• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.269-281
• /
• 2010

The cone penetration test(CPT) has been increasingly used for in situ site characterization. However, the use of CPT is often limited due to specific site conditions depending on the cone size, geometry, and capacity of the CPT system used. In South Korea, it has generally been considered that the CPT could be satisfactorily performed only in soft soils. Louisiana State University/ Louisiana Transportation Research Center has implemented a field-rugged continuous intrusion miniature cone penetration test (CIMCPT) system since the 1990s. The miniature cone penetrometer of the CIMCPT system has a cross-sectional cone area of $2cm^2$ allowing finer soil profiles compared to the standard $10cm^2$. The reduced cross-sectional area also enables a system capacity reduction leading to cost saving and ease in maintenance. In addition, the continuous intrusion mechanism allows fast and economic site investigations. Samsung C&T Corporation has recently implemented a similar CIMCPT system. In this study, case studies on the field application of Samsung CIMCPT system for the last 2 years are presented to illustrate its performance investigation and its usefulness and limitation. Results of the case studies show that the CIMCPT system can be applied to soils with cone tip resistance($q_c$) values up to about 30MPa and allows a reliable and useful way to characterize soft soils. The results also show that the rod buckling limits the investigation depth by the system and the large contact pressure of the CIMCPT truck prevents the use of the system at sites with soft surface soils. According to the results of the case studies, the Samsung CIMCPT system has been being upgraded with a miniature cone with a longer rod, a crawler-type transportation system, a pre-boring system, and so on.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.404-410
• /
• 2009

This study was carried out to develop a self-propelled type explosive subsoiler for improving the root zone soil conditions in orchard and other forest fields. Prototype was designed to be able to inject air and other soil improving material such as lime into soil at the same time, and thus improve the air permeability and drainage of orchard soils to promote the root growth of tree for high quality fruit production. Soil penetration device of explosive subsoiler is composed of air hammer, penetration rob and air injection nozzle. To support the soil penetration device of explosive subsoiler to penetrate vertically, modified Scott-Russel mechanism was used. Timing control device for simultaneous injection of soil improving material with air was attached to the out side wall of air cylinder and as the cylinder move, the soil improving material was injected into soil at the same time. Turning radius of prototype was 2.2-2.3 m with good mobility in sloped land. It took approximately 1 minute for lime injection system to reach the optimum pressure of 9.9 kg/$cm^2$, average 10-20 seconds were required to rupture soil with the depth of 50 cm and 2-3 seconds were required for explosion, so all in all about 1 minute and 20 seconds were required for one cycle of explosion. Maximum soil rupture depth and diameter were 50 cm and 3-4 m respectively depending on the soil type and soil moisture content. For final design of explosive subsoiler inclination angle of lime hopper was increased from 60 degree to 70 degree and the shape of hopper was changed from rectangular cone to circular cone to solve the clogging problem of lime at out let. Agitating system operated by compressed air was attached to the metering device of the prototype, thus more than 90 cc of lime was discharged per cycle from metering device without clogging problems.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.1-9
• /
• 2013

PURPOSES : About 35% of air pollutant is occurred from road transport. NOx is the primary pollutant. Recently, the importance of NOx removal has arisen in the world. $TiO_2$ is very efficient for removing NOx by photocatalytic reaction. The mechanism of removing NOx is the reaction of photocatalysis and solar energy. Therefore, $TiO_2$ in concrete need to be contacted with solar radiation to be activated. In general, $TiO_2$ concrete are produced by substitute $TiO_2$ as a part of concrete binder. However, 90% of $TiO_2$ in the photocatalysis can not contacted with the pollutant in the air and solar radiation. Coating and penetration method are attempted as the alternative of mixing method in order to locate $TiO_2$ to the surface of structure. METHODS : The goal of this study was to attempt to locate $TiO_2$ to the surface of concrete, so we can use the concrete in pavement construction. The distribution of $TiO_2$ along the depth were confirmed by basing on the comparison of $TiO_2$ compare by using the EDAX(Energy Dispersive X-ray Spectroscopy). RESULTS : $TiO_2$ were distributed within 3mm from concrete surface. This distribution of $TiO_2$ is desirable, since the $TiO_2$ induce photocatalysis are located to where they can be contacted with the air pollutant and solar radiation. CONCLUSIONS : Nano size $TiO_2$ is easily penetration in the top 3mm of concrete surface. By the penetration $TiO_2$ concrete can be produced with the use of only 10% of $TiO_2$, by comparing the mixing types.

