• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.65-83
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• 한국가금학회지
• /
• 제35권3호
• /
• pp.303-311
• /
• 2008

본 실험은 Cu-methionine chelate(Cu-Met)와 Cu-soy proteinate(Cu-SP)가 산란계의 생산성과 소장내 미생물 균총 및 면역 체계에 미치는 영향을 조사하기 위해 실시하였다. 사양시험은 39주령의 산란계(Hy-line $Brown^{(R)}$) 960수를 선별하여 A형 2단 4열 케이지에 대조구 포함 총 6처리구로 구성하여 처리당 4반복, 반복당 40수씩(2수 수용 케이지 20개) 난괴법으로 임의 배치하였다. 시험 기간 동안 물과 사료는 자유 섭취하게 하였으며, 일반적인 점등 관리(자연 일조+조명; 16 hr)를 실시하였다. 시험구는 대조구, 항생제구(avilamycin 6 ppm), Cu- Met 50(Cu-methionine으로 Cu 50 ppm), Cu-Met 100(Cu- methionine으로 Cu 100 ppm), Cu-SP 50(Cu-soy proteinate로 Cu 50 ppm) 그리고 Cu-SP 100(Cu-soy proteinate로 Cu 100 ppm) 등 총 6처리였다. 일계 산란율(Hen-day egg production)과 산란지수(Hen-house egg production)는 Cu 첨가구들과 항생제 첨가구들이 대조구에 비해 높은 경향을 보였는데, 특히 Cu-Met 100 구는 대조구에 비하여 유의적으로(P<0.05) 높았으며 Cu 처리구들 간에 종류나 첨가 수준에 따른 차이는 유의하지 않았다. 난중에서는 항생제구와 Cu-SP 첨가구들이 대조구보다 무거운 경향을 보였고, Cu-Met 첨가구들보다는 유의하게(P<0.05) 무거웠다. 난각 강도, 난각 두께, 난각색, 난황색, Haugh unit 등 계란 품질에 있어서 처리구간에 유의적인 차이는 나타나지 않았다. Leukocytes와 erythrocytes 관련 모수들은 평균 적혈구 혈색소량(MCH)을 제외한 모든 항목에서 처리간에 유의적인 차이는 나타나지 않았다. MCH는 Cu-SP 100이 대조구와 비교하여 유의적으로 높았다(P<0.05). 혈청 IgG와 IgA의 농도는 처리구간에 유의적인 차이는 나타나지 않았다. 간 내 구리의 함량은 처리간에 유의한(P<0.05) 차이가 있었는데, 구리의 첨가 수준이 높을수록 높아지는 경향이 있었으며 같은 첨가 수준에서는 Cu-SP 첨가구들이 Cu-Met 첨가구들보다 높은 경향이 있었다. 소장 내용물 중 Cl. perfringens의 수는 항생제와 Cu 첨가구들이 대조구에 비해 적었고 E. coli 수는 첨가구들에서 감소하는 경향이 있었으며, Lactobacilli 수는 Cu 첨가구들이 대조구나 항생제구와 비교하였을 때 많았다. 결론적으로 Cu-Met와 Cu-SP는 산란계의 산란율 개선에 있어서 항생제와 유사한 효과를 나타내었다. Cu-SP는 Cu-Met보다 난중을 유의하게 증가시켰으나 다른 항목들에 있어서는 Cu 공급원(Cu-Met vs Cu-SP)과 첨가수준(50 vs 100 ppm)에 따른 유의적 차이는 없었다.

