• 제목/요약/키워드: penetration model

검색결과 785건 처리시간 0.022초

균열을 갖는 초기재령 콘크리트의 염화물 침투 해석 (Chloride-Penetration Analysis in Cracked Early-Age Concrete)

  • 송하원;박상순;변근주
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.635-640
    • /
    • 2001
  • In this study, a mathematical model is established for prediction of chloride penetration in unsaturated cracked early-age concrete. The model is combined with models for thermo-hygro dynamic coupling of cement hydration, moisture transport and micro-structure development. Chloride permeability and water permeability at cracked early-age concrete specimens are evaluated using a rapid chloride permeability test and a low-pressure water permeability test, respectively. Then, a homogenization technique is introduced into the model to determine equivalent diffusion coefficient and equivalent Permeation coefficient. Increased chloride transport due to cracks at the specimen could be predicted fairly well by characterizing the cracks using proposed model. Proposed model is verified by comparing diffusion analysis results with test results.

  • PDF

A numerical study on the damage of projectile impact on concrete targets

  • Lu, Gang;Li, Xibing;Wang, Kejin
    • Computers and Concrete
    • /
    • 제9권1호
    • /
    • pp.21-33
    • /
    • 2012
  • This paper presents the numerical simulation of the rigid 12.6 mm diameter kinetic energy ogive-nosed projectile impact on plain and fiber reinforced concrete (FRC) targets with compressive strengths from 45 to 235 MPa, using a three-dimensional finite element code LS-DYNA. A combined dynamic constitutive model, describing the compressive and tensile damage of concrete, is implemented. A modified Johnson_Holmquist_Cook (MJHC) constitutive relationship and damage model are incorporated to simulate the concrete behavior under compression. A tensile damage model is added to the MJHC model to analyze the dynamic fracture behavior of concrete in tension, due to blast loading. As a consequence, the impact damage in targets made of plain and fiber reinforced concrete with same matrix material under same impact velocities (650 m/s) are obtained. Moreover, the damage distribution of concrete after penetration is procured to compare with the experimental results. Numerical simulations provide a reasonable prediction on concrete damage in both compression and tension.

고온 고압하에서의 DME 연료 분무 및 증발 특성 (Spray and Evaporation Characteristics of DME fuel at the High pressure and temperature)

  • 김형준;서현규;이창식
    • 한국분무공학회지
    • /
    • 제12권2호
    • /
    • pp.101-107
    • /
    • 2007
  • The purpose of this study is to analyze spray and evaporation characteristics of DME fuel at the high pressure and temperature. For the numerical analysis of dimethyl ether(DME) fuel spray characteristics, hybrid breakup model was applied to the DME spray and its breakup process. In order to obtain experimental results for comparison with the predicted ones, the visualization of the spray evolution process was executed by using a Nd:YAG laser. Also, the numerical investigation was conducted by the two hybrid models for primary and secondary breakup of the DME spray. The primary breakup model was used the Kelvin-Helmholtz(KH) breakup model. In the secondary breakup process, Rayleigh-Taylor(RT) and Drop Deformation Breakup(DDB) model was applied. The results of this study provide the macroscopic characteristics of the spray such as spray tip penetration and cone angle, and prediction accuracy of the two hybrid model.

  • PDF

복합 모델을 이용한 연료 인젝터의 분무 미립화 모델링 (Modeling of Spray Atomization of Fuel Injector Using Hybrid Model)

  • 박성욱;김형준;류열;이창식
    • 한국자동차공학회논문집
    • /
    • 제10권6호
    • /
    • pp.27-33
    • /
    • 2002
  • This paper presents the comparison of prediction accuracy of hybrid models. To obtain the experimental results fur comparing with the numerical results, the macroscopic and microscopic structures of the hollow-cone spray such as spray development process, spray penetration and the distribution of mean droplet size are investigated by using a shadowgraph technique and phase Doppler particle analyzer. Also, the numerical researches using various hybrid models are performed. LISA model and WAVE model are used for the primary breakup, and TAB, DDB, and RT model are used for the secondary breakup.

긴 관통자에 의한 고속충돌현상 연구 (A Study on High Velocity Impact Phenomena by a Long Rod Penetrator)

  • 이창현;최준홍;홍성인
    • 대한기계학회논문집
    • /
    • 제18권3호
    • /
    • pp.573-583
    • /
    • 1994
  • In this study, the shock characteristics for high velocity impact phenomena during the initial shock state by the long rod penetrator are calculated. From these results we re-analyze the one-dimensional hydrodynamic penetration theory by introducing the effective area ratio calculated from the mushroomed strain which is dependent on impact velocity. Calculated penetration depth and mushroomed strain show good agreement with high velocity impact experimental data. In addition we visualize the shock wave propagation in a transparent acryle block.