• 한국식물병리학회지
• /
• 제2권3호
• /
• pp.199-206
• /
• 1986

콩시스트선충 Race 3에 이병성인 대두품종 Lee와 저항성인 대두품종 Lee와 저항성인 Pickett을 공시, 3가지 다른 접종수준(식물개체당 1,760, 440, 110마리의 2기 유충)에 따른 선충의 침입과 시스트 형성을 조사하였고, 이병 뿌리조직의 형태적 변화를 관찰하였다. 선충의 침입율은 이병성 대두에서 접종수준간에 차이가 없었으나, 저항성, 품종에서는 접종수준이 높아짐에 따라 감소하였다. 그러나, 접종수준에 다른 침입율 차이의 정도는 시스트 형성, 즉 저항성과 직접적으로는 관련이 없는 것으로 나타났다. 이병성 대두품종에서 시스트 형성율은 최고접종수준에서 다소 감소하였고, 저항성 품종에서는 이병성 품종과 비교할 때 시스트 형성율이 현저히 낮아, 대두품종에서의 선충의 밀도변화는 선충의 침입보다는 선충의 생장에 관계가 있는 것으로 나타났다. 이병조직의 형태적 특징은 대두품종간에 그리고 감염정도에 따라 차이가 있었다. 이병성 품종의 뿌리조직에서는 syncytium이 형성되었으나, 여러마리 선충에 의해 감염된 부위에서는 syncytium이 접종 5일후에 퇴화하였다. 저항성 대두에서도 선충의 감염정도에 따라 이병조직의 형태변화가 다르게 나타났다. 이러한 조직병리학적인 차이는 이병성 및 저항성 대두에서의 콩시스트선충의 밀도변화에 영향을 주는 요인으로 사료된다.

• 농약과학회지
• /
• 제12권2호
• /
• pp.127-133
• /
• 2008

침투성 증진 물질로 fatty alcohol ethoxylate(FAE) 혹은 지방산 에스테르를 함유하는 dimethomorph 수용액을 오이 잎에 분무 살포하여 침투율을 측정하고, FAE의 각기 다른 분자내 친수기와 친유기의 구성에 따른 dimethomorph의 침투율을 조사함으로써 FAE에 의해 유도되는 dimethomorph의 침투 기작을 추론하였다. Polyoxyethylene mono-9-octadecenyl ether(ethylene oxide 부가몰수 6 몰, $C_{18=9}E_6$)에 의해 유도된 dimethomorph의 오이 엽면 침투량은 분무액 중의 $C_{18=9}E_6$의 농도와 dimethomorph농도에 비례하였다. 따라서 FAE의 엽면 침투와 그로 인하여 유도되는 dimethomorph의 침투성은 잎 표면으로부터 내부를 향하여 일어나는 단순한 확산 현상임을 알 수 있었다. 동일한 몰농도로 첨가된 지방산 에스테르와 FAE를 이용한 실험에서 dimethomorph의 오이 잎 침투성 증진에는 친유기로 octadecanol이 가장 효과적이었으며, 여기에 부가된 친수기 polyoxyethylene은 ethylene oxide(EO) 부가몰수가 20 몰까지 증가할수록 더욱 효과적이었다. 따라서 FAE 계면활성제의 친유기는 dimethomorph의 확산 침투가 용이해지도록 주로 오이 잎의 cuticular wax의 이화학적 성질을 변화시키는 역할을 하며, 20 몰 이하의 EO가 부가된 친수기 Polyoxyethylene은 FAE의 몰부피를 증가시킴으로써 FAE 자체의 확산 침투 속도를 늦추고 cuticular membrane 내에 오래 머물게 함으로써 dimethomorph의 침투가 용이하도록 친유기에 의해 변화된 cuticular wax의 이화학성을 오래 동안 유지하는 역할을 하는 것으로 추정되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.497-501
• /
• 2008