• 한국가금학회지
• /
• 제40권2호
• /
• pp.97-103
• /
• 2013

본 연구는 산란계의 동물복지를 적용한 운동장 면적에서 사육한 산란계의 생산성, 면역성 및 스트레스 반응에 미치는 영향을 조사하여 동물복지농가 육성과 안전축산물 생산을 위한 기초자료로 활용하고자 수행하였다. 사양시험은 13주령의 Hy-line-Brown 계열의 실용 산란계 90수를 공시하여 38주간 실시하였다. 대조구는 수당 $0.042m^2$ 면적의 케이지에서 사육(케이지 사육), 수당 축사 $0.11m^2$(평사)와 운동장 $1.1m^2$를 결합한 환경에서 사육($1.1m^2$ 운동장), 수당 축사 $0.11m^2$(평사)와 운동장 $2.2m^2$를 결합한 환경에서 사육($2.2m^2$ 운동장)으로 시험구를 편성하여 처리구당 3반복, 반복당 10수씩 난괴법으로 배치하여 시험하였다. 초기 산란율은 유의적으로 케이지 사육에서 유의적으로 높았으나(P<0.05), 중 후반기에는 운동장 사육 시험구에서 다소 높은 산란율을 보였다. 사료섭취량은 39주령까지 운동장 시험구에서 유의적으로 많았으나(P<0.05), 이후에서 종료 시 까지는 차이가 없었다. 시산일령은 대조구 비해 운동장 사육 시험구에서 16일 지연되었으며(P<0.05), 사육 환경이 계란의 품질에는 영향을 미치지 않았다. 면역 활성을 조사한 결과, 운동장사육 시험구에서 IgA는 유의적으로 높았고(P<0.05), IgG, IgM 및 corticosterone은 비교적 높았다. 결론적으로 산란계운동장 사육은 산란 초기의 생산성을 저하시키나, 중 후기의 생산성은 약간 증가를 보였으며, 면역성은 증가하였으나 스트레스는 다소간 더 받는 것으로 나타났다. 따라서 초기 산란율을 향상시키고, 적절한 외부의 환경에 의한 스트레스를 줄일 수 있는 사육 환경이 뒷받침된다면 운동장 사육이 동물복지형 사육으로 매우 적합한 사양방법이라고 사료된다.

• 한국버섯학회지
• /
• 제15권4호
• /
• pp.223-228
• /
• 2017

본 연구는 팽이버섯 수확후배지를 이용한 발효 TMR 급여가 한우 거세우의 사양성적과 도체특성 및 경제성 분석에 미치는 영향을 조사하기 위해 수행되었다. 팽이버섯 수확후배지 발효사료(F-SMS) 제조를 위하여 자체 개발된 혼합배양액(Bacillus sp. UJ03+Saccharomyces sp. UJ14)을 사용하였다. 한우 거세우 14개월령 24두를 공시하여 성장단계(비육전기, 비육후기, 비육마무리기)에 따라 배합비를 조절하면서 사육한 후, 30개월령에 도축하였다. 처리구는 자체 TMR을 급여한 대조구(Control), F-SMS 10% 첨가구(T1) 및 30% 첨가구(T2)로 나누어 난괴법으로 배치하였다. 증체량은 처리구간에 유의적인 차이가 없었으나. 건물과 TDN 섭취량은 비육 마무리기에 T1구에서 다른 처리구보다 높았고, 조단백질 섭취량은 전 시험 기간 동안 T2구가 다른 처리구에 비해 많았다(p<0.05). 배 최장근 단면적과 등지방두께는 팽이버섯 수확후배지 발효 사료 급여 시 증가되는 경향이었으며, T1구에서 육량 A등급 출현율이 가장 높았다. 순수익은 대조구에 비해 T1과 T2구가 각각 1.2% 및 13.3%가 증가한 것으로 나타났다. 이상의 결과들을 종합해 볼 때, 팽이버섯 수확후배지의 원료비와 발효사료 제조비용의 변동이 없고, 사료로서 안전성이 확보된다면, 팽이버섯 수확후배지는 한우 비육에 있어서 우수한 대체사료자원으로서 농가소득에 크게 기여할 것으로 판단된다.

• Journal of Animal Science and Technology
• /
• 제45권4호
• /
• pp.569-576
• /
• 2003