A simplified procedure to incorporate soil non-linearity in missile penetration problems

  • Siddiqui, N.A.;Kumar, S.;Khan, M.A.;Abbas, H.
    • Structural Engineering and Mechanics
    • /
    • 제23권3호
    • /
    • pp.249-262
    • /
    • 2006
  • In this paper, a simplified mathematical procedure is presented to incorporate nonlinearity in soil material to predict the deceleration time history, penetration depth and other relevant parameters for normal impact of missiles into soil targets. Numerical method is employed for these predictions. The results of the study are compared with experimental observations and predictions available in the literature. A good agreement is found with experimental observations and an improvement is observed with existing predictions. A comparison is also made with linear soil model. Some parametric studies are also carried out to obtain the results of practical interest.

사질토 지반에서의 얕은기초 침하량 해석 (Estimation Of Footing Settlement In Sand)

  • 이준환;박동규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.44-49
    • /
    • 2004
  • The settlements of footings in send are often estimated based on the results of in-situ tests, particularly the standard penetration test (SPT) and the cone penetration test (CPT). In this paper, we analyze the load-settlement response of vertically loaded footings placed in sands using both the finite element method with a non-linear stress-strain model and the conventional elastic approach. Calculations are made for both normally consolidated and heavily overconsolidated sands with various relative densities. For each case, the cone penetration resistance qc is calculated using CONPOINT, a widely tested program that allows computation of qc based on cavity expansion analysis. Based on these analyses, we propose a procedure for the estimation of footing settlement in sands based on CPT results.

  • PDF

Influence of High PV Penetration and STATCOM on Rotor Angle Stability of SMIB Transmission System

  • Selwa, FETISSI;Djamel, LABED;Imen, LABED
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.849-857
    • /
    • 2018
  • This paper aims is to study the effect of photovoltaic generation penetration and STATCOM on the transient stability of a single machine infinite bus (SMIB) system based on the rotor angle stability. The influence of STATCOM and PV penetration can be seen through damping oscillations, so that the generator remains stable with the rest of the system for various fault conditions. The simulation results obtained make it possible to efficient identify harmful and beneficial impact of increasing the PV penetration and the existence of STATCOM capability. The system model is created in MATLAB/ SIMULINK software.

Mathematical Models for Optimal Bead Geometry for GMA Welding Process

  • Park, C.E.;Li, C.S.;Kim, I.S.
    • International Journal of Korean Welding Society
    • /
    • 제3권1호
    • /
    • pp.8-16
    • /
    • 2003
  • A major concern in Gas Metal Arc (GMA) welding process is the determination of welding process variables such as wire diameter, gas flow rate, welding speed, arc current and welding voltage and their effects on the desired weld bead dimensions and shape. To successfully accomplish this objective, 81 welded samples from mild steel AS 1204 flats adopting the bead-on-plate technique were employed in the experiment. The experimental results were used to develop a mathematical model to predict the magnitude of bead geometry as follows; weld bead width, weld bead height, weld bead penetration depth, weld penetration shape factor, weld reinforcement shape factor, weld bead total area, weld bead penetration area, weld bead reinforcement area, weld bead dilution, length of weld bead penetration boundary and length of weld bead reinforcement boundary, and to establish the relationships between weld process parameters and bead geomery. Multiple regression analysis was employed for investigating and modeling the GMA process and significance test techniques were applied for the interpretation of the experimental data.

  • PDF

A60 급 갑판 관통 관의 이산설계 근사최적화를 위한 대리모델과 유전자 알고리즘 응용 (Surrogate Models and Genetic Algorithm Application to Approximate Optimization of Discrete Design for A60 Class Deck Penetration Piece)

  • 박우창;송창용
    • 해양환경안전학회지
    • /
    • 제27권2호
    • /
    • pp.377-386
    • /
    • 2021
  • A60 급 갑판 관통 관은 선박과 해양플랜트에서 화재사고가 발생할 경우 화염의 확산을 방지하고 인명을 보호하기 위해 수평구조에 설치되는 방화장치이다. 본 연구에서는 다양한 대리모델과 다중 섬 유전자 알고리즘을 이용하여 A60 급 갑판 관통 관의 방화설계에 대한 이산변수 근사최적화를 수행하였다. A60 급 갑판 관통 관의 방화설계는 과도 열전달해석을 통해 평가하였다. 근사최적화에서 관통관의 길이, 지름, 재질, 그리고 단열재의 밀도는 이산설계변수로 적용하였고, 제한조건은 온도, 생산성 및 가격을 고려하였다. 대리모델 기반의 근사최적설계 문제는 제한조건을 만족하면서 A60 급 갑판 관통 관의 중량을 최소화할 수 있는 이산설계변수를 결정하도록 정식화하였다. 반응표면모델, 크리깅, 그리고 방사기저함수 신경망과 같은 다양한 대리모델이 근사최적화에 사용되었다. 근사최적화의 정확도를 검토하기 위해 최적해의 결과는 실제 계산 결과와 비교하였다. 근사최적화에 사용된 대리모델 중 방사기저함수 신경망 모델이 A60 급 갑판 관통 관의 방화설계에 대해 가장 정확한 최적설계 결과를 나타내었다.