• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.447-451
• /
• 2008

This study was carried out to know the difference of vapor transmission on the thickness of Paulownia wood(Paulownia tomentosa). The behavior of moisture transmission of wood thickness direction is generally estimated by vapor permeability and vapor transmission resistance. In general, Paulownia wood is known to use of inside material for furniture making, because of the excellent ability of vapor adsorption and/or desorption. Quarter sawing Paulownia wood material is prepared and the thickness is 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, respectively. The measurement of vapor transmission were conducted by the "cup method" in accordance with JIS(Japanese Industrial Standard) Z-0208. The experiment was made in the condition of 49.8mmHg vapor pressure difference and $40^{circ}C$ at constant temperature. From the experiment results, it was considered that Paulownia wood is very stable on moisture variation and any other material conditions. In this experiment we found that the vapor permeability and vapor permeance was reduced with the increase of wood thickness to vapor direction and vapor transmission resistance and specific vapor transmission resistance was increased with the increase of wood thickness to vapor direction. Besides moisture contents of adsorption and desorption side were about 5 percent and 14 percent, respectively. Mean value was 9.5 percent and about 10 percent in dry oven method. Moisture gradient was reduced with the increase of wood thickness for a small moisture difference of adsorption and desorption side.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.2
• /
• pp.1-12
• /
• 1997

This research aims to develop biofilm process for the nutrient removal of piggery wastewater. The developed process is the four stage anoxic-oxic biofilm process with recirculation of the final effluent. In summery, the results are as follows: 1. Nitrification in the piggery wastewater built up nitrite because of the high strength ammonia nitrogen. The nitrification of nitrobacter by free ammonia was inhibited in the total ammonia nitrogen loading rate with more than 0.2 kgNH$_{3}$-N/m$^{3}$·d. 2. The maximal total ammonia nitrogen removal rate was obtained at 22$\circ $C and without being affected by the loading rate. But total oxidized nitrogen production rate was largely affected by loading rate. 3. Autooxidation by the organic limit was a cause of the phosphorus release in the aerobic biofilm process. But the phosphorus removal rate was 90 percent less than the influent phosphorus volumetric loading rate of above 0.1 kgP/m$^{3}$·d. Therefore, the phosphorus removal necessarily accompanied the influent loading rate. 4. On the anoxic-oxic BF process, the total average COD mass balance was approximately 67.6 percent. Under this condition, the COD mass removal showed that the cell synthesis and metabolism in aerobic reactor was 42.8 percent and that the denitrification in anoxic reactor was 10.7 percent, respectively.

• Korean journal of applied entomology
• /
• v.26 no.1 s.70
• /
• pp.43-47
• /
• 1987

Effect of percent penetration and hyphal growth on lesion formation was evaluated at 23/15C (day/night), 29/21C regimes and greenhouse condition (33-23C) using three rice cultivars, Aichi-asahi, Toyotama and Yamabiko with 6 isolates of Pyricularia oryzae. Percent penetration at 72hr and 96hr after inoculation was highly significant with lesion formation at any temperature regime. At the same time, number of appressoria that exceeded hyphal growth value 11 was also highly significant with lesion formation. However, number of appressoria that exceeded hyphal growth value 30 was significant only at 72hr after inoculation at 29/21C regime. In general, statistical fitness of the model was higher at 23/15C regime than at 29/21C regime or a greenhouse condition. These series of phenomenon were more apparent in a susceptible cultivar Aichi-asahi.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.153-159
• /
• 1997

Pokeweed, a polycarpic plant, has been used as herbage medicine, vegetable or dye. It, however, is known as an aggressive plant in the vicinity of the industrial area evolving air pollutants. The experiment was done to determine the effect of priming using nitrates, germination temperature and light quality on germination of its seed to get information on the optimum germination process as well as its establishment. The daily percent germination was measured to 12 days after sowing since its seeds were treated by two different nitrates [KNO$_3$, Ca(NO$_3$)$_2$]. their different concentrations (0, 50, 150, 300mM), then treatment duration (1, 3, 6 days), different germination temperature (day /night; 30/30, 30/20, 20/30, 20/2$0^{\circ}C$) and light quality (red, white, dark) before or during germination. The percent germination was greater in the KNO$_3$ treatment than in the Ca(NO$_3$)$_2$ but in the priming treatment with KNO$_3$ in comparison with no-priming. In the priming treatment with KNO$_3$, the percent germination was increased with its increased concentration to 150mM although decreased with delayed duration to 6 days. Regardless of light quality, the greater percent germination was shown in the order of 2$0^{\circ}C$ constant and 20/3$0^{\circ}C$ alternative, 3$0^{\circ}C$ constant, 30/2$0^{\circ}C$ alternative temperature. The germination was less in the dark during germination than in the illumination in which the red light had greater percent germination compared to white light. The seeds primed with KNO$_3$ were germinated under the alternative temperature even in the dark condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1617-1621
• /
• 2005

