• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.121-127
• /
• 2006

An Altari radish pre-processing system, which feasible to process automatically such operations as leaf and root tail cutting and root peeling, for kimchi production was accomplished based on the foregone serial studies. In this study, the performances of the developed prototype machine, considered as a commercializing level, were analyzed and evaluated. The prototype machine attached Tiny PLC automatic control system was performed the sequent function as the rate of successful peeling was more than 98% for the Altari radish less than 70 mm diameter of a radish. The operating efficiency of this was 9 see/each, 128 kg/h, and it means as much as $5{\sim}6$ times that of a woman labor's. The sanitation and taste of the mechanized-processed Altari radish kimchi was almost same as that of the handmade. And they were suitable for manufactory of kimchi as the both short term ripening and storing kimchi. Developed machinery with one peeling device and two peeling devices that compared with hand processing, it was analyzed that the break-even yearly working days were 28 days and 19 days, and the break-even yearly processing amount were 28,700 kg, 32,400 kg, respectively.

• Journal of Industrial Technology
• /
• 제35권
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Journal of the East Asian Society of Dietary Life
• /
• 제22권6호
• /
• pp.860-867
• /
• 2012

Codonopsis lanceolata serves as, an appetizing health food for its, characteristic flavor, taste, and texture:however, it requires a long and complicated cooking process. Therefore, this study conducted pre-processing procedures to improve the cooking process and Codonopsis lanceolata more easily. For processing efficiency, freezing and blanching were efficient for peeling and the rate of peel disuse. In addition the freezing process, effectively reduced the time spent in beating raw material. In the salinity test, freezing and blanching quickly increased salinity over 28 days. As the result of SEM cross-section tests showed that frozen Codonopsis lanceolata become porous, it's assumed that seasoning permeates into this cross-section efficiently. As the appearance of Deodeok-gui as significant differences according to the pre-processing methods, this study examined pre-processing methods(time spent in peeling, rate of peel disuse, time spent in beating out material, salinity, moisture content, texture, and the color) of Codonopsis lanceolata. After testing Deodeok-gui, it was found that freezing is effective, not only for process efficiency and cooking time reduction, but also for improving its qualities.

• Journal of Industrial Technology
• /
• 제31권A호
• /
• pp.45-51
• /
• 2011

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step (sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased at the second step (rolling process of sintered plate ; Series B). After the third step (re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process affects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at interface between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Journal of environmental and Sanitary engineering
• /
• 제6권2호
• /
• pp.89-108
• /
• 1991

Organophosphorus pesticide residues such as Diazinon, Fenitrothion and EPN in apple and effect of storage peeling and washing on removal of the residues from apple soaked in 3 kinds of pesticides solutions for 20 seconds were studed with gas chromatography-nitrogen phosphorus detecter(GC-NPD). Result obtained are as follows : 1) Average concentrations of DiaEinon, Fenitrothion, and EPN detected in apple of control group were 0.022, 0.007 and 0.008 ppm respectively. 2) Decreasing rates of Diazinon on 7 th, 14 th, 21 st, 28 th, and 35 th day after soaking apple on the pesticide solution were 41.3% , 68.6% , 87.0%, 96.9% and 99.5% respectively. In case of Fenitrothion were 46.9%, 66.3%, 84.9%, 93.2% and 97.3% and EPN were 45.7 %, 76.2%, 85.4%, 95.7% and 99.4% respectively. 3) The removal rate of Diazinon, Fenitrothion and EPN by washing with water alone were 93.7%, 70.6% and 51.5% respectively, and 97.1% , 78.4% ailed 76.5% by washing with 0.2% detergent solution respectively. The results obtained in this study have show that 3 kinds of pesticides detected in app- les were below the Korean standard for residual pesticides and pesticides contaminated in apples were decreased in considerable degree by washing with water and 2% detergent solution and removed almost completely after storage for 35 days (5 weeks). Therefore, it would be concluded that washing and peeling will be the most effective way for safely because more than 90% of pesticide exist in peel.

• Journal of the Korean Recycled Construction Resources Institute
• /
• 제7권4호
• /
• pp.341-348
• /
• 2019

In this study, we analyzed the problems of existing construction waste shredding technology to diagnose the problems of low quality recycled aggregates and to develop a new mortar peeling technique to produce high-quality recycled coarse aggregate for concrete. The purpose of this study is to verify the effectiveness of mortar peeling technique by doing simulation prior to on-site application and to check the quality properties of recycled coarse aggregate produced by applying a mortar peeling technique. We manufactured and installed High speed Rotating Grinder on-site and analyzed the correlation between mortar adhesion amount, dry density and water absorption rate of recycled coarse aggregate.

