• 정보처리학회논문지C
• /
• 제12C권6호
• /
• pp.901-906
• /
• 2005

본 논문에서는 초고속 전승을 위해 제안된 HCOC(High Capacity Orthogonal Code) 대역확산(Spread Spectrum) 시스템의 높은 PAPR(Peak power to Average Power Ratio)을 줄여주는 새로운 MHCOC (Mapped HCOC) 대역확산 기술을 제안하고, 같은 비트 수를 전송할 수 있는 기존의 MQAM 대역확산 시스템과 비교 분석한다. 또한 전송 채널의 상황에 따라 알맞은 데이터 서비스를 하는 QoS (Quality of Service)를 만족시키기 위해 제안한 시스템의 적응성에 대하여 연구한다. 컴퓨터 시뮬레이션을 통하여 제안한 시스템의 성능을 평가 및 분석하고, 기존의 시스템과 비교 분석한다.

• 한국레이저가공학회지
• /
• 제8권1호
• /
• pp.27-37
• /
• 2005

During laser spot welding of the braun tube electron gun, phenomena such as serious spattering and oxidative reaction, etc. were occurred. The spatter occurred from weld pool affects the braun tube, namely it blocks up a very small hole on the shadow mask and causes short circuit between two poles of the electron gun. We guessed that high power density and oxidative reaction are main sources of these problems. So, we studied to prevent and to reduce spatter occurring in spot welding of the braun tube electron gun using pulsed Nd:YAG laser. The characteristics of laser output power was estimated, and the loss of laser energy by optical parameter and spatter was measured by powermeter. The effects of welding parameters, laser defocused distance and incident angle, were investigated on the shape and penetration depth of the laser welded bead in flare and flange joints. From these results, the laser peak power was a major factor to control penetration depth and to occur spatter. It was found that the losses of laser energy by optic parameter and sticked spatter affect seriously laser weldability of thin sheets.

• 에너지공학
• /
• 제28권4호
• /
• pp.94-102
• /
• 2019

본 연구는 집단에너지 사업자들의 최대 열수요가 발생할 때의 열원설비 운영현황을 분석하여, 이를 수익 최대화 관점에서 현재 설치되어 있는 설비의 운영 최적화 방안을 도출하여 제시하고, 도출된 결과를 토대로 해당 열부하에 대한 CHP(Combined Heat and Power), PLB(Peak Load Boiler) 등의 최적 설비용량 구성방안을 제시함으로서 사업자들이 운용상태까지 고려해서 보다 경제적으로 설비투자를 할 수 있는 가이드라인을 제공하고자 하였다.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.61-65
• /
• 2017

In this paper a prototype of high frequency heating power supply system based on the high frequency heating principle is designed to take the place of acupuncture, moxibustion, warm dressing treatment and some other traditional physical therapy methods. Which possess the advantages of low cost, convenient, easy operation and good effect. The high frequency heating power supply can generate a pulse voltage of more than 1KV with 300KHz switching frequency to heat the patient's skin. The skin temperature can reach to $41{\sim}42^{\circ}C$. The peak current control method is used to maintain the skin temperature in the designed range. The design of the main circuit is based on the flyback converter topology. An easier and practical design method is proposed in this paper. The power supply system prototype is verified to be stable and reliable by both the simulation and experimental results.

• 대한전자공학회논문지TC
• /
• 제45권12호
• /
• pp.42-48
• /
• 2008

차세대 무선 통신 시스템은 멀티밴드/멀티모드 동작이 가능한 RF 송수신기를 필요로 하고 있다. Polar transmitter는 효율적인 switched-mode RF 전력증폭기를 사용함으로써 높은 효율성을 얻을 수 있기 때문에 EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code Division Multiple Access) 및 WLAN (Wireless Local Area Network)과 같이 고속의 데이터 전송율을 지원하는 시스템에 적합한 것으로 알려져 있다. 본 논문에서는 수신단의 구조에 변화를 주지 않으며 또한 추가적인 정보의 전송이 필요 없이 기존 수신기를 그대로 사용할 수 있는 PAPR (Peak-to-Average Power Ratio) 감소기법을 OFDM (Orthogonal Frequency Division Multiplexing) polar transmitter에 적용하여 그 성능을 평가하였다. 이 방법은 polar 변조된 신호에 대하여 피크 윈도잉을 사용한 것으로 다양한 윈도우 형태와 길이를 적용하여 비트오율 (Bit Error rate; BER)과 오차 벡터 크기 (Error Vector Magnitude; EVM)를 측정하였다. 모의실험 결과, 제안된 기법은 효율적인 PAPR 감소와 더불어 클리핑으로 인한 대역의 왜곡 (out-of-band distortion)이 감소함을 관측하였다.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1199-1205
• /
• 2014