To improve occupants' safety in an emergency, crashworthy design is necessary to rotorcraft design and development. To improve crashworthiness capability, most of the crash energy should be absorbed by rotorcraft and the energy transmitted to the occupants should be minimized. To absorb the crash energy efficiently, the individual energy attenuation provided by landing gear, structure, fuel tank and seats should be considered totally. Especially, landing gear has the important role for crashworthy design because landing gear absorbs relatively large energy for the crash landing. In addition, military specifications require failure of landing gear shall not increase danger to any occupants by penetration of the airframe. To meet the specification requirements, failure mechanism should be prepared so that landing gear is collapsed safely and doesn't penetrate the airframe. In this study, design of failure mechanism which is necessary for the rotorcraft landing gear was performed and the results were presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.987-993
• /
• 2004

The status of mud-pumping in the existing railroad lines were investigated and real-scale tests simulating mud-pumping phenomena were carried out to analyze its mechanism. The penetration of ballast material into the subgrade and the cause of mud-pumping are explored. The results of the investigation and tests will be used to develop the new method and materials for the prevention of mud-pumping.

• Journal of Welding and Joining
• /
• 제17권3호
• /
• pp.26-35
• /
• 1999

On the laser weld production line, a slight alteration of the welding condition changes the bead size and the strength of the weldment. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in $CO_2$ laser welding. The relationship between the sensor signals of plasma or spatter and the bead shape, and the mechanism of the plasma and spatter were analyzed for the bead size estimation. The penetration depth and the bead width were estimated using the multiple regression analysis.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.18-23
• /
• 2002

Liquid phase mixing of impinging injector is a resultant byproduct from the momentum exchange between a pair of impinging jets and penetration of opponent jet. Principal aim of the present study is revealing the liquid phase mixing mechanism of split triplet impinging injection sprays, and thus extending our understanding on this particular injection element. Overall mixing extent is estimated from patternation tests by the use of purified tap water and kerosene to simulate the real propellant components, respectively, and with the liquid jet momentum ratio, a controlling mixing parameter, in the range of 0.5 to 6.0. Emphasis is placed on the effect of liquid sheet superposition and disintegration, and the results with detailed spray visualization revealed the fact that superposed liquid sheet disintegration is the main pathway of liquid phase mixing of split triplet impinging injector to yield enhanced mixing qualities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.198-201
• /
• 1997

The new system for identification of organic vapours and analysis method of mechanism between organic vapours and sensitive materials were attempted using the resonant resistance and resonant frequency of Quartz Crystal Analyzer (Q. C. A.). The resonant resistance shift means rheological changes in sensitive LB films occurred by the adsorption of organic vapours, while the resonant frequency shift represent the mass of organic vapour loaded in or on the sensitive LB films. It is thought that we can obtain more accurate response mechanism of organic vapour using the resonant frequency and resonant resistance diagram. The polymeric sensitive material were quantitively depositied using the LB method. In the experimental results, the adsorption behavior of organic vapour response can be decided by two type ; surface adsorption and penetration into sensitive material. Organic vapours had different positions in the Frequency-Resistance (F-R) diagram as to the kinds and concentrations of organic vapours. Thus F-R diagram can be applied to the development of one channel gas sensing system using the Quartz Crystal Analyzer.