In this study, as a basic research to improve braking efficiency of a ventilated disk brake, we carried out a thermal stress analysis. From analysis result, we knew that a maximum mechanical stress by braking pressure and friction force is applicable to 5 percent of yield strength and has no effect on a fatigue life's decrease for brake disk material. While, a maximum thermal stress by frictonal heat is applicable to 43 percent of yield strength and locates on a friction surface. So, we have found that a thermal stress is the primary factor of crack initiation on a friction surface of disk brake

• Korean Journal of Microbiology
• /
• v.18 no.4
• /
• pp.172-179
• /
• 1980

The rhizome rot of ginger, caused by fusarium oxysporum f.zingiberi, gives a great deal of damages to the ginger farming in Korea. Main symptoms to the disease include the yellowing and blighting of the stems as the rotting of rhizomes. The infection rate was 20 percent in Bongdong, Jeonbug, whereas 10 percent in Susan, Chungnam. The rate was higher at the farm where gingers had been cultivated for many years. To control the disease, soil fungicides Dowfum MC-2 and Tolene C-17 were turned out to be more effective than Di-Trapex nad Daconil. Treatment of Benlate to the rhizome pieces, which were cut for propagation, also showed a better result as compared with that of Othocide. Dual treatment of both Dowfum MC-2 or Tolene C-17 to the farm soil and Benlate to the rhizome pieces was recommended for the best chemical control.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.138-142
• /
• 2000

The effects of stalk cutting time and environmental factors such as air temperature, leaf temperature, solar radiation and leaf moisture content during harvesting and curing in burley tobacco(Nicotiana tabacum L.) on weight loss of fresh stalks and sunburning in leaves were investigated at Chonju Experiment Station, Korea Ginseng & Tobacco Research Institute in 1996 and 1997. Twelve to fifteen percent of the fresh weight was lost in 3 to 4 hours after stalk-cutting, and sunburned leaves could be observed in case of stalk cutting between 11:00 and 15:00 O'clock on a clear sunny day, when the air temperature was 34 to 35$^{\circ}C$, leaf temperature 52 to 54$^{\circ}C$, and solar radiation 700 to 940 w/$m^2$. The leaves exposed to this weather condition were sunburned within 1 hour after stalk cutting. But low temperature (below $25^{\circ}C$) with high solar radiation(above 700w/m2) or high temperature(above 3$0^{\circ}C$) with low solar radiation (below 600w$m^2$) did not induce the sunburn damage in leaves. As the leaf temperature and leaf moisture content were higher, the sunburned leaves increased. The leaves at the higher stalk position were more easily sunburned than those at the lower. This result indicates that the immature leaves with higher chlorophyll content might be more susceptible to sunburning.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1051-1054
• /
• 2005

On this study, we optimized minimizing the characteristic function for mixed result of the structural contact analysis and the buckling analysis according to the pin jig initial model's level change using mixed the table of orthogonal away and ANOM, Pin jig's weight is reduced up to 20 percent considering constraint conditions. Also we optimized reducing 20 percent weight of pin jig model using topology optimization.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.382-386
• /
• 1992

Effect of temperature on some quality characteristics of aqueous extracts of sea mustard was investigated. The concentration of total solids and protein and their yields in the extracts were increased as the extraction temperature raised from $50^{\circ}C$ to $100^{\circ}C$ during initial period of extraction. However the lower values of the percent of supernatant was obtained at $50^{\circ}C$ and $100^{\circ}C$. The percent of yields of solids and protein for 1 hour extraction at $100^{\circ}C$ were 21.56% and 4.7%, respectively. The highest viscosity, which was $2.5{\sim}4.0$ times of higher values of the other extracts, was obtained by 2 hours extraction at $100^{\circ}C$. The turbidity was gradually decreased after 1 hour extraction. The activation energy calculated for initial increase rate of solid and protein concentration were 1.18 and 3.90 Cal/mole, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.1
• /
• pp.33-40
• /
• 1987

This paper aims to study the browning reactions of lipid originated carbonyl compounds with nitrogenous compounds in dried fishes, flounder, mackerel, shrimp, hair tail fish, and whale. The major fatty acids in the flounder, the mackerel, the shrimp, and the hair tail fish were $C_{16:0},\;C_{18:1},\;C_{22:5},\;C_{22:6}$, and those in the whale meat were $C_{16:0},\;C_{18:1},\;C_{20:4}$. The nonpolar lipid contained higher percent of $C_{18:1}$ while the polar lipid contained higher percent of $C_{22:6}$. When those fishes were dried and stored, the PoV and CoV were high in the mackerel and the hair tail fish, whereas low in the flounder, the shrimp, and, the whale. The browning was developed more rapidly in the lipid soluble fraction than in the water soluble fraction of each sample, and the loss of available lysine and polyenoic acids were accompanied. The polyunsaturated fatty acids markedly decreased, particularly, in phospholipid than in neutral lipid, and $C_{20:5},\;C_{22:5},\;C_{22:6}$ were rapidly decreased during the storage.