본 연구는 영양소 수준을 낮춘 옥수수-대두박 기초 사료내 $\alpha$-galactosidase와 galactomannanase를 함유한 탄수화물 분해 복합효소제 (ENDO- POWER$^{\circledR}$)와 미생물 파이테이즈 (Natuphos$^{\circledR}$) 의 개별첨가 혹은 동시첨가가 육성돈의 생산성, 영양소 소화율 및 체중 증체 당 사료비에 어떠한 영향을 미치는 가를 평가하고자 실시 되었다. 개시 체중 29.1$\pm$0.14 kg의 육성돈 48두를 공시하여 28일간 사양시험을 실시하였다. 시험설계는 4처리를 두었으며, 처리당 3반복 반복당 4두의 육성돈이 완전임의 배치 되었다. 시험 처리는 1) CON (대조구), 2) LP+NTPS (대조구 사료에서 유효인 함량을 0.15% 단위 낮춘 사료에 미생물 파이테이즈 (Natuphos$^{\circledR}$) 0.1% 첨가 (500 FTU/kg 사료), 3) LEL+ENP (대조구 사료에서 대사에너지와 라이신 함량을 대조구 사료 대비 각각 3% 낮춘 사료에 탄수화물 복합효소제 (ENDP-POWER$^{\circledR}$) 첨가) 및 4) LPEL+ENZ (대조구 사료에서 대사에너지와 라이신 함량을 대조구 사료 대비 각각 3% 낮추고 유효인 함량을 0.15% 단위 낮춘 사료에 미생물 파이테이즈 0.1%와 탄수화물 복합효소제 0.1%를 각각 첨가)를 두었다. 전체 사양시험 기간동안 (28일), 일당 증체량 (ADG), 일당사료섭취량 (ADFI) 및 사료요구량 (Feed/gain)은 사료처리구에 따라 유의적인 차이를 나타내지 않았다(P>0.05). 그러나 저 영양소 수준 사료에 파이테이즈와 탄수화물 복합효소제의 개별적 혹은 동시 첨가는, 대조구에 비해, 시험 전기간에 걸쳐 사료효율을 다소 개선 시키는 경향을 보여주었다. 건물, 조단백질 및 칼슘 소화율에 있어서는 처리구간에 유의적인 차이를 보이지 않았으나, 총 에너지 소화율에 있어서는 LEL+ENP 처리구와 비교해 볼 때, LP+NTPS와 LPEL+ENZ 처리구가 유의적으로 높게 평가되었다 (p<0.05). 건물 배설량은 LPEL+ENZ 처리구가 가장 낮았으며, 칼슘과 인 배설량은 LP+NTPS구가 가장 낮았다(p<0.05). 사양시험 기간동안 소요된 전체 사료비용은 대조구와 비교하여 볼 때, 효소제 첨가 시 낮았으며, 특히 1 kg 증체 하는데 필요한 사료비용은 대조구와 비교하여 LP+NTPS, LEL+ENP, LPEL+ENZ가 각각 3.5% (609.1 vs. 588.3 원/kg), 13.8% (609.1 vs. 535.3원/kg), 12.4% (609.1 vs. 541.9 원/kg) 낮은 것으로 조사되었다. 결론적으로, 본 실험 결과는 옥수수-대두박 위주 육성돈 사료에 유효인, 에너지 및 라이신 함량을 낮추고 파이테이즈와 탄수화물 분해 복합 효소제를 첨가 시 육성돈의 성장에는 유해한 영향 없이 영양소 배설량을 감소 시킬 수 있으며, 또한 양돈 생산비를 감소 시킬 수 있는 가능성을 제시했다고 판단된다.

• Journal of Animal Science and Technology
• /
• 제48권4호
• /
• pp.503-512
• /
• 2006

본 시험은 육성돈 사료내 생균제 (Lactobacillus brevis, 3.4×108 CFU/g)의 첨가, 급여가 생산성, 건물과 질소 소화율, 혈구수 및 분 내 악취 발생 물질에 미치는 영향을 조사하기 위하여 실시하였다. 개시시 체중 24.60±1.28kg의 3원교잡종 [(Landrace×Yorkshire)×Duroc] 육성돈 96두를 공시하여 42일간 사양시험을 실시하였다. 시험설계는 옥수수－대두박 위주의 사료내 생균제를 첨가하지 않은 CON (basal diet), 생균제를 0.2% 첨가한 LB1 과 생균제를 0.4% 첨가한 LB2의 3개 처리구로 하여 처리당 8반복, 반복당 4두씩 완전임의 배치하였다. 전체 시험기간동안의 일당증체량, 일당사료섭취량 및 사료효율에서 있어서는 처리구간 유의한 차이를 나타내지 않았다(P<0.05). 질소 소화율에서 LB1 과 LB2 처리구가 대조구와 비교하여 유의적으로 증가하였다(linear effect, P<0.05). 그러나 건물 소화율에 있어서는 처리구간에 유의적인 차이를 보이지 않았다(P>0.05). 혈액내 WBC, RBC 및 lymphocyte 함량에 있어서는 처리구간에 유의적인 차이를 보이지 않았다(P>0.05). 분내 암모니아태 질소 및 황화수소의 함량은 LB2 처리구가 대조구와 비교하여 유의적으로 감소하였다(linear effect, P<0.05). 분내 acetic acid 와 propionic acid 함량에서는 BMS2 처리구가 대조구와 비교하여 유의적으로 감소하였다(linear effect, P<0.05), butyric acid 에서는 각 처리구간 유의적인 차이는 없었다(P>0.05). 결론적으로, 육성돈 사료내 0.4%의 Lactobacillus brevis (3.4×108 CFU/g) 첨가는 질소 소화율 향상 및 분내 악취 발생 물질 함량을 감소 시키는 것으로 사료된다.