• Microbiology and Biotechnology Letters
• /
• 제21권4호
• /
• pp.329-335
• /
• 1993

Ascorbate oxidase activity in various cucumber tissue extracts was highest in young fruit peeling. Cucumber callus was induced from young fruit peeling and callus cell lines were selected for more than 7 months, which porduced high levels of ascorbate oxidase and had a high growth rate. Induction of callus was optimized with Linsmaier-Skoog(LS) medium at 25$^{\circ}C$ in dark phase. Ascorbate oxidase activity reached a maximum at 5 days after transfer to LS basal liquid-medium ant then declined. The enzyme activity in callus cells was stimulated by addition of 10${\mu}$M $CuSO_4$ in the early logarithmic phase of growth. And also, adding 10${\mu}$M $CuSO_4$ at 3rd day 7th day of culture period, ascorbate oxidase activity in callus cells was maintained to high level. Maximum yield of ascorbate oxidase was found at the 25th day by flask shaking culture, but three-fold of ascorbate oxidase activity was obtained at the 16th day by jar fermentation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제35권3호
• /
• pp.281-291
• /
• 2022

Global warming is accelerating due to the use of fossil fuels that have been used continuously for centuries. Now, humankind recognizes its seriousness, and is conducting research on searching for eco-friendly and sustainable energy. In the field of solar energy, which is a kind of eco-friendly and sustainable, many studies are being conducted to enhance the output performance of the module. In this study, the output improvement for the shingled module structure was studied. In order to improve the output performance of the module, the thickness of the encapsulant was increased, and the lamination process conditions have been improved accordingly. After that, the crosslinking rate was analyzed, and the suitability of the lamination process conditions was judged using this. In addition, a peeling test was conducted to analyze the correlation between the adhesion of the encapsulant and the output performance of the module. Finally, the optimization for the encapsulant material and the lamination process conditions for high-power shingled modules was established, and accordingly, the market share of high-power shingled modules in the solar module market can be expected to rise.

• Korean Journal of Plant Resources
• /
• 제27권1호
• /
• pp.72-79
• /
• 2014

This study was investigated the changes in quality of peeled chestnut according to peeling method, including abrasion and knife, and 3 kinds of storage temperatures. The weight loss rate of peeled chestnut during storage period was observed in all treatment groups, peeling methods showed no difference of the loss. However, the moisture content of peeled chestnut during storage in all treatments showed a tendency to decrease. Moisture content of the abrasion peeled chestnut in all treatments was higher than that of the knife peeled chestnut. In the case of a, b, and ${\Delta}E$ value of peeled chestnut chromaticity increased during storage in all treatments, whereas, L values decreased during storage. But, browning of abrasion peeled chestnut was higher than that of the knife peeled chestnut. The hardness of the abrasion and knife peeled chestnuts were the highest in $-1^{\circ}C$ storage, soluble solid content was decreased with storage time in all treatments, but showed a tendency to increase within 24 days. Palatability and texture of peeled chestnuts decreased in all treatments during storage period, 15 days after storage decreased rapidly. Thus, results showed that peeled chestnuts stored at $4^{\circ}C$ and $2^{\circ}C$ were rapidly decreased in the quality after 15 days, whereas, peeled chestnuts stored at $-1^{\circ}C$ slowly decrease in the fruit quality. It can be recommended that chestnut in vacuum film is good to maintain at $-1^{\circ}C$ storage for 15 days. Also, if we can reduce the browning of abrasion peeled chestnut, we will produce peeled chestnut of high quality.

• Journal of Conservation Science
• /
• 제24권
• /
• pp.57-66
• /
• 2008

It is reported that excavated carbonized wooden objects tend to have more peeling and deformation stemming from the coexisting of different types of parts of objects. However, there is little research results on this. In this experiment, the sugar alcohol method was used and then compared with the results of the PEG4000 method which widely uses. This research targets: prediction of strength by weight increase, investigation of the dimensional stabilization effects by measuring the rate of shrinkage change, condition of drug penetration and change of wood texture by using a scanning electron microscope. As the results, the PEG4000 method needs a phased approach over 80% impregnation. On the other hand, the S A method remains steady from over 40% impregnation. The Deformation of carbonized wooden objects used in this experiment is considered as the phenomenon by shrinkage of non-carbonized parts. The PEG4000 method is verified the shrinkage in the samples treated with 20%, 40% and 60%; the S A method is verified the shrinkage in the samples treated with 20%.