A power system configuration has been increasingly advanced with a number of generating units. In particular, renewable energy resources are widely introduced due to the environmental issues. When applying the renewable energy sources with the ESS (Energy Storage System), the ESS is the role of a potential generating resource in the power system while mitigating the output volatility of renewable energy resources. Thus, for applications of the ESS, the surrounding environment of it should be considered, which means that capacity and energy of the ESS can be affected. Moreover, operation strategy of the ESS should be proposed according to the installation purpose as well as the surrounding environment. In the paper, operation strategy of the ESS is proposed considering load demand and the output of renewable energy resources on a hourly basis. Then, the cost of electrical energy is minimized based on the economic model that consists of capital cost, operation cost, fuel cost, and grid cost for a year. It is sure that peak-shaving effects can be achieved while satisfying the minimum cost of electrical energy.

• Journal of Multimedia Information System
• /
• 제7권3호
• /
• pp.231-238
• /
• 2020

This work presents a fully analog baseline wander tracking and removal circuitry using high-pass filter (HPF) based R-peak detection and quadratic interpolation that does not require digital post processing, thus suitable for compact and low power long-term ECG monitoring devices. The proposed method can effectively track and remove baseline wander in ECG waveforms corrupted by various motion artifacts, whereas minimizing the loss of essential features including the QRS-Complex. The key component for tracking the baseline wander is down sampling the moving average of the corrupted ECG waveform followed by quadratic interpolation, where the R-peak samples that distort the baseline tracking are excluded from the moving average by using a HPF based approach. The proposed circuit is designed using CMOS 0.18-㎛ technology (1.8V supply) with power consumption of 19.1 ㎼ and estimated area of 15.5 ㎟ using a 4^th order HPF and quadratic interpolation. Results show SNR improvement of 10 dB after removing the baseline wander from the corrupted ECG waveform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1267-1269
• /
• 1999

This paper studies on arrangement of load correlation coefficient for advanced load management. To accurate load correlation coefficient, we used two real factors, electrical energy(kWh) and peak load current of pole transformers, acquired by measuring instrument. Out of several correlation equations, we find that the quadratic equation is the most accurate to express peak load current and working electrical energy. If the data is located in the outside of ${\pm}3{\sigma}$ it is discarded. For load management, we rearranged load correlation coefficient considering +2${\sigma}$ at load correlation equation. Comparing conventional load correlation coefficient with rearranged one, we can get the result of error reduced and it is adjacent to the actual data. It will be used peak load forecasting from working electrical energy and we are able to prevent from the damaging of pole transformer due to overload.

• 한국통신학회논문지
• /
• 제32권10C호
• /
• pp.1010-1018
• /
• 2007

본 논문에서는 OFDM (Orthogonal Frequency Division Multiplexing) 신호의 PAPR (Peak-to-Average Power Ratio)을 효과적으로 감소시키기 위한 Clipped Companding 기법을 제안한다. 제안된 기법은 시스템의 복잡도와 비트오율 (Bit Error Rate; BER) 성능 측면을 모두 고려하기 위해, 기본적으로 Companding 기법을 기반으로 하고 Clipping과 Companding 기법이 순차적으로 결합된 두 단계로 구성된다. 제안된 기법의 첫번째 단계에서는 시스템의 BER 성능에 영향을 미치지 않을 정도의 피크 신호들을 잘라내게 되고, 두번째 단계에서는 Wang이 제안한 ${\mu}-law$ Companding 기법을 사용하여 효과적으로 PAPR을 감소시키게 된다. 모의실험 결과, 제안된 Clipped Companding 기법은 기존의 ${\mu}-law$ Companding 기법에 비해 PAPR을 좀 더 감소시킬 수 있으며 동시에 시스템의 BER 성능은 거의 동일하게 유지시킬 수 있음을 확인할 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.58-64
• /
• 2013

In this paper, two new flip-flop circuits with PCRAM latches that are FF-1 and FF-2, respectively, are proposed not to waste leakage during sleep time. Unlike the FF-1 circuit that has a normal PCRAM latch, the FF-2 circuit has a selective write latch that can reduce the switching activity in writing operation to save switching power at sleep-in moment. Moreover, a sequential sleep-in control is proposed to reduce the rush current peak that is observed at the sleep-in moment. From the simulation of storing '000000' to the PCRAM latch, we could verify that the proposed FF-1 and FF-2 consume smaller power than the conventional 45-nm FF if the sleep time is longer than $465{\mu}s$ and $95{\mu}s$, respectively, at $125^{\circ}C$. For the rush current peak, the sequential sleep-in control could reduce the current peak as much as 77%.