• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.75-75
• /
• 2004

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.82-82
• /
• 2004

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.37-40
• /
• 2013

Plant factory industry as a new agriculture is in the spotlight. In this paper, we experimented plant factory applied photovoltaic system and LED lighting. For growing the plant, red, blue and white LED were placed into 1:4:3. Electric power generated by the photovoltaic system was supplied on DC power supply instead of AC. The designed and experimented power generation amount per day of photovoltaic system were 2,860 Wh and 2,272 Wh respectively. Plant has not been grown at the dead space of LED lighting so it is required to array LED lighting.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1385-1390
• /
• 2009

In this study the purpose is development of passive cooling system for telecommunication cabinet used by latent heat material. This cooling system is not required for electronic power. It was tested for the performance of the telecommunication combined latent heat material with $48^{\circ}C$ of phase changed temperature and heat pipe. At $45^{\circ}C$ of outside temperature, when heater power was 1,000 W and 1,500 W, the inside temperature of the cabinet was $55^{\circ}C$ and $62^{\circ}C$. This system was showed better performance than the other systems.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.324-329
• /
• 2008

The liquid cooling effect of a natural convection type radiator by using the PCM has been investigated experimentally. The radiator size is $423{\times}295{\times}83$ mm and PCM container size is $398{\times}270{\times}26$ mm. The objective is elapsed time higher than maximum time to reach for maximum operating temperature of a general liquid cooling radiator. This study, in order to study on the effects of the phase-change phenomenon, carried out the various mass flow rate, input electric power, ambient and melting point of three type PCM. For the above experimental parameter, the melting time was performed about 180/250/560 min at input power 150 W and ambient $30^{\circ}C$ from using the three type PCM(PCM_S1/S2/S3) respectively. Furthermore, the effects of the thermal dissipation was decreased higher input power than lower input power at heating block and melting time of PCM. However, the effects of mass flow rate did not nearly affect of the thermal performance especially.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.61-65
• /
• 2017

In this paper a prototype of high frequency heating power supply system based on the high frequency heating principle is designed to take the place of acupuncture, moxibustion, warm dressing treatment and some other traditional physical therapy methods. Which possess the advantages of low cost, convenient, easy operation and good effect. The high frequency heating power supply can generate a pulse voltage of more than 1KV with 300KHz switching frequency to heat the patient's skin. The skin temperature can reach to $41{\sim}42^{\circ}C$. The peak current control method is used to maintain the skin temperature in the designed range. The design of the main circuit is based on the flyback converter topology. An easier and practical design method is proposed in this paper. The power supply system prototype is verified to be stable and reliable by both the simulation and experimental results.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.55-63
• /
• 2021

The construction of shield tunnels is being expanded from the small-bore tunnels such as power, telecommunications, water supply, and sewerage pipes to the large bore tunnels such as road and railway tunnels with the advancement of the shield TBM (Tunnel Boring Machine) manufacturing technology. Accordingly, the construction of twin shield tunnels is increasing. Peck (1969) reported that the surface settlement trough is well described by a Gaussian distribution on a single shield tunnel. Hereafter, many studies about the surface settlement trough were performed by the field measurement, laboratory model test, and numerical analysis. This study confirmed that the additional surface settlement trough induced by the 2^nd tunneling were well described by using each Gaussian curve for the right and left sides of the settlement trough.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.519-524
• /
• 2001

These days, $Al_[2}O_{3}$ ceramic use all over the industry because dynamic function and special properties to compare traditional material. But $Al_[2}O_{3}$ ceramic is high hardness and brittleness materials. For this reason, it is very difficult to process. Therefor, In this paper, it was investigated that laser process parameter, which can produce appropriate quality of $Al_[2}O_{3}$ ceramic microhole machining utilized Nd:YAG laser and Excimer laser.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1279-1282
• /
• 2005

본 논문은 초고속 전송을 위해 설계된 HCOC(High Capacity Orthogonal Code) 기술을 적용한 Multi-Code Spread Spectrum System에서 발생할 수 있는 PAPR(Peck to Average power Ratio) 문제해결을 위한 연구이다. H(HCOC)MC-SS 시스템의 PAPR 감소를 위해 기본적인 SLM(Selected Mapping) 기법을 적용하였으며, 또한 SLM 기법의 단점인 많은 계산량 감소를 위해 Recursive 방법을 적용한 Recursive SLM HMC-SS 시스템을 제안하였다. 컴퓨터 시뮬레이션을 통해 제안하는 시스템을 검증하였으며, 또한 초고속 전송을 위한 16 QAM-SS 시스템과 $4{\times}4$ HMC-SS 시스템의 성능을 비교 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.73-76
• /
• 2006

본 연구에서는 독일 율리히 연구소에서 도입된 면적 200mm*200mm의 연료극 지지체 평판형 SOFC 셀 및 금속 분리판 40장을 적층하여 5kW급 SOFC 스택을 제작하고 연속운전을 수행하여 운전특성을 분석했다. 본 연구를 통해 도입된 5kW급 SOFC 스택은 외국에서 시도된 적이 없는 평판형 SOFC스택의 가압운전을 시도해 보는 것으로서, 스택의 임계압력 특성을 확인하고, 이를 바탕으로 가스터빈-연료전지 하이브리드 시스템에서의 SOFC 스택 가압 운전기술을 확보하는 것이다 이러한 목적을 위해 본 연구에서는 상압형 5kW급 SOFC 스택 운전시스템에 대한 구성과 설계, 전반적인 운전 특성평가 (40셀 스택 운전 열 사이클 시험 연료 전환 $(H_2{\rightarrow}pre-reformed\;gas)$, 1200시간 연속운전 등)가 이뤄졌다.