reassure the opinions of the panels on the basis of the result of the first one. The categorized contents of the function required for the performance of the specialized education in this research is 'in-service visit and in-service training', 'licence acquiring education', 'employment counseling and job employment information', 'custom-made education connected with industry', 'career education' and 'enhancement of basic career competency'. The panels are divided into professors, teachers, professionals, and policy administrators, and they verified the validity rate of the function role and priority of emphasis. The result showed that the tendency of the education is converting from physical function-centered education to education of emotional attitude and competence of thought.

• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.61-66
• /
• 2005

This experiment was conducted to compare the influences of dietary sea urchin shell powder (SUSP) supplemented to broiler diets on performance, mineral contents and blood cholesterol for 5 weeks. The experimental diets contained 21.5 and $19\%$ CP for the starting and finishing period, respectively The ME was 3,100 kcal/kg of feed in both starter and finisher diets. One hundred sixty chicks were assigned to 4 treatments with 4 replicates and fed one of 4 experimental diets containing different levels of SUSP: 1) Control (commercial feed) 2) T1 (commercial feed with $1\%$ SUSP) 3) T2(commercial feed with $3\%$ SUSP) 4) T3(commercial feed with $5\%$ SUSP). Body weight gain was higher in the T1 group when fed the starter diet (P<0.05), but was the lowest in T1 group for finishing period. Feed efficiency was not significantly different between the control and treatment groups (P>0.05). The total cholesterol of the control was higher than the treatment groups and the HDL-cholesterol were higher in T2 and T3. However, effects of diets containing graded levels of SUSP on LDL-cholesterol and triglyceride contents were not found (P>0.05). The SUSP diets were increased significantly the Fe, Zn and Ca contents of chicken meat, and tended to increase total mineral contents. In conclusion, dietary supplementation of SUSP to broiler diets could be applied to the enhancement of Ca, Fe and total mineral contents levels in chicken meat.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.292-300
• /
• 1996

Hexavalent chromium($Cr^{+6}$) compounds are considered to be particularly hazardous, primarily because of the associated risk of allergic reaction and cancer. The analytic method of hexavalent chromium such as the s-diphenylcarba-zide(DPC) method and all ether previously used methods are often made uncertain due to significant interferences from organic components. This report can provide a technique for the more rapid and simple determination of total hexavalent chromium. than other currently using methods. The s-diphenylcarbazide method proposed by the U.S. National Institute for Occupational Safety and Health has low recovery rate(15.67 - 48.20%) due to interference, iron chloride and nickel chloride. A microwave oven technique has high recovery rate(about 70%) of insoluble hexavalent chromium. For the difference of ionic charges of $Cr^{+3}$-ethylenediamine tetraacetic acid(EDTA) chelate and $CrO_4{^{-2}}$, we could detect them simultaneously by ion exchanged high performance liquid chromatography. The confirmation of $Cr^{+3}$ and $Cr^{+6}$ were checked by fraction collector and flameless atomic absorption spectrometer. We observed that the small amount of hexavalent chromium is converted to trivalent chromium due to enhancement of chromium reduction by $Fe^{+3}$ or $Ni^{+2}$. As a result of this study, on the analysis of insoluble hexavalent chromium with microwave oven was used for, it may be better and more precise analysis after pretreatment by 2% NaOH-3% $Na_2CO_3$ and then analysis UV-spectrophotometer. It should be done for various studies on insoluble hexavalent chromium on the basis work environmental monitoring so called welding, painting etc.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.645-653
• /
• 2013

Seoul National University flap(SNUF) blade is a small-scale rotor blade incorporating a small trailing-edge flap control surface driven by piezoelectric actuators at higher harmonics for vibration attenuation. Initially, the blade was designed using two-dimensional cross-section analysis and geometrically exact one-dimensional beam analysis, and its material configuration was finalized. A flap-deflection angle of ${\pm}4^{\circ}$ was established as the criterion for enhanced vibration reduction based on an earlier simulation. The flap-linkage mechanism was designed and static bench tests were conducted for verifying the performance of the flap-actuation mechanism. Different versions of test beds were developed and tested with the designed flap and the selected APA 200M piezoelectric actuators. Through significant improvements, a maximum deflection of ${\pm}3.7^{\circ}$ was achieved. High-frequency experiments were conducted for evaluating the performance, and the transfer function of the test bed was determined experimentally. With the static tests almost complete, the rotor power required for testing the blade in a whirl tower (centrifugal environment) was calculated, and further preparations are underway.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.3
• /
• pp.153-163
• /
• 2008