• 유통과학연구
• /
• 제16권5호
• /
• pp.83-90
• /
• 2018

Purpose - Journals of Korea Distribution Science Association (KODISA) made great efforts in responding to the constant shifts in academic paradigms and in producing synergetic effects among KODISA journals to achieve the goal of maintaining their status in the world's reputable scholarly journals. The aim of this study is to analyze the current practice and performance of KODISA journals and develop strategies that will continuously meet and respond to the changes and success in the future. Research design, data, and methodology - This is a case study, an analytical approach, which focuses on analyzing current and previous strategies, practices, and performances of the four major journals of KODISA and the association. The organizational structure, including election and terms of KODISA officers, new membership, and members of editorial board, is discussed and analyzed. The citation, submission, publication, and rejection rates of all four journals are examined, and the progress, including the status of indexing of each journal, is discussed. Results - The analysis indicates that KODISA has significantly invested its resources into improving its journals and attracting new members. The analysis also shows the strategy of the organizational structure, which includes election and terms of officers and editorial board members that implemented over the years, was successful. Both Journal of Distribution Science (JDS) and Journal of Finance, Economics, and Business (JAFEB) are indexed in SCOPUS, with East Asian Journal of Business Management (EAJBM) in the final stage of the SCOPUS indexing evaluation, and International Journal of Industrial Distribution and Business (IJIDB) will complete and submit their indexing evaluation materials to SCOPUS this summer. Conclusions - The success and progress of KODISA and its journals clearly support the need for continuous development, analysis, revision, and implementation of strategies. Based on the analysis, conducting the annual performance reviews of the association and its journals and planning and strategizing based on the reviews since 2011 have greatly contributed to the overall success. In terms of meeting the short term strategy, KODISA has to continue developing relationships with relevant and appropriate scholarly/academic associations to expand the scope of its business, establishing independence of each journal and its respective procedures and practices and improving the quality of the journals and their publications through KODISA's international conferences.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• 대한환경공학회지
• /
• 제31권11호
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone은 높은 수면적부하율 운전이 가능하고, 구동부분이 없고, 운전 및 유지관리비가 적게 소요되어 미세입자물질제거에 효과적인 장치로 다양한 산업 분야에서 활용되고 있다. Hydrocyclone에 나선형 유입부를 통해 직각으로 유입되어 중력이 아닌 원심력에 의해 입자물질이 하부배출구로 분리되고 처리수는 vortex finder를 통해 배출된다. 입자분리에 hydrocyclone은 많은 장점을 가지고 있음에도 불구하고 도시지역 강우유출수 처리사례는 드문 실정이다. 본 연구에서는 변형된 hydrocyclone과 perlite 여재를 조합한 hydrocyclone filter (HCF)을 이용하여 강우유출수내 미세입자의 제거능을 분석하였다. 입자물질들은 인공입자들을 이용하여 강우유출수내 입자농도를 모의 실험하였다. 인공입자들을 물에 분산시켜 강우유출수를 재현하였는데 사용한 입자들은 이온교환 수지, 도로측구 퇴적물질, 상업지역 맨홀퇴적물질, 그리고 실리카겔 등이다. 하부배출부와 vortex finder 구조를 달리하여 HCFopen system과 HCF-closed system으로 구분하여 처리능을 분석하였다. HCF장치는 아크릴 수지를 이용하였는데 hydrocyclone의 직경은 120 mm이고 여과조의 직경은 250 mm이고 전체적인 높이는 800 mm로 제작하였다. 운전조건별 유입수 농도와 입경을 다양하게 적용하였고 SS와 COD농도를 분석하여 처리효율을 산정하였다. HCF-open system의 경우 운전 가능한 최대 수면적부하율은 700 $m^3/m^2$/day이었고 HCF-closed system의 경우 수면적부하율 1,200 $m^3/m^2$/day까지이다. HCF-open system 운전결과 HCFclosed system에 비교하여 평균 수면적부하율은 2배 이상 높게 운전이 가능하며 처리효율도 8~20% 이상 향상되는 것으로 분석되었다. 또한 유입수 SS농도가 높을수록 처리효율이 증가하며, 입경이 클수록 수면적부하율의 변화에 대한 처리효율의 영향이 적은 것으로 분석되었다. HCF-closed system의 실험을 통한 수면적부하율 변화에 대한 실리카겔입자의 제거 효율과 CFD입자추적기법을 이용한 예측 처리효율을 비교한 결과 CFD에 예측효율이 실제실험결과와 비교하여 다소 높게 나타나지만 처리효율의 경향은 매우 유사하게 나타나 CFD추적기법을 이용한 HDS유형 처리장치 설계 시 유용한 도구로 활용될 수 있을 것으로 판단된다.