Domestic construction industry accounts about 15% of Gross Domestic Product(GDP) and Korean government spends approximately 50 trillion won per year for public infrastructure projects. Effective management of public construction projects would result in cost saving and enhance financial stability of the government. In doing so, the government promoted a new budgeting system, Continual Budget Method(CBM) as a part of public project performance enhancement program published in 1999. This research mainly attempted to investigate and analyze the impact of new budgeting in term of cost and schedule performance. Based on the analysis result of n2 projects. The new budgeting system could save project cost by 9.83y. Due to the saving of indirect costs from reduction. Although limited government budget cannot allow all the projects to be excuted with the new budgeting system, the new budgeting system should be more-widely utilized in the public sector because of its proven benefits from this research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.357-364
• /
• 2021

The present study investigated the hydration properties and NO_x-removal performances of the cement pastes containing three different types of TiO₂. Two commercially available TiO₂ (P-25 and NP-400) and refined TiO₂ (GST) obtained from waste sludge were incorporated to cement paste at levels of 0, 5, 10, and 20 wt%. Isothermal calorimetry test results indicated that the TiO₂ incorporation induced a notable influence on the reaction kinetics of cement paste, showing the highest cumulative heat release in the samples containing P-25, followed by NP-400 and GST. Quantitative X-ray diffractometry as calculated by the Rietveld method identified that the incorporated TiO₂ promoted the formation of C-S-H, ultimately leading to the enhancement in the 28 day-compressive strength of cement pastes. As revealed by SEM/EDS analysis, the content of distributed Ti elements on the surface of the samples was in the order of P-25, GST, and NP-400. Regardless, the NO_x-removal performance was the highest in the sample containing P-25, followed by NP-400 and GST.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.209-217
• /
• 2021

This paper investigates the effect of high strength hooked-end steel fiber content and aspect ratio on the compressive and flexural performance of concrete. A total of ten mixtures were prepared and tested. Concretes with specific compressive strength of 30 MPa were reinforced with three different aspect ratios (l/d) of steel fibers 64, 67, and 80 and three different percentages of steel fibers 0.25, 0.50, and 0.75% by volume of concrete. Tensile strengths of steel fibers with l/d of 64, 67, and 80 are 2,000, 2,400, and 2,100 MPa, respectively. The compressive and flexural properties of plain and steel fiber-reinforced concrete (SFRC) mixtures were evaluated and compared. The experimental results indicated that the incorporation of high-strength hooked-end steel fibers had significant effects on the compressive and flexural performance of concrete. With the increase of steel fiber content, compressive performances, such as Poisson's ratio and toughness, of concrete were improved. The steel fibers with the least l/d of 67 resulted in a larger enhancement of compressive performances. The residual flexural strength, that is, post-cracking flexural resistance and toughness, of concrete is mainly depended on the dosage and aspect ratio of steel fibers. The residual flexural strength at serviceability (SLS) and ultimate limit state (ULS) defined in fib Model Code 2010 (MC2010) is increased as the fiber content and aspect ratio increase.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1445-1473
• /
• 2018

This study aims to analyze research-based spin-off companies, which are established in Innopolis to promote the commercialization of R&D outputs of public institutions. We analyzed 175 technology-based start-ups, which were founded before 2016, to examine how the companies' capabilities affect the sales growth rate. The results show that technological capability and entrepreneurial capability have positive relations with sales growth, while network capability and finance capability do not have significant associations. In addition, R&D intensity (R&D expenditure per employee) has moderating effects on the association between firm capabilities and sales growth rate since it strengthens the effect of technological capability and entrepreneurial capability but weakens the influence of network capability. This study contributes to widening the understanding of the importance of capabilities of research-based spin-off companies and their performance, and differs from most previous literature since it uses objective and quantitative data. It further suggests policy implications that the enhancement of technological and entrepreneurial capability are important for the stable growth of technology-based startups in the early stage.